Reviews
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
I was able to install it this time.
I was able to install it on a new 23 year old car. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Interference with exhaust pipe of PowerBOX.
Exhaust pipe is SP Tadao's PowerBOX and Silencer is YOSHIMURA. However, when we tried to install the bracket, the bracket interfered with the exhaust pipe and could not be installed. I was able to install the bracket by shaving 5mm off the interference part with a grinder.
As for defenses, this will certainly protect Radiator.
It seems to be easy to wake up in case of a fall. (^^)
It looks Matcho and it looks good!
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
No interference with POWER BOX
I installed it on my CRF-RALLY (MD47) and was not sure whether to purchase it or not because I had installed SP Tadao POWERBOXPipe item number:CR2-PB-21 on the exhaust pipe and there was a possibility that it might interfere with the power box. (Incidentally, ZETAPipeTank Guard item number:ZE55-1010 was answered that the POWER BOX part would hit the tank, so we decided not to purchase this item. I bought it with the intention of shaving it with a grinder if the need arises.
As a result, the Limit was not hit. Installation was not too difficult, and there was no interference with the frame or cowl. The style is now more adventure-like. The protection is still unknown because I haven't run or rubbed it yet, so I give it 4 stars.
DirtFreak's response to my last inquiry was very fast, and their response was very thorough and favorable.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Tank Guard for current MD47RLY50
I'm glad to see a good product on the market, as there are only a limited number of Guard types for the current crf250RLY50MD47. The Guard itself is safe in the event of a fall, but I am concerned about the strength of the bracket on the body side of the front mounting bracket, but this is not a problem with the product. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Engine Guard for current MD47RLY50
The quality is solid and seems to protect the vehicle body. If the reinforced pipe under the under guard can withstand obstacles, I will try to get over them as soon as possible. View detail
JA65 cannot be installed.
ZETA ZE55-8030 is attached with bolts, but JA65 is attached by welding. (Please refer to the photo) In other words, it cannot be attached without modification. Please keep this in mind when purchasing. View detail
Stylish
I decided on this one because I didn't like the design with the wider feet, and because I originally wore a ZETA Handlebar Guard, so I wanted a product from the same manufacturer.
I like the product itself because it makes little statement.
I don't know about the protective properties because I haven't fallen over, but I don't care because I'm more concerned about appearance.
View detail
Stylish
I like the upper volume of the parts. The appearance of the installed parts is rugged and rugged, but when you ride on the car, it doesn't look so assertive, and the image is slim. View detail
It has tightened up.
Select is Style-oriented, as it is rarely driven on forest roads.
The product is highly satisfactory in terms of design, quality, and paint job. As expected from DirtFreak.
The Style is one size thicker than OEM, and the semi-gloss coating tightens up the Style.
I would have liked it to be thicker, but I am generally satisfied.
The interference with the YOSHIMURA Exhaust System, which we were worried about, was no problem at all, and the Clearance fit with plenty of room to spare.
I'm glad I bought it
View detail
Somehow better than expected.
I thought it would be a little difficult to fit the Bolt on the Right Side, but it turned out to be acceptable because I was able to make the lower bolt fit 10mm longer than the upper bolt by force. The under guard was no problem if I changed to a longer bolt on the One Side. (I removed the paint from the Tap part in advance.) The oil replacement is in the way, but there is a gap in height, so a tool may be able to fit in there. I have not tested the strength reinforcement, which was the main purpose of this project, so I'll see how it goes.
Supplemental YOSHIMURA's muffler (Down) was interference OK (Clearance about 2mm)
View detail
Design is great! How practical is it?
The quality of DirtFreak's products is unmistakable. The paint and design are both excellent. I don't want to drive on forest roads, so I don't want to have any crashing performance.
Clearance with YOSHIMURA Exhaust System, which we were worried about, was sufficient and there was no interference at all.
Installation was done with a simple push-in. The hole position was perfect.
It is almost a Fashion-like Custom, but I am personally satisfied with the way the body of the car looks tighter. It is just as I expected.
View detail
I got beat up… (Tears)
I was excited to purchase ZETA's Under frame to customize my new model CROSSCUB110 to make it look like a SCRAMBLER. I removed the main pipe center cover according to the instruction manual, removed the handlebar post cover and front cover, and then removed the main pipe cover to complete the cover removal. I had to be very careful not to break the cover, so I had to use a lot of nerve (sweat). Next, the bolt of the headlight bracket was removed, the bracket was temporarily attached, and the bolt of the footpeg was removed to complete the preparation. Finally, I aligned the main pipe connection with the bolt position on the footpeg in order to install the main pipe, but … the screw holes did not align!
I contacted DirtFreak in a panic. The Parts I purchased cannot be installed on the New ModelCROSS CUB." And that … We are considering developing one for the New ModelCROSS CUB. and it turned out that I was completely brave. I gave up and decided to wait for the Under Frame Kit for the New Model CROSS CUB. I recommend everyone to check the compatibility with the parts of the previous model before purchasing a New Model.
