Reviews
Fits: SUZUKI V-Strom650 L2, SUZUKI V-Strom650, SUZUKI V-Strom650 XT, SUZUKI DL650 V-Strom, SUZUKI V-Strom650 L2 XT
Engine Guard installed
Installation should not be a problem if you have some knowledge of maintenance.
An Engine Guard was added to protect the engine in the event of a runaway and to mount the Fog Lamp.
View detail
Fits: TRIUMPH Thruxton R, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Speedmaster, TRIUMPH Street Twin, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100 Black, TRIUMPH Bonneville T100, TRIUMPH Thruxton, TRIUMPH Speed Twin 1200, TRIUMPH Speed Twin 900
Compact.
Installed in my wife's car 。 He has never had to stand up and walk away before, but he said he feels uneasy without it. 。 We selected Engine Guard with a sturdy-looking three-point stopper to support the vehicle body and protect the legs in the event of a fall.
Color in the picture on the Product Page:It looked Gray, but it is actually Black as the description says! 。 It is inconspicuous in the black of the vehicle body, but when you stand astride the Motorcycle, it sticks out just enough to ensure that you can cover your knees, giving you a sense of security. 。 Although quite pricey, the sturdy-looking Pipe is painted Beauty and has a convincing texture.
I had it installed at the shop when I took delivery of my new Motorcycle, because I didn't want to damage it! 。 One of the lower of the two front locations bolted to the car body and the Quantity after the Engine.:Pair (for Left and Right) I am confident that if I had installed it myself, I would have added a Wound somewhere in the one place where the two are connected.
View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
Wow that's cool
Was the one you received as per Image?
It looks really good on the SV, so much so that it looks OEM.
Was the installation difficult?
I pulled out the existing Bolt and installed it, but the picture in the Manual was confusing and I pulled out a different Bolt.
I thought it would be a good idea to check Net for photos of the installed condition before the work is done.
How was your experience with it?
I had to slowly let the Left Side fall to the ground at home,
Clutch lever and Bar End are scratched, but Shift Pedal is intact. If it is a standing fire type, it is surely effective.
[Included Parts:were they on?
neither too much nor too little
[Was there anything that disappointed you?
None at all.
[Opinions and requests to Manufacturer
Please publish the Color code. I want to paint the scratches with the correct color.
View detail
Slight gap at the front joint.
The parts were installed by a shop using Webig's parts installation service. When we first consulted HondaDream about installing the parts, we heard that there was a problem with the handlebar lock not being able to be locked due to interference with the front fork. The shop did a very careful work, and during the work, it was confirmed that there was interference with the front fork due to interference with the Horn, so the shop adjusted this area. If we pay attention to this area, it is possible to install the product as the manufacturer says, but the Horn and the wiring around the Horn also need to be adjusted. The Engine Guard and Tank Guard for NT1100 are rarely produced, so I had no choice but to choose this one. I think it is a satisfactory product. View detail
Tank Guard HEPCO & BECKER:Hepco & Becker
The Bolt holes are perfect and the precision and texture are good. View detail
It would have been better if it were a little wider.
The shop did a great job and installed the parts without any difficulty. I am satisfied with the installation, but I really had no choice but to choose the HepcoAndBecker product. View detail
Be prepared for the "what if?
I don't think it is strong enough to withstand Gymkhana, but it seems to guard Body and Engine well in case of a standing fall or a minor fall. It looks stylish and I am glad I installed it. View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
These are the Items I wanted!
I have been wanting these Items for a long time.
The installation is only to fasten Bolt, but since it is where the Engine is fixed, it requires force to loosen it, and it is also dangerous if it is not fixed Firmly.
It will look a bit lumpy after installation, but that is a sign that it is protected, so it looks cool.
It is reassuring to know that Guard is there to help in an emergency.
View detail
If anything, it's for looks.
For Guard, it's more like a Classic.
I wear it as a stylish point of view.
I am satisfied with the Large change in that respect, but it is still made.
It is solid and heavy in its own way.
I think there are pros and cons there.
I fell over once, but in the end it all depends on the situation.
Bar end mirrors are available.
There is nothing we can do about it and we have scratches on the Tank.
BoltQuantity on the Under Guard side for some reason.:2pcs.
I cut off the whole Plate because it didn't fit in any way.
Uses.
Not a good match with Performance damper
No, but the installation itself is possible.
View detail
Installation Bolt is …………………
The assembly work was easier than I had initially expected. However, it took some effort. The instructions for installing the tank guard suspension parts say to use two bolts, but when you insert one bolt, the hole for the other bolt is out of alignment, so it won't fit. Hepco&Becker is a manufacturer in Germany, and recently the quality of manufacturers in Germany has dropped to the level of China. View detail
Engine Guard
[How is it used?
From city driving to touring
Was the one you received as per Image?
Almost as per Image
Was the installation difficult?
I asked Shop to install it.
How was your experience with it?
Increased peace of mind.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Standstill protection-Engine Guard
[How is it used?
RnineT is for a low center of gravity, so I knew it would be hard to stand and jostle, but I installed it just in case.
It's been six months since the car was delivered and we haven't had to take care of it yet. (⌒∇⌒)
Was the one you received as per Image?
We had the standard item from Dealer installed as is.
I was worried about the one from rizoma, but this one seemed to be more firmly guarded around the head.
