Reviews
Can also be installed on SUPER CUB110 JA59
Installed on SUPER CUB110 JA59.
The work itself can be easily installed with no problem at all, but it is too long for the SUPER CUB and the body will stand up a little.
View detail
It's awesome!!!
Not only does the front-to-back position change, but the side stand is positioned a little further to the left, making the support much stronger. However, the downside is that the support is unstable with the original side stand, so you have to shorten the original side stand or install an adjustable side stand like I did. If you adjust it well, you can park stably on any road that slopes to the left or right. In fact, it would be enough to give it 5 stars, but since I am not satisfied with the combination with the original stand, I give it 4 points. -------------------------------------------------- -------- Instead of simply changing the front and rear positions, the side stand is placed a little more, and the support is very strong. However, the disadvantage is that the pure side stand is anxious. If you adjust it well, you can park it stably anywhere on the side of the road. In fact, it is enough to give five stars, but the combination with the genuine stand is not satisfactory. Powered by Google Translator View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Stable even with heavy Rear
It is difficult to remove the Bolt and Nut of the OEMSide Stand, but the Bracket itself is easy to install.
The feel after installation is good. The STAND is located at the rear, but it is not difficult to apply.
The stability of the vehicle body with the Side Stand out is unmatched by the OEM.
View detail
It's harder to sink into the ground.
Purchased to make it look more rugged.
It doesn't seem to be a CT125-specific product.
Mounting Bracket slightly interferes with Side Stand
I think that thin rubber plate etc. between the two will not scratch both sides.
The larger area of STAND
It's harder to sink into the ground, so I'm less careful when parking my bike.
View detail
![[Option Parts]ReplacementTip](https://img.webike-cdn.net/catalogue/images/55193/ze56_8929_TS.jpg)
80mm for MOTARD in WR
I put it on my WR250R MOTARD, but the height of the STANDIncluded Tip is too low and the motorcycle falls over a lot. It would have been better if the height of the tip could be selected in STANDIncluded Parts:. View detail
Forged aluminum is very high strength
It's just STAND, so the only change is that it makes me feel a little better. I put it on my WR250R MOTARD, but the attached tip is too low, so I bought a 55mm tip from Option Parts and use it. I bought a 55mm tip from Option Parts because I didn't want the motorcycle to fall down too much. It would have been better if I could choose the tip height. View detail
Fits: SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100, SUZUKI Address V100
Very convenient
The side stand is essential for scooters, and if the installation is done according to the instruction manual, it is not particularly difficult and anyone can install it.
It has become extremely convenient!
View detail
A little too short?
Since the Lowdown Kit was installed at the same time as the car was delivered, the car body was standing up, so we had to be careful where we parked the car and sometimes could not pay the side stand depending on the road surface conditions. After the replacement, it leans quite a bit and I have a sense of security, but if it were 10mm longer, it would lean too much. View detail
Round and round and round and round … I was in danger of dropping out.
The ReplacementTip (the part that lands on the ground) came loose right away, even though I tightened it! 。 A friend of mine installed it on his new CRF250L vehicle, but it was loose.
I stopped using Bolt of Included Parts:, changed to slightly longer Bolt, inserted Flat Washer→Spring washer→Flat Washer, and tightened it with Bolt, and it did not loosen.
View detail
Nagano and Gifu prefectures have quite a few unpaved parking lots.
I could not tell the large size from the product photo, but when I saw it in person, it was a large enough size to be used for practical purposes. As you can see in the picture, it is almost the same size as the iPhoneSE. It would be better if the material was rubber. View detail
STAND adjustment to match vehicle height
[How is it used?
When we installed the HighLink Plate, the car body tilted too much when stopping, so we purchased this product with an adjustment mechanism.
Was the one you received as per Image?
At the time of purchase This price is high for one STAND." But when I saw the product I received, I thought Well, I guess it's just too expensive." I've settled on the impression that the product is just like Image, though I still think it's expensive.
Was the installation difficult?
It seems to be screwed off at the lower 1/3 of the STAND and can be replaced with an attachment of a different length.
At first, I did not understand the system and thought that the length of the STAND was adjusted by loosening or tightening the screw.
How was your experience with it?
I wonder if it works well with the products made by DRC (both Large books are DirtFreak). The car body, which was too lean and uneasy in the Normal stand, is now as lean as in the Normal stand, and I feel more secure.
And STAND itself. "Forged" The product was not a product of the "I am a good person," but a high-quality looking product that was satisfactory enough.
[Included Parts:were they on?
This is the only product.
[Was there anything that disappointed you?
The functions and appearance of the product are sufficient, but it would be appreciated if the appearance and Material could be changed to a less expensive Material at a more affordable price (I can't repurchase the product if it is released after purchase...).
Other items that would be helpful
Point and hang of installation
Read the Instruction Manual properly and understand how to attach it before attempting to do so.
[Availability and clarity of the Instruction Manual
The Instruction Manual is included in the package and is easy to understand and illustrated.
