Reviews
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
A lowered bike needs this stand.
This stand is better than the aftermarket stand I purchased after lowering my bike. This stand was compatible with the switch that turns off the engine when I deploy the stand. The lean angle gives me comfort that the bike will not fall over in either direction. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Custom Side Stand Shaving
[How is it used?
The Side Stand is highly customizable and must be used.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Side Stand of shaving. cool.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Seriously perfect! !
The color is also similar to the genuine one, so I'm really satisfied. However, the one dissatisfaction part is that the torque value is high, so it will be difficult to do without power. ------------------------------------------------------------ -------- The colors are similar to pure, so I am really satisfied. However, one dissatisfaction is that the torque is high and it will be hard to do without power. Powered by Google Translator View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
When RIA was formed into 17 inch, since the inclination at the time of a stop became large, the goods here were purchased in pure side stands. If a higher vehicle is not intentionally raised only by forming 17 inch, 25-mm long will think that it is un
When RIA was formed into 17 inch, since the inclination at the time of a stop became large, the goods here were purchased in pure side stands.
If a higher vehicle is not intentionally raised only by forming 17 inch, 25-mm long will think that it is unnecessary and it is a thing as which about 15 mm may be sufficient.
In case of this product of 25-mm long, a motorcycle stands too much for a while, and he has a feeling.
The point in which positioning at the time of paying a stand is possible can be evaluated.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Adjustable Side Stand
PMC (Performance Motorcycle Creat) realized a superb adjustable side stand chromed all in aluminum the workmanship is really of quality, perfect on a kawasaki 750 cm3 from 1993. PMC (Performance Motorcycle Creat) realized a superb adjustable side stand chromed all in aluminum the invoice is really of quality, perfect on a kawasaki 750 cm3 of 1993. View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR)
standing too long
The material is made of cast iron, but I didn't want it to fall again, so I took it off immediately. View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Looks and practicality
I installed it for the countermeasure of the ride height that had changed by the lay-down and the change around the front.
https://youtu.be/7NdjIG-_XnQ
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Cost conscious. That's PMC!
When 2cmLowdownRear suspension link was put in Z900RS, it was the case that there was no problem at all even with Side Stand of NORMAL especially, but the Caster of Front was made to stand. (Front fork protrusion amount is 25mm out from NORMAL) Of course, I thought about the reliability and cost performance. It was easy to remove the bolt, nut, and collar after removing the spring with the STAND raised. It was easy to replace the bolt, nut and collar. Today, I changed the mounting bolt to 64Titanium, and I used NORMAL because Nut is a special Nut with a thin stopper.
I think PMC can make TitaniumParts that we can afford.
Please do your best. I'm rooting for you.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR)
The roughness of the castings matches the old car
It's in use on the KZ1000J
The OEM STAND was tired, or maybe the body of the car was a bit sleepy I replaced it with Reproduct
My posture when I stopped was crisp
Even though the paint is new, the roughness of the castings gives it a very nice, period feel
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Is it consumable?
The quality of the product is good.This is my second purchase after the Stopper boss came off. 7 years I have converted to 17Inch wheel The leaning of the body is also the best View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Spec of car body. I appreciate being able to adjust according to!
Although it used it from before, it is intense due to aged deterioration, and it was replaced with a new one.
As long as you are using it for a long time, the pinched portion to the car body gradually spreads (See photo).
The STAND adjustment part also distorted slightly in Color.
Lengths of ± 20 mm each have a Spec. It is appreciated because the adjustment is effective for the change, but it is saved personally if the adjustment range is a little wider.
I made clogs on processing.
Quantity : To use with 2pc eyes is a satisfactory product overall.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR)
Product that does not impair the atmosphere of the car model and has superior performance.
Due to aged deterioration, the wrap has become big, from Side Stand, this product has been replaced. The too large inclination has been eliminated and the safety of the stopped Motorcycle has been secured. Large I'm strange. View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
To be sorry
I purchased it because it can adjust the height.
When attaching it, the ground plane shifts and only the corner is grounded to the ground.
I bent after I fixed it so that it would not move to carry Motorcycle.
It is still weak compared with OEM.
When carrying, I think that it is better to use another STAND.
View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
This is buying!
Purchase because the car body tilts when you raise the car height.
There was no Z1-R in the car model, but Frame is Z1
Possibly consider NORMAL to be something and think that it is not NORMAL and you can buy it.
As a result, it was able to install normally.
It is possible to make delicate adjustment, it is beautiful with Stainless and this is good.
Well I hope it will be a bit cheaper.
View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
PMC Adjustable side stand
The movable part of OEM's Side Stand worn out. It's pretty pretty so I bought it.
Easy to install and adjust the length of the STAND is also easy. However, I fixed it with Screw lock because it will become loose during driving.
I am satisfied that it looks cool as well.
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
I needed strength unexpectedly
900 NINJA to 17 in. It became necessary as I changed it. I needed a lot of strength to install Spring. It is only there that suffered
In my case (GALE SPEEDRear 4. 50 Inch wheel, Eccentric reverse attachment, TireMichelin PP2CT, car height adjustment is not assembled) 20mm Long was just right. It is slightly upright. When stopping, it is scary unless you leave Handlebar to Left firmly.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Texture is good.
Making and texture are good, but there was more weight than I thought.
I think that the amount of gold is also high, but I think that it is optimal for vehicles that raised the car.
View detail
Fits: KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 (air-cooled)
Side stand does not fit 1993 Zephyr . Does not fit 1977 KZ 1000 . The fork part must be machined out to accept the larger(thicker) mounting tab on the bike. The gap in the forked part is to narrow. You can make the tab on the bike smaller by grinding
Side stand does not fit 1993 Zephyr . Does not fit 1977 KZ 1000 . The fork part must be machined out to accept the larger(thicker) mounting tab on the bike. The gap in the forked part is to narrow. You can make the tab on the bike smaller by grinding it. Nice side stand , poor fit. View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Tilt over of OEMSTAND
OEMSTAND over-inclination problem
"Co" Although it was awkward, such as correction of character part, it resolved
Compared to OEM, I think that it is difficult to put a foot when issuing a STAND but I think that it will be fine if you get used to it
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Since angle adjustment is possible although it is used for a ZEPHYR1100, it is very convenient. Since their own vehicles were raising vehicle height, when they were pure Side standses, the car body inclined too much and they were strange. Since adjustme
Since angle adjustment is possible although it is used for a ZEPHYR1100, it is very convenient. Since their own vehicles were raising vehicle height, when they were pure Side standses, the car body inclined too much and they were strange. Since adjustment of this Side stands is possible, it is convenient that every vehicle height can respond. I thought that it was regrettable that a color has only this color and there should just be black if it says by force. View detail