I had this installed because I had the actual product.
I was not particularly concerned about Engine Guard.
Was the installation difficult?
I asked the Dealer at the time of delivery, so the degree of difficulty is unknown.
Probably, it should be Bolt On because it is a vehicle-specific product.
How was your experience with it?
Luckily, we have not been taken care of yet.
But this bar has more to offer than just serving as an Engine Guard.
I've seen people use it as a Mount for Fog light and ActionCamera.
There may be times when you use it that way….
[Included Parts:were they on?
I don't think there was any problem.
The optional Wonderlic ProtectionPad for Engine Guard/Tank Guard (item no. W35833-002) can be installed.
[Was there anything that disappointed you?
This does not mean that they are disappointing, but they do look a little stiffer.
That is cool, so I guess it is a preference.
I am planning to install an Under Cowl in the future, and I am wondering if I should remove the Engine Guard at that time, or keep the Engine Guard installed and install the Under Cowl. (I heard there is such an Under Cowl. I'm searching for more information now.)
View detail
I had a bit of trouble there, but it was done without a problem.
Since I am quite a beginner, I thought it would be quite a challenge, but I was able to install it without any problems, even though it was a bit of a challenge for one person. I think it would not be so difficult if two people work together, but I guess it means that there is nothing that one person can't do by himself. View detail
inch screw threads
Bolt and nut are not consistent, such as M8 is inch, M6 is millimeter, etc. Both bolt and nut are made of ordinary material and are likely to rust easily. It will be necessary to change to stainless steel bolt etc. soon. Also, it is not possible to install the bolt according to the Instruction Manual. First of all, you have to insert the connecting plug and temporarily fix the M6 bolt nut (it is hanging), and then two persons have to work together to install the bolt nut. View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
Sufficient protection.
The car was immediately damaged by a standing fire (Right Side) 3 days after delivery, but other than the Engine Guard, the damage was limited to the lower end of the Exhaust System Heat Guard, the Bar End, and the tip of the Mirror being slightly scraped off. The painted surfaces are just scratches that are not noticeable with a touch pan.
I'd like to avoid moss as much as possible in the future, but it's a good thing to know where I'm going before I fall.
View detail
good for my G310GS
it is a perfect product for G310Gs,it is very enought to protcet my motocycle and it looks is so cool,i suggest everyone to by this View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Good thing I left it on.
Since I had the dealer install it when I purchased the vehicle, I won't give an evaluation of the installability.
First, the appearance.
The car has a lot of black parts including the frame, and the black engine guard grows out of the black frame, so it doesn't feel unnatural even if it is covered with a silver colored Hend Cover.
And the important thing is that the protection is godly!
Quantity of so-called "standing moss" on a public road:Pair (for Left and Right) I defeated each of them once, and almost all of them had no damage except for the Engine Guard.
(This is only our experience. The results may have been different depending on how and where you fell)
When I tipped it to the Right, I had the Tandem Footpeg out, so the Wound was in the tip of the footpeg. If I had stored it, it would not have grounded.
Quantity in low position:Pair (for Left and Right) The end of the handlebar extends to the top of the handlebar, so the end of the handlebar won't be grounded by a mishap.
Therefore, it is easy to wake them up.
For the repair, I roughly dipped the paper file in it, blended it in, and painted it black with Touch pan.
It is recommended to wear it if you are not sure about your footing or leg strength.
View detail
This is my lifeline.
The vehicle weighs more than 100kg heavier than conventional motorcycles, which may cause the vehicle to bog down at low speeds or when handling it by hand.
We're about to reach double digits, and thanks to these Parts, Cowl is almost scratch free!
Not even my leg got caught! It sends a thin chill down my spine to think of how much damage I would have suffered without it.
As you can see, I can't protect the exhaust system's SmallWound, clutch pedal, rear brake pedal, etc.
There was no Damage until it affected self-running.
I think most people who buy this motorcycle will enjoy long distance touring.
When you are experiencing a significant increase and fatigue, you may find yourself standing up unexpectedly.
I think there is.
The scary thing about long-distance touring is that you may not be able to drive yourself.
You may want to consider buying one to lower your Damage.
I'm not sure what would happen if I fell while driving;
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
2021 rninet.
I wasn't sure if I could install it on my '21 rninet, but I did.
Compact, discreet and solid compared to OEM.
I think it is better to do the installation work by two people as much as possible.
You will need someone to hold the Wrench on the One Side when you tighten the Bolt at the top.
You will also need a screw lock and a T55 Torque that can be removed.
Apply a small amount to the tightening bolt at the bottom and tighten, as the vibration may loosen the bolt.
I installed it by myself, but it was Large strange not to put Wound on Engine etc.
View detail
Fits: BMW R1200GSLC, BMW R1250GS, BMW R1200GS LC Liquid Cooling, BMW R1250GS
Robust product.
Installation on the R12000GS 2018:.
It takes about 2 hours to install by following the manual. The point to note is that you should not tighten some screws until all screws are temporarily fixed as described in the manual.
Protection.
I have the Engine Guard so it may be less likely to damage the tank but I have it on for insurance purposes.
By the way, there is the after that protected me when I fell on the Right Side.
Color:.
I chose Black, but Silveretc. might be better for the scratch.
View detail