To avoid being like me, read the Instruction Manual thoroughly before proceeding with the installation.
[Notes]
If you install it on a vehicle that has not been converted to high lift, of course the vehicle body will stand up too much and it will be unstable when stopping (although ShortAttachment will solve this problem). STAND for high lift measures." and should be used with the understanding that
The overall length of the NORMAL ratio is about 25mm longer. Conversely, the Short Type, which is 25mm shorter in overall length, is also available, so be careful not to make a mistake when purchasing.
[ITEMS TO BUY TOGETHER
Install STAND Spring Spring hook." If you can afford it, it may be a good idea to purchase the products at the same time.
[Opinions and requests to Manufacturer
As I mentioned above, please use inexpensive materials and reasonable pricing while keeping the same functionality.
View detail
I wonder if the Spec. has been changed.
I was interested in this product, but I saw many impressions that it had a " mysterious protrusion " and could not be stored completely, so I hesitated to purchase it. It is true that the protrusion has been removed and it can be stored properly. (The vehicle in which it was installed is a 23-year MODEL JA60) However, I think it can be attached to the previous MODEL as well. View detail
Fits: HONDA PCX, HONDA PCX160, HONDA MSX GROM, HONDA MSX125SF, HONDA MSX125, HONDA GROM, HONDA DAX125, HONDA MONKEY125, HONDA ADV160, HONDA CT125
Since Lowdown.
When I assembled the NMC Lowdown Kit, the OEMSTAND was almost upright, so I replaced it with the SPTakegawa Adjustable side stand.
The main reason for choosing this product is that it is compatible with OEM stand switch.
The replacement process itself is easy, and it is a good idea to have a special tool for removing the Spring.
The length of the side stand is adjustable, and the kick-up portion is larger than OEM, so I am satisfied with the ease of holding the stand in place.
View detail
![[Option Parts]ReplacementTip](https://img.webike-cdn.net/catalogue/images/55193/ze56_8939_TS.jpg)
Exactly for klx250 OEM ride height
[How is it used?
I purchased this product because I need this product to install the following forged AluminumKick Stand on my OEM ride height KLX250.
https://www.webike.net/sd/23952653/
Was the installation difficult?
Simply remove and install the Bolt1 pc.
Note that the Socket will not fit in the hole unless the outer diameter of the Socket is small.
How was your experience with it?
It worked fine
View detail
OEM is getting bald and bald and needs to be replaced.
[How is it used?
Installed on KLX250 OEM ride height.
The tips are too short to install at OEM ride height, so we replaced them with ↓'s 105mm Option tips.
https://www.webike.net/sd/23908023/
Was the installation difficult?
Easy installation using only common tools.
Remove the Side Stand, so if you have a Maintenance Stand or a Motorcycle stand, use the Large sturdy stand.
How was your experience with it?
Refreshing because the OEM was bald and bald.
I feel good about it because I think it has reduced the weight somewhat.
View detail
Installed on JA10CROSS CUB
I was told that it was not compatible with JA10CROSS CUB, but I was able to install it successfully.
We have slightly modified the STAND, but there are no problems.
View detail
Fits: HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard
Total length 190-200
Excellent appearance and rustproofing performance.
I am using it on the APE100 at the same time as a Side Stand Bracket from another company, but it is too short and may cause the vehicle body to lean too much.
View detail
Fits: HONDA PCX125, HONDA PCX125Hybrid, HONDA PCX150, HONDA LEAD125, HONDA ADV150, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA CT125CT110 HUNTER CUB
Title is not specific.
Well, if you directly connect to the Internet, you don't need it, but it is quite narrow to get in, so if you think of it as a convenient item, it is cheap and inexpensive! View detail
Fits: SUZUKI DL650 V-Strom, SUZUKI V-Strom650, SUZUKI V-Strom650 L2, SUZUKI V-Strom650 XT, SUZUKI V-Strom650XT
Side Stand End
[How is it used?
Used at every stop
Was the one you received as per Image?
It fits and feels just as I expected.
How was your experience with it?
No problem at all, I don't have to use another Plate anymore, which is great!
[Points to note]
None
How did it compare to other products?
There is no comparison. This was the only product available for the specific model of the car.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I would prefer 15mm instead of 25mm. Let's do something about it.
Side Stand problem of CRFRALLY50. The side stand is so strong that it seems to topple over at a slight incline or in the wind, and many owners dream of a short stand. So, they bought ZETA's Short Stand, which is actually too short because it is 25mm shorter. So, I decided to buy a ZETA Short Stand. Set color SC1510S The material is stainless steel, so there is no problem with the color and etc. even if it is combined with ZETASTAND. The STAND itself is locked in length with an 8mm di− socket and screw lock. If you have a tool called "Spring hook", you can install the spring by pulling the spring by force without any difficulty. If you fail and the spring hits your body (face, eye, etc.), you may get a little injured. If you are going to do motorcycle maintenance, as with anything else, I recommend that you get a dedicated tool. is very satisfactory, including the appearance. However, the price is...(^ω^)........ View detail