Reviews
Since it stabs and can equip easily only by screwing, it is good. Since appearance becomes a race ish, he is smart. Although he does not want to become hollow, of course, I think that it is effective.
Since it stabs and can equip easily only by screwing, it is good.
Since appearance becomes a race ish, he is smart.
Although he does not want to become hollow, of course, I think that it is effective.
View detail
It's better to have it in a heavy vehicle
It has been a while since I installed it in GSX-R1100, and I had a chance to confirm the effect, so I would like to introduce it to you Report
When I fully locked the Handlebar, I couldn't get the half-clutch to work as well as I thought it would I knocked over the Motorcycle
But thanks to this Slider, the invariably scratchy Starter gear cover ( (EngineLeft Side) is intact
The Bumper effect of a sturdy Normal muffler? Together with Tank and Cowl, Tank and Cowl are intact, and it only took a Wound in Mirror!
Mega sports can be accidental when handling it, so this is a great way to get it done It's a relief
Due to the structure of this Slider, if it falls down at a high speed, it will leave the aluminum base and only the plastic part I think the
In a fall on a public road, a too strong Slider can make the accident worse, so a strong impact can break it It must have been designed in such a way
Also, you have to remove the Slider when you install the Cowl, but you can leave the base attached It is easy to work with
View detail
Installation of Right Side was quite Large strange...
Fallen cannibals... After delivering car carelessly I got stuck on Left 3 times and got scratches on the under cowl...
Quantity with bolt on : Pair (for Left and Right) The subframe mounting bolts are pulled out and mounted, but it is quite Large strangles to hold the self-nuts on the Reverse side. Especially the hose of the radiator is in close contact with the subframe, especially the Right Side, and the tool was difficult to enter is (^_^;)
(I removed the mounting screw and shifted the under cowl, I fixed the nut with the Small Monkey but I think that it is easier to exchange the Left Side if you prepared a 14 mm plate spanner)
The appearance is not exactly how it jumps out, it is natural that you do not know that it is worn if you do not look good.
Perhaps, I think the damage to the cowl is difficult because the slider is grounded even if it falls over.
(On the other hand, if you fall down severely, the attachment part of the subframe and the frame will be useless)
View detail
Fits: MOTO MORINI Granpasso 1200, MOTO MORINI Corsaro 1200
I returned it.
Because it was far too far from the product image
I returned it.
Among Net products, it is said that there are things that are not the same thing as images because they are using images
This was a thing that I could return, but when I can not do it
Since it is described in the product page the reasoning is so self-responsible
View detail
Fits: KAWASAKI ZX-9R, KAWASAKI ZX-9R, KAWASAKI ZX636, KAWASAKI ZX-6R, KAWASAKI ZX-6R
Decorative elements are strong
I did not want to process Cowl so much, so I made it to MINI. Cowl fixing Bolt is easy to install and remove. But it will change looks and change. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z1000 ZZR1400, KAWASAKI ZX-9R, KAWASAKI ZRX1100
The decorative element is strong
Just screwing into the boss at the rear end of Swingarm, pretty much Race ish. I bought Frame slider at the same time, but VinylPipe is rolled into Screw and politeness is transmitted. View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z1000 ZZR1400, KAWASAKI ZX-9R, KAWASAKI ZRX1100
The decorative element is strong
Easy to install, just screw. However, Race ish, it seems quite satisfying. I also like making it solid.. If it is a bit cheaper to say,. View detail
I purchased it as a spare part (^o^)
Fortunately, Body is safe without failing to fall after purchasing, and it fully fulfills its function as an amulet. (^o^)
Just to be sure, I bought Slider Cap as a spare part as I got it.
It was cheap and priced as well as handled by webike, so it was easy to obtain and saved.
It will be appreciated if you can act as amulet as it is. (^_^;)
View detail
Lady Bird Slider Cap
Recently shyly stood up and got stuck, Slider Cap rubbed and broke.
Motorcycle itself was a little scratched in Mirror and SliderBody was intact, so it was nice to wear ~! As it is feeling, Mirror's injury is Touch pan, Slider is Cap replacement and it is satisfactory!. But I have to be careful!
View detail
[Webike Monitor] When the Motorcycle broke down from a wind, the Cowl was stained with the crack, and it thought that there should be no such thing and attached. It worked by itself. [ ] From the Cowl, only a few protrudes and the SL
[Webike Monitor] When the
Motorcycle broke down from a wind, the Cowl was stained with the crack, and it thought that there should be no such thing and attached.
It worked by itself. [
]
From the Cowl, only a few protrudes and the SLIDER50 was disappointed rather than he thought that it was completed and was anew regarded as a thing with too serious drilling of a Cowl although attachment was attached especially satisfactorily.
Since I bought the Standard, possibly it was short, but I wanted die length to a slight degree.
View detail
Fits: SUZUKI , HONDA VTR1000 SP-1, HONDA VTR1000 RC51, HONDA CBR954
[Webike Monitor] Since the abrasion was attached to the Swing arm only by falling lightly by Motorcycle in front of , the necessity for this product was felt after that. Since it can however use also as a receptacle of the Maintenance stand
[Webike Monitor] Since the abrasion was attached to the Swing arm only by falling lightly by Motorcycle in front of
, the necessity for this product was felt after that.
Since it can however use also as a receptacle of the Maintenance stands of a Hook type, the use there is usually main chiefly.
I think that anyone can do it since the
attachment itself is only attached to a Swing arm with a Bolt.
Attachment is impossible if there is no boss in a Swing arm, of course.
By latest Motorcycle, I think that it is attached by almost all vehicle types.
Since it is goods with high
flexibility, if the diameter of a Bolt and Pitch of a boss suit, I will consider [ that which can be attached and ].
View detail
It was attached in order to prevent falling with standing and to reduce the damage of fall at a low speed. Since the attachment was done by a shop with drilling, I'm not sure, but the slider itself has improved and I do not feel roughness. Moreover, it is
It was attached in order to prevent falling with standing and to reduce the damage of fall at a low speed. Since the attachment was done by a shop with drilling, I'm not sure, but the slider itself has improved and I do not feel roughness. Moreover, it is good that it is not strangely conspicuous. View detail
It was attached in order to prevent a falling with standing and reduce the damage at a low speed. Since attachment and drilling of a cowl were done at a shop, I'm not sure, but as there are no burr, it may demonstrate the effect as expected.
It was attached in order to prevent a falling with standing and reduce the damage at a low speed. Since attachment and drilling of a cowl were done at a shop, I'm not sure, but as there are no burr, it may demonstrate the effect as expected. View detail
Since it stabs and can equip easily only by screwing, it is good. Since appearance becomes a race ish, he is smart. Although he does not want to become hollow, of course, I think that it is effective.
Since it stabs and can equip easily only by screwing, it is good.
Since appearance becomes a race ish, he is smart.
Although he does not want to become hollow, of course, I think that it is effective.
View detail
It attached for the damage mitigation at the time of a fall. Wearing was attached by touch with very easy and sufficient sushi.
It attached for the damage mitigation at the time of a fall.
Wearing was attached by touch with very easy and sufficient sushi.
View detail