Reviews
Design is great! How practical is it?
The quality of DirtFreak's products is unmistakable. The paint and design are both excellent. I don't want to drive on forest roads, so I don't want to have any crashing performance.
Clearance with YOSHIMURA Exhaust System, which we were worried about, was sufficient and there was no interference at all.
Installation was done with a simple push-in. The hole position was perfect.
It is almost a Fashion-like Custom, but I am personally satisfied with the way the body of the car looks tighter. It is just as I expected.
View detail
Engine Defense
I bought them because I had encountered several dangerous situations when I chipped my head on forest roads.
I thought it was tough in the picture, but when I put it on, I was satisfied with the compactness of the product.
The drainage holes are also well made.
View detail
Excellent Quality, Fit and Finish, Great Low Profile Look!
Excellent Quality, Fit and Finish, Great Low Profile Look! Also very quick and easy install for anyone with basic mechanical tool familiarity. A must have! View detail
From Slider
I was torn between Slider and Guard, but I am glad I went with Guard. I put it on my Gixxer 250 and the size feel was good. View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor
It is surely better to install it in both new and used cars.
If you own a motorcycle, sooner or later you will probably fall over your car. Even if you are a NORMAL motorcyclist, I think you should install this Engine Guard in case of a fall.
Footpegs, crankcases, mirrors, tanks, handlebar weights, side cowls... the list goes on and on.
However, the Crankcase and Engine have a dramatically higher chance of being undamaged if tipped over (depending on how it tipped over, speed, etc.), so repair costs can be reduced, the design and large size are not obtrusive, and if the color Black is selected, Touch The design and large size are not too obtrusive, and if you choose the black color, it is easy to touch and panRepair.
If you put scratches on the crankcase, it will be difficult to match the color of the NC42 because it will probably be Silver or a darker Gun meta color. The paint will also be exposed to heat, so Touch panLevel paint is not expected to adhere well to the paint.
From the above reasons, if you are a CB400 owner, you should definitely install this product. By the way, it is not so easy to install by yourself, so please leave the installation to Motorcycle shop.
View detail
Perfect Engine Guard
Perfect quality of finish Easy enough to install once disassembling old parts on bike Would recommend to anyone with a hornet250 View detail
Good vibes!
Was the one you received as per Image?
It was almost exactly as shown in the Image.
Was the installation difficult?
I looked at You Tube and it looked difficult, so I asked Shop to help me.
How was your experience with it?
It is close to the Shift lever, so it sometimes gets stuck, but it doesn't really bother me.
[Included Parts:were they on?
Yes.
[Was there anything that disappointed you?
Not particularly
Point and hang of installation
I was watching the installation, but when the shaft was removed, the engine gapped from the frame and I had a hard time getting the guide through the shaft.
View detail
Fits: KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja ZX-6R 40th, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Reliable OEM
[How is it used?
Installed as an Option when the ZX6R was delivered.
Was the installation difficult?
I don't know in terms of difficulty since the car was delivered with it installed, but I believe that proper Torque management must be done with the Cowl removed.
If you are familiar with the process, it is not that difficult, but if you do not have a service manual or Torque wrench, it is better to leave it to the store honestly.
How was your experience with it?
I had it on when I used to drive an EF model.
I put it on again because the Engine and Frame were completely unscathed when I fell on the Circuit.
I think ManufacturerOEMOption is made with more fall tests and development time than Other Brand Product, so there is no need to choose Other Brand Product if OEMOption exists. If OEMOption exists, there is no need to choose Other Brand Product.
Although it is not a very stylish design, it has a number of defenses and the price is not that expensive, so we would like to recommend it.
[Was there anything that disappointed you?
Some people may not like it because of its rugged Block-like design.
[ITEMS TO BUY TOGETHER
If you want to protect Cowl and Tank as well, it is better to use Frame Slider or Tank protector separately. Since this is only an Engine Guard, it cannot protect Cowl and Tank.
View detail
It is easy to install.！
I installed it on my MOTO GUZZIV7?STORNERO, it is Exactly designed as the Motorcycle is a SCRAMBLERType. Installation was easy and took less than 10 minutes. View detail
Fits: HONDA CL250, HONDA CL500, HONDA Rebel250, HONDA Rebel250, HONDA Rebel250, HONDA Rebel500
Simple but sturdy and stylish
SP Tadao's inner type exhaust pipes are much thicker than the standard ones, and because they protrude forward, all low type engine guards interfere with them. So we were looking for something that would not interfere.
