Reviews
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
Communication between Webig and the manufacturer is slow because the product is made overseas.
I ordered in February and received it in March.
As mentioned in other reviews, the Quantity:Pair (for Left and Right) However, there was a spatter in the Pipe and a large rattling sound was heard, so I had the One Side returned and replaced.
The replacement product arrived in late April and I finally tried to install it during the GW holidays, but the holes were not aligned …. Unfortunately, it was not the level that can be adjusted by drilling a long hole.
As of May 14, I am in the process of requesting a return & return Gold.
I realize that it has already been about three months.
It is a pity that I cannot install it because I like the shape of the product.
It had been a long time since I had seen such a ha-gap foreign product.
However, I think Mr. WeBig's response is good.
View detail
I was able to install it without any modification.
By adjusting the mounting, I was able to install it neatly and without any modification at all. I think the cost performance is high. View detail
Engine Guard
This is the first time I have purchased and installed Engine Guard. 。 After some trial and error, I managed to install it. 。 I am very, very satisfied. View detail
Protective Crash Frame
About quality and texture: aluminum and single wielded together to form the frame - Great About the feeling of use Products to buy together: None Difficulty of installation: 6/10 - require jack to push up the engine Cost performance and comparison with other products: Normal - around the same cost About shipping and packaging; PERFECT Any concerns, cautions, or advice when purchasing: The instalation was not perfect, the hole on the frame required to be widen as this messed up the alignment of the screws. View detail
Hmm
Scheduled to arrive in May, but arrived in March ahead of schedule.
When it came time to start the GW installation.
Some Screw sizes are slightly too Large.
The Female Screw on the Engine side has been shaved and started.
Abandoned installation in the middle of the project.
View detail
Large Variety Satisfaction
It was shipped from overseas and was delivered 1.5 months earlier than the scheduled date.
The packaging was well packed with cushioning material and was very careful.
Thank you very much.
It is surprisingly heavy, but since it is steel, I think that's about it.
Motorcycle will be installed after delivery.
I am looking forward to seeing the cosmetic fit.
If I find something better, I would like to buy it again.
View detail
Maybe it needs a little tweaking.
It depends on the type of car and the manufacturer. In my case, both engine bolts in Included Parts:were Nut, so I was worried about Torque, so I welded one of them to be Bolt&Nut like OEM and made it into Engine bolt. That is all. View detail
It was worth the wait.
I considered givi and sw-motech, but this one was the best pin and I bought it.
Originally scheduled to arrive in early December, but arrived a month early and we're happy!
The installation was done by looking at the Instruction Manual that came with it because I couldn't find it on the Net.
The bracket under the Radiator was installed in the wrong direction.
I'd give it four stars for protection, but I'd have to mock it up to find out;
View detail
It's well made.
I bought this because I wanted a solid Engine Guard.
I like it because it doesn't feel uncomfortable like an OEM Product.
Installation was not difficult.
View detail
Fits: HONDA CRF 1000L Africa Twin DCT - silver
The installation of the UpperGuard
The bracket on the UpperGuard is too short to be installed. View detail
Fits: HONDA CRF 1000L Africa Twin DCT - silver
The installation is …
As for the UpperFrame installation, the fitting of the bracket under the light is not good and needs to be modified. View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
P.S
I would like to add that you should always apply Thread compound to the socket bolt of the Hex with the Engine Frame with Slider. If you think the frame is not stiff enough, we recommend you to use it. Not recommended View detail
Insurance for protection in case of emergency.
I bought it for the training of figure 8 and Gymkhana in the trunk training as Rider, I installed it and ran several thousand? I installed it and ran a few thousand? Fortunately, I don't fall down, but it's worth it if you think of it as insurance for protection. View detail
Just in case.
Engine Guard is a Material:Although the Slider of Plastic was used, the scratch was made in the Engine crank cover by standing on the side stand. As an insurance policy, it is a reassuring weapon. When I installed it, I had a little trouble only with the Left Side (Clutch Side), but other than that, I could easily work with general hand tools. View detail
Installation gives you peace of mind.
It took a bit of time to get it to me because it was ordered from abroad, but it arrived safely. It was very well packed, but the quality was excellent:Pair (for Left and Right) Both of them were scratched and the paint was peeling off. I had a bad feeling about this, but as I expected, the dimensions were not accurate enough to easily install it. I have to widen the bolt holes to fit the bolts and the quantity:Pair (for Left and Right) It is a long Bolt that is connecting the Original is a normal Bolt, but the one that comes with it is a long Bolt. This is a double-sided nut with a screw on both ends. In addition, because this nut has a resin in it to prevent loosening, even if you turn it from Both Sides, you can only turn one side. It screws in and out. When I tried to change to a normal nut, the Pitch does not fit instead of the MScrew. Also Quantity:Pair (for Left and Right) The center of the welding nut of the joint part of the joint part of the Bolt cannot be screwed in because the center of the welding nut is out of alignment. It was such a difficult work, but I think that the person who can do some processing can install it. It looks very compact and sturdy. It seems to protect the engine in the unlikely event of a fall. View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
Accuracy X
Right does not fit at all:I hung up a little 2pcBolt and forced it on with the force of the screw
I don't know if it's gonna bite off the Bolt
It's XSR700 compatible, but I don't think it's something you can call compliant
It's cheap and good looking, but..
View detail
with a walking stick before you die
I bought it and installed it because it was less than half the price of the Babyface product I had been wearing for some time
I was able to install it with no problems However, the installation is done by hand by inserting it into the groove hole and turning it
View detail
Best Protection Effect!
Collided with a wild boar that jumped out and hit an invisible wall in Inoya, Toyama Prefecture on October 5, 2019 The bike fell over with a blown up and went sliding with sparks flying off the motorcycle I had a feeling that it was going to break Large, but thanks to this Engine Guard, there was almost no damage It wasn't View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
Good shape?
I've been looking for different Engine Guards, and I've found one View detail
Fits: YAMAHA XSR 700, YAMAHA MT-07, YAMAHA XSR 700
The quality is too bad
Installation is easy with a bolt on and a torque wrench 。 It seems to work reasonably well
However, the quality is too bad! The paint is flaky when you press your finger on it, but there are pieces of steel in the PipeGuard Caracalla And sound 。 I can even hear it while driving 。 At first I thought it was a noise from the motorcycle itself, so I had to check it several times while riding was 。 I have been using various products from overseas parts manufacturers, but they are not as good as the domestic ones I've never seen such a bad product, even though it's not the standard
I installed it because I couldn't make it on time for touring, but if it's as cheap as the above, it's good If you are a person who is not a fan of the
They also accept returns, so if you're not in a hurry, give it a try
View detail