*All ratings are in the middle because the installation could not be completed.
View detail
Design is ○
The design is unique, but the Pipe diameter seems a bit thin.
In fact, when the moss is removed, it is the same with all the other products.
The product itself is quite sophisticated and can be installed without difficulty.
View detail
High Cost performance
Compared to Under Guard made by other companies, it is relatively cheap and has a good texture.
For customization, the emphasis is on the appearance of the product, which is Recommendation.
I installed it on my ja45CROSS CUB, and I was able to install it by simply replacing the Bracket on the Headlight guard and the Bolt on the Center Stand. I think it can be installed in 30 minutes if you are familiar with it. One point of concern is that the Under frame must be installed in the bolt hole of the For center stand, because the bolt hole is directly under the engine, and if the Under frame is installed there, the engine will break when it hits the underside. If you want to run off-road, you should recommend the Under Guard to be installed on the main frame.
If you are using the Up type exhaust system, please be careful as it may interfere with the exhaust system.
Since the clearance with the lower part of the engine is quite narrow, it is better to assume that almost no exhaust system can be installed except for the one that is guaranteed to fit.
Because it is directly attached to the bottom of the Engine, there is a possibility of damaging the Engine when it is mounted with a heavy shim, etc. Therefore, it is better to cut or bend the Under GuardFrame.
View detail
It's luxury
Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. We recommend this product to those who love and like bikes. Reliable product, fast delivery, I am very satisfied with the result. I am very satisfied. I will order again and trust. Thank you, I love you. I will order today. Delivery is fast and I am very satisfied with the product. I have ordered so many products from Webike. However, these high-quality and in good condition products are really reliable. For those of you who love and love bikes, Now I recommend this product. Reliable product, fast delivery, very satisfactory results I like it very much I will order again and trust thank you Love it I'm taking orders today View detail
Off-road feeling up!
Installing the Frame wasn't too difficult if you can remove the Covers. (I remove the cover every time I install a part, so I left the top matching nail on the cover and shaved off a few places. (Probably this is the biggest Neck! Honda, too many nails even though there is also a Screw stopper!
Under Guard Plate is installed on the frame, but the paint of the frame is embedded in the nut part, so I recommend you to tighten and loosen the bolt only a few times to remove the paint from the screw hole. It was quite tight at first. If you put the Plate on from the beginning and give it a shot, it will be hard to tell how hard the screw is and you may put the Bolt in at an angle. Like other people have written. "Bolt hole not dug vertically." I didn't have the feeling that I was going to be able to do that (a little bit, but only patronizingly! LOL)
Normal muffler and ZETA Exhaust System are guaranteed to be installed, but I was worried because I have YOSHIMURA Exhaust System installed. I was relieved when it didn't interfere!
The plate is not the same shape as the frame and is a little warped. 1 or 2 mounts of the bolt on the front side, the bolt on the rear side floats more than 1cm. The plate is made of aluminum, so if you hold it down, the bolt will be applied. Once the bolt is applied, you can tighten the whole bolt gradually (sometimes loosen it and repeat several times). If you tighten it once every few days, it will fit perfectly.
I didn't find the accuracy to be that bad in my opinion.
My overall assessment is that it looks and feels more Off-road, I wanted a CT110 HUNTER CUB (it didn't come in Made in Thailand) and now I'm a little closer (maybe?). I wanted to get the CT110 HUNTER CUB but it was not made in Thailand. The delivery time is faster than other companies (SP) (SP is late November for an order placed on April 1! I can't wait! The price is also a little cheaper! So, I'm satisfied!
View detail
The accuracy of the Screw is a bit …
Trusted ManufacturerZETA
However, the Screw holes are not dug vertically enough & hellip; I'm worried about them.
I had too much trouble installing the Plate, so I had to re-run the long Screw at the home center.
If the Plate is not deformed well, it does not attach well. The accuracy is a little too bad.
Protection is not a concern at all.
View detail
I installed it in the Exhaust System Up Type.
It was possible to install it at the same time as sp Mukawa's Suk RumbleExhaust System.
Perhaps the Exhaust System Up Type can be installed in Other Brand Products.
There will be quite a bit of space between the Under Guard and the Engine, so this may be a bit of a concern for everyone except those with OEM exhaust systems.
View detail
Installation accuracy is low.
Purchased for forest road touring.
The screw hole to fix the Frame and Plate is obviously at an angle.
Installation is very Stress full with fine tuning.
I do maintenance such as replacing tires and chains by myself, but this time it was difficult.
12Socket to remove the Light Guard bolts on the CUB (Spanner lost.) You may need to ask the shop for a proper tool if you don't have a proper tool, as you may need a few different types of hexes.
View detail