When DAYTONA was participating in the "DAYTONA" event, I consulted with them and they showed me the one on their Demonstration car, and I thought this one would be Large and durable, so I purchased it. I was satisfied with the Matte Black paint and the design that fits the SEdition.
The installation was easy, and the precision of the auxiliary rubber to prevent scratches on the pipe was high. I was impressed that the actual installation took less than 30 minutes if you have the right tools. Even if you can't install it by yourself, the labor fee at a motorcycle shop will probably be cheaper.
Unlike the Low type, it is not the first thing to hit the ground when you run off the road, so it is better to think of it as something to guard the engine. If you are worried about the effect on the exhaust system when you run off the ground, we recommend you to use it together with the Exhaust System Guide.
A Camera can also be attached to the Pipe for those who want to shoot at low Angle.
View detail
Fits: HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC700X, HONDA NC750X TypeLD, HONDA NC750X
Sturdy and surprisingly inconspicuous
Looks surprisingly unobtrusive and Parenthesis is good. View detail
About DAYTONAE Engine Guard
I was torn between products from various manufacturers for the Engine Guard, but DAYTONA's Engine Guard was just the right size, not too large and not too small. 。 A couple of days after installation, I had a bump when I stopped and fell over, but thanks to the Engine Guard, the Handlebar, Clutch lever, Mirror, etc. were not damaged and the Large change was saved!
The rigidity is probably quite good.
View detail
Saved my CASES!
The engine guards did as expected! They saved my cases when going on a trip and a couple slow speed falls...(turning a sport tourer into a duel sport). They were easy to install once I studied the instructions (purely in Japanese, I think); just be sure to pay attention to the pictures. Although, it would be nice if the instructions were in different langauges. View detail
HONDA Front Side Pipe Product # 08P71MKWD00 NC750X 2021 21 RH09-1000001
Preferred the OEM Crash bar. The installation guide comes with the production. Need to download from the URL provided. Others may prefer 3rd party Crash bar which can cover the Engine and Radiator View detail
I feel protected.
The texture is good, and the E/G area is well protected. I had a problem with the plug hole in the pipe, but it's nothing to be concerned about.
Installation is not difficult as long as the through bolt in the Center Stand section is inserted.
View detail
beautiful & practical engine guard
Installed the Active engine guards on 2019 honda cb1100RS. the fit and finish is perfect and the engine guard is very high quality. highly recommended! View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Standstill protection-Engine Guard
[How is it used?
RnineT is for a low center of gravity, so I knew it would be hard to stand and jostle, but I installed it just in case.
It's been six months since the car was delivered and we haven't had to take care of it yet. (⌒∇⌒)
Was the one you received as per Image?
We had the standard item from Dealer installed as is.
I was worried about the one from rizoma, but this one seemed to be more firmly guarded around the head.
I had this installed because I had the actual product.
I was not particularly concerned about Engine Guard.
Was the installation difficult?
I asked the Dealer at the time of delivery, so the degree of difficulty is unknown.
Probably, it should be Bolt On because it is a vehicle-specific product.
How was your experience with it?
Luckily, we have not been taken care of yet.
But this bar has more to offer than just serving as an Engine Guard.
I've seen people use it as a Mount for Fog light and ActionCamera.
There may be times when you use it that way….
[Included Parts:were they on?
I don't think there was any problem.
The optional Wonderlic ProtectionPad for Engine Guard/Tank Guard (item no. W35833-002) can be installed.
[Was there anything that disappointed you?
This does not mean that they are disappointing, but they do look a little stiffer.
That is cool, so I guess it is a preference.
I am planning to install an Under Cowl in the future, and I am wondering if I should remove the Engine Guard at that time, or keep the Engine Guard installed and install the Under Cowl. (I heard there is such an Under Cowl. I'm searching for more information now.)
View detail
สวยน้ำหนักเบาราคาไม่แพงแก้จุดบอดถ่ายรูปข้างซ้ายไม่ขึ้นได้เลย View detail
More fearless.
The actual product looks better than the picture.
Wind entrainment into the legs was reduced.
View detail
It was on the car body I bought from the beginning.
The end of the handlebar and the tandem footpeg were scratched by standing moss, but I think the damage would have been much greater without it. View detail