Reviews
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
It was a good purchase
Installation is not difficult if you have the proper tools and basic maintenance skills. The product itself is well welded, painted, and assembled with good precision.
I am glad I put it on because it changed the impression of the look and gave a sense of volume.
View detail
High quality is realized, seems to be very practical.
[How is it used?
Myself, I don't like Guard, but to use it as a base for fog mounting.
Was the one you received as per Image?
Impressed with the cleanliness and precision of the finish. I think it is a good product for the price.
Was the installation difficult?
The 3 Bolts that suspend the Engine are replaced with the attached special Bolt, so basically, a Jack is required. I think it is easier to work with a smaller Jack.
How was your experience with it?
When I installed it and got on the car, I was impressed by the very high quality of the assembly, which was nicely aligned with the lines of the Radiator cover, as shown in the photo. I was very impressed with the high quality of the assembly.
I have never tried to rub it, but it seems to do the job of PROTECTION well.
[Included Parts:were they on?
The instruction manual is, well, easy to understand.
[Was there anything that disappointed you?
None in particular
Manufacturer conformity is after 2020, and Initial Model does not seem to conform.
The pipe diameter is 25.4mm, so the LED fog bracket fits a wide range of brackets.
LED fogs are in the works, but I will add them when they are installed.
I thought about installing the fogs on the handlebar, but since the R's sibling has a heavier headlight assy than the R, I did not want to add any more weight to the handlebar.
View detail
Great Looking Engine Guard
Out of all the available engine guard in the market, this Endurance Engine Guard blends in the best with the bike itself. Standing afar, you would not be able to differentiate the guard from the black original frame. The tapering of the guard creates a very nice flattering silhouette. Love it very much. View detail
Fits: HONDA REBEL250, HONDA REBEL250, HONDA REBEL250, HONDA REBEL250 S Edition, HONDA REBEL250 S Edition
I'm satisfied
I am satisfied with the quality of the product and the Instruction Manual, etc. If the bolt connection had been stainless steel, it would have been better. View detail
easy to install engine slider
About quality and texture : solid product build About the feeling of use : i feel safe using this slider on road Products to buy together : u can use this on Gixxer 250 Difficulty of installation : easy , just remove original bolts and install bolts provided Cost performance and comparison with other products , pricey but not easy to find similar high quality products About shipping and packaging : very well packaged, fast shipping Any concerns, cautions, or advice when purchasing : product quality is good View detail
Mounted on REBEL 1100
I bought it to install it by myself, but I had to remove the Mount Bolt from the Engine... I thought it was too much to handle, so I had the Shop install it for me. It took about 2 hours even for the experienced staff. I am satisfied with the tightening of the foot and the improvement of the parenthesis. View detail
Fits: SUZUKI V-STROM250, SUZUKI V-STROM250, SUZUKI V-STROM250
DL1000 V-STROM250 2023
[How is it used?
From city driving to touring.
I am satisfied with the way it looks.
Was the one you received as per Image?
As per Image, the welding and ?painting are ?nice.
Was the installation difficult?
The exhaust Layout was changed from the 2023 model year,
I thought the installation would be sturdy enough to install a large size, but it was installed without interference.
I had a hard time accessing the tools. I had a hard time accessing the tools.
Socket, Glasses Wrench, Spanner, Long Hexagonal Wrench
We were able to install it in half a day, making full use of a short Hexagonal Wrench.
How was your experience with it?
It looks good, and if you fall down standing up, etc.
I think it will prevent some Damage.
[Included Parts:were they on?
All Bolts and Washers were available.
[Was there anything that disappointed you?
Not particularly.
Other items that would be helpful
Instruction Manual can be downloaded from the web,
Print it out and work on the installation, it's easy to see.
View detail
Rather, Parts that cure the defects of CT125
The completely unreliable NORMAL Side Stand is changed to a reliable Large Stand.
Before the replacement, it was unreliable with nothing on it.
Installing a Box on the Rear is already on the verge of mocking up.
After replacement, it is so stable that you don't feel the need to add STAND.
The STAND, which was originally squishy, is now tightly
(Endurance does not recommend it) in a STAND out state.
Stable when standing on footpeg
It should be this way from the beginning.
Parts to cure CT125 defects
When replaced, the body of the car is more upright than before.
Handlebar must be turned off to Left to be stable.
Become better at ground under Left than horizontal.
