Reviews
It is what it is
[How is it used?
Fitted due to risk of falling due to paralysis of the left hemisphere
Was the one you received as per Image?
As per Image
Was the installation difficult?
Anyone with tools can do it,
How was your experience with it?
I don't know because I haven't fallen over, but it is designed to absorb shock in two stages so that the impact is not heard by the Frame.
[Included Parts:were they on?
Sticker is attached.
[Was there anything that disappointed you?
In the event of a fall, the SliderBody is likely to collide with the Silicon rubber before the shock-absorbing Silicon rubber.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
If I had to choose one based on cosmetics, this would be it.
It is a Brand product (lol) and well made, but at an affordable price. I am very happy.
If you don't mind the round shape, I recommend this product. Side stands of today are cheaply made and have little ground contact surface, so it is a good product to have.
View detail
It is attached to Slider from the beginning and looks as if it is there.
It is a foreign product, but unlike Japan's culture
Manufacturer itself is not caring.
Pooch has a per ha Gap product.
This is the culture of Europe as it is.
JAPAN's Slider is definitely better.
View detail
Texture is not good for the price.
I bought this product because it is a pooch, but the ATEC
We were out of stock and had no choice but to go with this product.
The installation is Exclusive Design but it does not look good.
View detail
I'm disappointed.
It was Pooch's Brand, and ATEC was sold out.
I had no choice but to choose Puch. The product was crappy for the price.
I am sorry to hear that.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 TRACER, YAMAHA MT-09 TRACER GT
Side Stand For prevention of sinking
The parking lot where we stopped for touring was gravel, and although the MT-09 with only the Side Stand did not fall over, it was quite unstable because the Side Stand was stuck in the gravel, so we installed it as a safety device.
I would have preferred to have it in black, but the upper plate is stainless steel, so I wondered if that would be cost-effective. I was looking at the instruction manual and found that the Illustration of the Parts was wrong as in the case of SIDEWing….
If you have seen the instruction manual, you should not read it carefully, because it will confuse you.
However, I think it is still a little expensive, perhaps because of the weak yen, so if you are likely to encounter gravel parking lots or scorching hot asphalt on your touring, you may want to consider the risk of not being able to drive due to damage to the clutch lever in case it falls over, and the cost of replacing the lever. Considering the cost of replacing the lever, I think it is a good idea to install the clutch lever as a precautionary measure.
*
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA XSR900
You can hide Frame's somewhat worrisome Point.
The back side of the product was not included in the product photo, so I am attaching it.
I would have liked it even better if it had been truer without the lettering, but it is slightly raised.
The installation is done by turning the hexagon in the middle, and the diagonally cut Pipe at the end of the hexagon expands to fix it.
It may be better to retighten it occasionally.
View detail
It can be used in Normal stand even though it is PRO ARM.
I originally had a STAND that was not for PRO ARM, but since I could not use it on my CB1000R, it was left in the yard. View detail
Fits: INDIAN MOTORCYCLE FTR 1200, INDIAN MOTORCYCLE FTR 1200S
Slider for IndianFTR
SliderBody is quite Large.
If it is this large, it may be effective in case of tipping over, but it doesn't look good. The bolt on the body is 18mm, and the normal wrench is 19mm after 17mm, so be careful. The included bolt is 10mm deep, so you need a longer hexagonal wrench. I think the price is too expensive...
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000GT, SUZUKI GSX-S950
gsxs1000gt PuigFrame Slider
Can be installed without problems.
It is better to have Torque because it touches the Bolt that is mounted on the Engine.
When gutted, the Blinker will break.
View detail
Safe parking for Camping area and hot Asphalt.
I was concerned about the small side stand with a small ground surface, so I purchased this product, which is compatible with the TORACER.
The design is good and anyone with a Hexagonal Wrench can put it on.
When I temporarily aligned the upper plate, it floated a little, so I was a little concerned, but after tightening the bolt, I was able to attach it without any problem. Just to be sure, I tightened the bolt after applying screw lock agent.
It is safe even if you forget the STANDPad during camping touring, and it eliminates the fear of tipping over when parking on the hot Asphalt in the summer.
I guess it is a little expensive for a car model-specific product of Puch, but I gave it 3 stars for cosmetics.
View detail
Overall, I am satisfied.
It was installed on SVP401 2021 MODEL.
No other Manufacturer had anything we liked that was compatible with 2021MODEL, and Puig was the closest to Image.
As you can see in the image, the overhang is strong, but due to Motorcycle's unique form, I think it can't be helped if it is well protected.
Material has a good texture and does not feel cheap. Installation is basically Level, which anyone can do.
The fixed Bolt has two supports, but when a strong force is applied, it may be because it can release the force by bending more than three supports.
