Reviews
Protect Engine
Product Name
ZETA Zita ED Skid plate
Item Number
D5436
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
15 min.
Required Tools
Torque wrench, hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, etc. would be perfect.
Why did you choose this product?
I chose this to protect Engine, Brand has several, but this one was recommended to me by a friend.
Was the one you received as per Image?
It was exactly as shown in the Image. It looks sturdy!
Was the installation difficult?
It is not particularly difficult. Just screw it on.
How was your experience with it?
I was able to protect the Engine with no problem even when hit by rocks and other objects. HardEnduro seems to have no problem with this.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
I was able to install it this time.
I was able to install it on a new 23 year old car. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Interference with exhaust pipe of PowerBOX.
Exhaust pipe is SP Tadao's PowerBOX and Silencer is YOSHIMURA. However, when we tried to install the bracket, the bracket interfered with the exhaust pipe and could not be installed. I was able to install the bracket by shaving 5mm off the interference part with a grinder.
As for defenses, this will certainly protect Radiator.
It seems to be easy to wake up in case of a fall. (^^)
It looks Matcho and it looks good!
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
No interference with POWER BOX
I installed it on my CRF-RALLY (MD47) and was not sure whether to purchase it or not because I had installed SP Tadao POWERBOXPipe item number:CR2-PB-21 on the exhaust pipe and there was a possibility that it might interfere with the power box. (Incidentally, ZETAPipeTank Guard item number:ZE55-1010 was answered that the POWER BOX part would hit the tank, so we decided not to purchase this item. I bought it with the intention of shaving it with a grinder if the need arises.
As a result, the Limit was not hit. Installation was not too difficult, and there was no interference with the frame or cowl. The style is now more adventure-like. The protection is still unknown because I haven't run or rubbed it yet, so I give it 4 stars.
DirtFreak's response to my last inquiry was very fast, and their response was very thorough and favorable.
View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Tank Guard for current MD47RLY50
I'm glad to see a good product on the market, as there are only a limited number of Guard types for the current crf250RLY50MD47. The Guard itself is safe in the event of a fall, but I am concerned about the strength of the bracket on the body side of the front mounting bracket, but this is not a problem with the product. View detail
Fits: HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRF300L RALLY
Engine Guard for current MD47RLY50
The quality is solid and seems to protect the vehicle body. If the reinforced pipe under the under guard can withstand obstacles, I will try to get over them as soon as possible. View detail
![[Option Parts]ReplacementTip](https://img.webike-cdn.net/catalogue/images/55193/ze56_8939_TS.jpg)
Convenient for length adjustment
When tightening the Screw
It would have to be a narrow Socket to fit.
I fixed it with Locktite243.
It has loosened under the weight of the car.
I fixed it with Locktite263 and it stopped working.
Maybe you can't take it off now. w
View detail
It's harder to sink into the ground.
Purchased to make it look more rugged.
It doesn't seem to be a CT125-specific product.
Mounting Bracket slightly interferes with Side Stand
I think that thin rubber plate etc. between the two will not scratch both sides.
The larger area of STAND
It's harder to sink into the ground, so I'm less careful when parking my bike.
View detail
I like that the quick stand has a wider contact surface.
The stand has become wider, so it feels more sturdy, and the clamping force is good.
I don't think you should tighten it too much when tightening it. I think it would be good to give guidance on the level of tension.
The dress-up effect is also the best..^^
I will use it well.
ZETA is also good.
-------------------------------------------------- -------- The stand is wider, making it a bit stronger and good with a feeling of fastening. I can't tighten too much when I sign up. It would be better to guide the tension level. The Drone Up effect is also the best.. ^^ I will use it well. Zeta is also good. Powered by Google Translator
View detail
Exactly to crf250rally17in.MOTARD!
The OEMSTAND was in an upright position, but as expected of an exclusive product, it is Exactly. The Bolt is very hard to install, so you will have to have the right tools to lick it off.
Seat height is too low, so I am considering high seat!
View detail
![[Option Parts]ReplacementTip](https://img.webike-cdn.net/catalogue/images/55193/ze56_8929_TS.jpg)
80mm for MOTARD in WR
I put it on my WR250R MOTARD, but the height of the STANDIncluded Tip is too low and the motorcycle falls over a lot. It would have been better if the height of the tip could be selected in STANDIncluded Parts:. View detail
I'm satisfied
With its large area, the motorcycle can be stably erected. I didn't know how to use the two rubbers in the components, but I used only one of them. View detail
Forged aluminum is very high strength
It's just STAND, so the only change is that it makes me feel a little better. I put it on my WR250R MOTARD, but the attached tip is too low, so I bought a 55mm tip from Option Parts and use it. I bought a 55mm tip from Option Parts because I didn't want the motorcycle to fall down too much. It would have been better if I could choose the tip height. View detail
Fits: SUZUKI V-STROM 1050XT, SUZUKI V-STROM 1050, SUZUKI V-STROM 1000XT, SUZUKI V-STROM 1000, SUZUKI V-STROM 250
Cospar good
The inexpensive but solidly made unit is secured with a Screw lock after applying Strong Double-sided Tape.
So far it has been working normally with no rattling or loosening.
I know there are individual differences, but in the case of my Motorcycle, it rubs lightly on the Center Stand when the Side Stand is stowed.
View detail
Round and round and round and round … I was in danger of dropping out.
The ReplacementTip (the part that lands on the ground) came loose right away, even though I tightened it! 。 A friend of mine installed it on his new CRF250L vehicle, but it was loose.
I stopped using Bolt of Included Parts:, changed to slightly longer Bolt, inserted Flat Washer→Spring washer→Flat Washer, and tightened it with Bolt, and it did not loosen.
View detail
Required when using Maintenance Stand.
I purchased it together with the Maintenance Stand to replace the ChainMaintenance and Exhaust System. I am very satisfied with the low price and good quality. There is no rattling when using it, and it is very easy to install. I bought it together with Y's Gear's Maintenance Stand, but if you are using yzf-r3.r25 and looking for a Swingarm Spool, I think you can't go wrong if you buy this one. View detail
It is a product of a trusted Brand, so it matched TENERE perfectly!
Zeta is a Brand that I have heard a lot about and felt familiar with, so after comparing similar products from other Brands, I decided to go with Zeta this time. The installation went without a problem and the Parts fit perfectly with TENERE (2024 MODEL).
Since this is a product with a wider leg of Side Stand, it is natural that, depending on the ground conditions, you will kick the ground when setting up the STAND, so we often apply the STAND by pushing the Motorcycle a bit toward the Right.
View detail
Increased stability
The OEM Side Stand also has a larger ground clearance than the JA55, but we installed it to make it more stable. It is easy to install, just fasten two Bolts and it does not interfere with the Chain.
If I had my way, I would like to have colors other than Silver.
View detail
![[Option Parts]ReplacementTip](https://img.webike-cdn.net/catalogue/images/55193/ze56_8919_TS.jpg)
ZETA ReplacementTip
Purchased to fine tune the height of the Side Stand. I am a little worried when parking the car because the body of the car is a bit laid down, but so far it is Large and sturdy. The length is fixed, so I hope there will be a product that allows free size adjustment. View detail
Zita Forged AluminumKick Stand
I installed it on my crf250lmd47 to make it look cool and solid. View detail