Reviews
Fits: KAWASAKI ZX6-R, KAWASAKI ZX10-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R, KAWASAKI ZX6-R
It's a perfect MATCH.
It is easy to install without interfering with decals and pads. I will not know the effect until the time comes, but I am satisfied with the appearance of the product. View detail
The strength seems to be sufficient.
Tanks and Engines do not seem to be damaged when they are knocked down.
Just Quantity:Pair (for Left and Right) The output of the Quantity:Pair (for Left and Right) I was slightly concerned that it was not symmetrical.
View detail
I like the vertical line.
The engine and vertical line of GB350 are integrated and fit together beautifully. I was worried about the plate part due to its structure, but the actual product is thicker and that solved the problem. View detail
Installation of Engine Guard for YAMAHA Tracer 9GT
I think the YAMAHA Tracer 9GT has a low center of gravity, but I'm 170cm and can stand on both toes.
Even stopping at traffic lights is a daunting experience.
I was hoping to fit it for the purpose of protecting an elderly Rider's legs in the event of a fall.
I decided to buy it immediately because it was on sale at a low price by Webike.
Our concern was the difficulty of the installation process.
The EngineBody may slip down when the EngineBolt is removed.
I read in the Instruction Manual that it was better to support it with a Jack.
I don't have any Jack's with me, so it's like a wood sleeper.
We inserted it under the Engine oil pan and started working on it.
Not to worry, if you take the Bolt on and off one by one, it will not slip off and is Large sturdy.
Torque is applied very strongly and it is hard to loosen Bolt, so it is better to devise a Wrench Lever.
As a precaution, check the length of the Bolt in the Instruction Manual to ensure that it is installed correctly.
I, an elderly Rider who is not an expert in Motorcycle maintenance work, but relatively knowledgeable.
View detail
If anything, it's for looks.
For Guard, it's more like a Classic.
I wear it as a stylish point of view.
I am satisfied with the Large change in that respect, but it is still made.
It is solid and heavy in its own way.
I think there are pros and cons there.
I fell over once, but in the end it all depends on the situation.
Bar end mirrors are available.
There is nothing we can do about it and we have scratches on the Tank.
BoltQuantity on the Under Guard side for some reason.:2pcs.
I cut off the whole Plate because it didn't fit in any way.
Uses.
Not a good match with Performance damper
No, but the installation itself is possible.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA, SUZUKI GSX-S1000GT
It's a reasonable price, so one more step.
I have no problem with the appearance, etc., since the price is reasonable, but I would like the Bolt to be an anti-theft Bolt or a Plating Bolt. View detail
Fits: HONDA CL250, HONDA CL500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250, HONDA Rebel500
strong bumper
My motorcycle is HONDA REBEL500. Although this car is relatively low, it will cause a lot of damage in case of reversing, so I bought this DAYTONA engine bumper from webike. This sturdy engine bumper has a diameter of Φ25. 4. Made of steel pipe, it can be installed directly without damage, and can be installed with various accessories of the handlebar with the same diameter as the handlebar. -------------------------------------------------- -------- My motorcycle is HONDA Rebel500. Although this car is relatively low, the loss of reversing is also very large, so I bought this Daytona engine bolt at Webike. This sturdy engine bolt was φ25. 4 Made in steel pipes, directly install without loss, and the same diameter of the handle can be installed with various accessories. Powered by Google Translator View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 650XT, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650
SEA BASSOEM Attachment Bar
For attachment installation and protection of standing chutes from damage.
Purchased using webikePoint after delivery. The order arrived quickly.
It was well made, well shaped, and unexpectedly lightweight.
Installation is no problem with a translated Instruction Manual, which can be found by clicking here. You will also need a torque wrench and screw lock.
View detail
Mounting Large is weird!
I installed it on a HORNET250, and the hole position etc. was Large sturdy, but I had to omit it because the Bolt length was not long enough to put the collar for the Penetrating Bolt at the bottom! I managed to attach the bolt and it was OK, but I had to use a jack to fine tune the height from under the Engine. I don't want to install it again, but once it is attached, it is a good parenthesis and it looks like it will protect the engine. View detail
Fits: HONDA CRF1100L Africa Twin, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES
The original bumper works great
My motorcycle is Honda CRF1100L. Since the original bumper is not standard and needs to be purchased separately, I bought this original bumper on webike. This original bumper is made of stainless steel tube and electropolished , corrosion resistance, easy to clean dirt, installation does not require additional fixing, all are reserved by the original factory, very simple. -------------------------------------------------- -------- My motorcycle is HONDA CRF1100L. Since the original barrier is not standard, I need to buy it separately, so I bought this original barrier on the webike. , Corrosion -resistant, easy to clean dirt, and do not require additional fixation, all are the original positions reserved, which is very simple. Powered by Google Translator View detail
It has tightened up.
Select is Style-oriented, as it is rarely driven on forest roads.
The product is highly satisfactory in terms of design, quality, and paint job. As expected from DirtFreak.