I am assuming on my own that this is the case.
I'm not a fan of Motorcycle with glaring Anodized etc., so it is not fashionable or good looking, but I like it that way too.
Perhaps because of these times, it took a long time from order placement to arrival, but we managed to wait without rolling over.
Only the purchaser can tell, but I was surprised when I opened the package, as the product packaging had a luxurious feel to it.
Personally, I am fully satisfied with the product as a whole in terms of functionality, appearance, and price.
View detail
Fits: HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADVENTURE SPORTS
It feels like I'much better
About quality and texture : The product is smooth and hard, so I think it will protect the bike well About the feeling of use : When I put the product on, I feel confident that it can be protected when I fall down Products to buy together :There are two types of products, front and rear, so you have to check them carefully Difficulty of installation : If tools are prepared, installation is easy. It takes 4-5 minutes Cost performance and comparison with other products : be satisfied with cost performance About shipping and packaging :Packaging and delivery work well Any concerns, cautions, or advice when purchasing : I recommend that you install both front and rear products View detail
I purchased this product to install a Fog Lamp.
I installed it on a 2020 vstrom 650.
Even with Under Cowl, you can still manage to install it.
I'm happy to see that the Fog Lamp I wanted has been installed!
View detail
When in doubt, this is the way to go.
At first I wanted the SRC Engine Guard.
If it's expensive because of my personality, even if I have some Damage. "We're still good, right?" When
I made it a pooch because I would have used it.
It came in a tight package, as expected from Puch.
Fortunately, there is no position gap, and I was able to get it on properly by tightening each part a little bit.
Instruction Manual is a paper Quantity:It was 1pc. and all in English version, but anyone can understand it by looking at the pictures, so as long as you have the tools, you'll be fine.
I'm not sure what the clearance with Under Cowl is like.
If you're wearing Under Cowl, you might want to check it out first.
View detail
It works great for standing up.
I installed it on my 2010 MODELF model.
On the Right Side, you just need to replace the bolt on the Engine Mount.
The Left Side will have to be worked on by removing the Side cowl.
There are many hidden screws on the Left SideSide cowl, so it is difficult to remove them.
It is difficult to install without removing it.
It doesn't look bad after installation.
However, the mounting position of the Quantity:Pair (for Left and Right) I'm curious because it's asymmetrical in
There will be people.
It's been 6 years since it was installed and I've had to replace my motorcycle twice in that time.
I beat him.
The first time, I was standing up and I didn't fall down with Bataan, but I could stand it.
Because I knocked down the Motorcycle to the point where I felt like I was supporting it and gently placing it on the ground.
The underside of the Slider was only slightly scratched.
The second time, when I applied the Maintenance Stand, I accidentally hit the wrong button.
I beat him.
However, the Slider was damaged, but the body was not damaged by the footpeg
The Knee Slider is broken and the Exhaust System needs a little bit of a good look.
It was just a small scratch that I couldn't see.
The damaged Slider is only damaged on the lower third.
It's not a scratch to worry about, and it was originally designed to protect the body.
It's a thing, so if it gets damaged, you can just replace it.
It is much cheaper than damaging and replacing the Cowletc.
View detail
Fits: APRILIA SHIVER 750, APRILIA DORSODURO1200, APRILIA DORSODURO 750 08 -17, APRILIA SHIVER 750
It's beautiful to look at.
I've imprinted my impressions of the last time I installed it, but I've found a picture of it and I'm attaching a picture, this Slider is a rare shop that will handle it, so We-Big is handling it for me, and if I want to ride the Dorso FACTORY again in the future, I'll buy a Repeat! View detail
Fits: APRILIA SHIVER 750, APRILIA DORSODURO1200, APRILIA DORSODURO 750 08 -17, APRILIA SHIVER 750
Engine protection for $10,000
I used it for the Dorso FACTORY.
I put it on to protect my car, which is hard to get parts for when I run the MOTARDCourse.
Since it is usually my wife's toy, I put it on for protection so that it won't break no matter what. Fortunately, I was able to live with the Dorso FACTORY for 3 years without falling over. These Items are very good for a large area of protection.
View detail
Fits: YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA YZF-R1, YAMAHA YZF-R1M, YAMAHA YZF-R6
Very good quality!
I bought it for my R1 2020. The installation was very easy and it looks nice. The delivery to Israel was fast, but then there was some problem at the customs. View detail
Fits: YAMAHA MT-10, YAMAHA MT-10 SP, YAMAHA YZF-R1, YAMAHA YZF-R1M
Very good quality and fast delivery!
I bought it for my R1 2020. The installation was very easy and it looks nice. The delivery to Israel was fast, but then there was some problem at the customs. View detail