Instruction manual not attached Download required
No mention of pre-installation preparation Unfriendly
View detail
Fits: HONDA PCX160, HONDA PCX150, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX, HONDA PCX150, HONDA PCX160
MC51 (8BK) Used for
Used with Short Stand for MC51 of this company. No problem with installation. I put CushionSponge on the lower cowl because the stand was for another car model and it hit the lower cowl when I paid for the stand. View detail
No longer MC51's standard Custom
It is not used in Short Stand only. It is originally intended to be used in LowdownSpec. and is too tilted in NORMAL state.
The company's for PCXSide Stand boats. The company's for PCXSide Stand boat (EL505K1YA1) The length and angle you are looking for can be achieved by additionally mounting the Unfortunately, there is no board for MC51. If you want to use these together, it is recommended. When replacing, it is best to think in advance how you will pull the Spring.
View detail
I had to remove a lot of stuff.
I had to remove the Shift Pedal, Sprocket Cover, and Pivot Collar to get it off.
Once removed, the rest is easy.
I have a ZETA Side StandExtender, which is a special product for JA65, and there was no interference with the Center Stand, which I was worried about.
View detail
It's insanely good.
I was in a state of yajirobe with just a light push when I put my luggage in the RearBOX, but thanks to this Bracket, I am FirmlyHold ?.
I was worried about what kind of product it would be, but it is a very thick, hard steel, firmly welded, and I had no concerns about its strength from the looks of it. I was not worried about the strength of the product.
The work is easy if you are only careful when installing the stand switch.
View detail
Pricey but worth it.
It is a simple shape, but the steel plate is thick and well painted. The price is high, but the quality is commensurate with the gold price, and above all, it may be rather inexpensive considering that it supports the body of the car. View detail
I like that it's inconspicuous.
It is so thin that you can't tell at a glance.
Frame side Screw hole modification is necessary @ M6
I thought the Manual would be fine if you read the PDF carefully.
Lightly tighten the front, then lightly tighten the back, then tighten the front again, then the back.
In the back, I tightened Bolt while pushing Plate with my knee.
View detail
The anxiety when using Side Stand has been eliminated.
The product itself is quite strong.
The change in position of the Side Stand stabilizes the vehicle when carrying a heavy load such as a Rear box. Personally, I was satisfied with the Large size.
As for the installation, I think it needs to be Torque managed well, so tools and knowledge will be needed.
The only thing is that the distance from the Center Stand is closer, which may be a concern for those who use the Center Stand frequently.
If you are not confident about the work, we recommend that you have it installed at the Shop.
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
Excellent stability
With the Normal side stand, the front of the vehicle tended to float because of the load in the back and the excessive leaning of the vehicle.
This product has a good balance in this area, so I can leave my car body with peace of mind.
I was very surprised to see that the 65 was only available for pre-order. As a result, I installed it on the 65 with various small modifications, but I do not recommend it.
View detail
A stitch in time saves the day
Was the one you received as per Image?
The image looks Polished glossy, but the actual product was semi-glossy and non-glossy.
I am glad that I personally preferred this one.
Was the installation difficult?
Basically, it is easy, but there may be some individual differences, as the pedestal adjustment Washer that connects the lower part of the Frame is included.
There are many intricate parts, and it is better to manage the tightening Torque with ingenuity (because of the co-tightening design with EngineFrame, those without knowledge or experience should be careful).
How did you like it when you installed it?
It may be my faulty installation, but the Left Side is firmly parallel to the lower base, but the Right Side is slightly skewed, and even after tightening, there is still a very small gap.
It is not very noticeable, and I think it is not a part that is frequently loaded, so I have left it as it is.
Personally, I am satisfied because it is very MATCH to the body of the car and the construction is robust enough... ♪
View detail
Fits: HONDA CT125, HONDA CT110 HUNTER CUB
It's solid
Well made and highly recommended!
STAND may roll over when loaded
It will be improved.
Side Stand safety device LEAD cale bull length
Limit!
View detail
Custom for CT125 should start now!
Items that will solve the Side Stand problem for CT125.
The Side Stand is about 10 cm back and the mounting position is about 2 cm lower, so it is very stable.
When a large box is attached to the rear, it falls over when lightly pulled, but when this product is attached, it is completely large and sturdy!
If you are going to customize CT125, we recommend that you put this on first!
View detail
Improved stability when parking
Side Stand BoardEL505K1YA of the same manufacturer is applicable.
It is not listed in the compatible car models, but has been confirmed by the Manufacturer.
If you think it leans too much without Lowdown, please try it.
Quantity for Short Stand and STAND boards:Set improves appearance and stability.
View detail