The Style is one size thicker than OEM, and the semi-gloss coating tightens up the Style.
I would have liked it to be thicker, but I am generally satisfied.
The interference with the YOSHIMURA Exhaust System, which we were worried about, was no problem at all, and the Clearance fit with plenty of room to spare.
I'm glad I bought it
View detail
Somehow better than expected.
I thought it would be a little difficult to fit the Bolt on the Right Side, but it turned out to be acceptable because I was able to make the lower bolt fit 10mm longer than the upper bolt by force. The under guard was no problem if I changed to a longer bolt on the One Side. (I removed the paint from the Tap part in advance.) The oil replacement is in the way, but there is a gap in height, so a tool may be able to fit in there. I have not tested the strength reinforcement, which was the main purpose of this project, so I'll see how it goes.
Supplemental YOSHIMURA's muffler (Down) was interference OK (Clearance about 2mm)
View detail
Match with Motorcycle
It is also MATCH on Motorcycle, so it is not very noticeable. crf250rally has a high center of gravity, so it would be suitable for preventing scratches from storm-related falls when the Motorcycle Cover is on. View detail
protect my car
My motorcycle is a HONDA X-ADV750. The bumper I bought elsewhere is very rough, the hole spacing is not correct, it is not good-looking at all, and it is also very heavy. I re-purchased this HONDA original side bumper on webike. The accessories are still the original ones. The installation fits perfectly and the shape is also handsome. Webikie shipped very quickly, the packaging is in good condition, and will repurchase. -------------------------------------------------- -------- My motorcycle is HONDA X-ADV750. The barrier bought in other places was rough, the installation hole distance was not right, it was not good at all, and it was very heavy. I re -purchased this Honda original side bolt on the webike. The accessories are still good. The installation is strictly seamless and the shape is also handsome. Webikie is delivered quickly, the packaging is intact, and it will repurchase. Powered by Google Translator View detail
It is not conspicuous, but if it is there, it is safe for standing moss.
[How is it used?
Purchased to prevent damage to the Engine and Brake pedal when standing up.
Was the one you received as per Image?
It was more solidly built than I expected.
Was the installation difficult?
I didn't want to pull out the Bolt that connects the Engine to the Frame and have the Engine Gap, so I had it attached at the Shop.
How was your experience with it?
It's a similar shade to Frame, so it's not too noticeable.
[Included Parts:were they on?
There was
[Was there anything that disappointed you?
No
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
As a precaution, it may be possible to guard the exhaust system and the grip end if the vehicle falls over while running, so those who do not like that should buy a different product or attach a product that can guard the system further. (If it falls over the photo 5 or more of the product introduction, the rest, I think, can not be Guard.)
View detail
Design is great! How practical is it?
The quality of DirtFreak's products is unmistakable. The paint and design are both excellent. I don't want to drive on forest roads, so I don't want to have any crashing performance.
Clearance with YOSHIMURA Exhaust System, which we were worried about, was sufficient and there was no interference at all.
Installation was done with a simple push-in. The hole position was perfect.
It is almost a Fashion-like Custom, but I am personally satisfied with the way the body of the car looks tighter. It is just as I expected.
View detail
Fits: HONDA CB1300SUPER FOUR SP, HONDA CB1300SF, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SB
Pipe before you fall
'23 I installed it on a CB1300SB SP.
The Single Item shows that it is just a pipe bent and a plate welded to it for mounting, and although it has only two fixing points on the One Side, it seems to be solid.
When installed, the Front side is co-tightened to the Engine MountPoint, and the Rear side is secured to the Frame via a bush, which feels solid.
Although the frame is very compact, it is likely to receive force from the frame in the direction of input that would be applied in a fall from a standstill to a low-speed fall, such as a standing fall, so even with only two fixed points, there is no sense of insecurity.
I felt that the Compact design and the Matte Black color would have a small negative impact on the original design.
I also think it could be used as a mounting point for the trendy ActionCam and other applications.
It would be desirable to end up with a falling-back plan, but I felt that it would minimize the damage if something were to happen.
View detail
Engine Defense
I bought them because I had encountered several dangerous situations when I chipped my head on forest roads.
I thought it was tough in the picture, but when I put it on, I was satisfied with the compactness of the product.
The drainage holes are also well made.
View detail
Better than I expected
Purchased for Motorcycle practice, made in India
I wasn't expecting it, but it's not as noticeable as I thought it would be, and it's nice and small.
Effectiveness in case of tipping over will be adequate, but at this price it is sufficient.
It's insurance, only.
View detail
Looks sturdy.
Seems sturdy but feels heavy.
There will be a little hang in the installation.
When removing the screws from the lower part of the Neck, the range of turning is narrower with Spanner.
You will have to do steady Screw tightening.
It must be due to the shape.
When running with the Shield on, the aerodynamic drag seems to be Large.
Top speed drops.
In winter, it provides good wind protection.
View detail