Reviews
5550
I purchased a footrest (Product # 7624) for my Honda Monkey, but my model has an engine lock when driving with the footrest not removed. To bypass this blocking, I needed a decoy. I am very pleased that the manufacturer took care of this problem!!! I had to work hard with the installation (this is due to the difficulties of getting to the connector), but everything was successful. As a result, it works great! I am very satisfied!!! View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
The footrest for Monkey
I bought a footrest for a Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is what you need. It came up without any problems, the installation is fast and easy. The price and quality are minimal. I recommend it to everyone. I bought a footrest for the Honda Monkey, I really liked it because it is made of aluminum and is not adjustable - the length of 19 cm is just right. Fits without problems, installation is quick and easy. Minimum price and quality are high. I recommend to all. View detail
Fits: HONDA MONKEY, HONDA DAX, HONDA GORILLA
Kick Stand
The prefect way to add a kick stand to a honda monkey with rear sets, attaches to all 4 bolts under the engine and keeps it looking stock View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
A simple part that helps to bypass a faulty switch
About quality and texture, I can confirm that the quality is great and that the materials used are a combination of white moulded plastic for the plug, copper spade fittings for the electrical connectors and black insulated wiring for the jumper wire. About the feeling of use, This simple part has helped to bypass my faulty side stand switch and get my Grom up and running again. Products to buy together, While working on the wiring on the bike it would be ideal to also add a USB charger to your cart for the convenience of charging your mobile phone. Difficulty of installation, I can say the fitment of the side stand switch canceller for my installation was very easy due to the open access to where this plugs into the main harness and the plug and play design where no modifications is required. Cost performance and comparison with other products, The pricing of the product is great. You receive a product made from quality materials that does away with the original part that can fail causing problems and saves weight and space, also available from Kitaco at the same price. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
Cheap!
MONKEY 10Inch, 9cm RONSUI is just right.
The only glitch is a subtle Gap in the ground surface.
I also use OEM Product Bolt and Nut to prevent Bolt from falling out, just in case.
This product is fixed only for Bolt.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
ขาตั้งข้างมินิโมโต ใส่มั้งกี้ 50 รูปทรงการออกแบบดีครับ แต่เนื้ออลูมิเนียนยังนิ่มไปนิดครับ แล้วอีกอย่าง ตัวหนอนที่ล็อคน๊อต ถ้าล็อคไม่ดีจะหลุดหายง่ายมาก View detail
I finally found a STAND that fits the length!
Used on RZr with modified suspension.
This is the third Size purchased via the company's 275mmAluminum→255mmSteel.
I finally came across a STAND that fits the length.
However, so far, STAND has not been overloaded by standing up too much, but this time it will be overloaded to some extent.
Since it is for MONKEY, the first question is whether it is strong enough or not.
View detail
Side Stand Length Adjustment
I have been using their 275mm for MONKEYAluminum side stand on my RZ250R, but it is too long and seems to fall over against me, so I bought this one, which is 20mm shorter.
Note that the bolt is fastened from the reverse side, so it cannot be attached unless there is space on the reverse side.
The RZr cannot be fitted with the supplied Minus Volt because the chamber gets in the way, so we used an OEM Hexagon Bolt and managed to fit it.
As a result, installation was no problem at all, but Alignment was almost the same as the 275mm STAND.
Was the original Aluminum Stand scraped and shortened?
Well, this is also the best part of the actual matching diversion.
Good thing it was inexpensive.
View detail
Used for SUPER CUBC125
Side Stand of c125 is a little short or the body tilts a lot.
However, Side Stand for C125 is not available.
Utilize Side Stand for other car models
It does not come with Adjuster, so you need to measure the length properly.
Must be purchased.
View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
easy and convenient
It is convenient to start the Engine with the Side Stand out by simply installing it with Couplet-on.
It is a simple but useful product.
View detail
Fits: HONDA MONKEY (FI), HONDA MONKEY (12V), HONDA GORILLA (12V), HONDA MONKEY 3.1PS (6V), HONDA GORILLA 3.1PS (6V), HONDA MONKEY 2.6PS (6V), HONDA GORILLA 2.6PS (6V)
KSR80 Sides Land
I was wondering if I should paint it or replace it with custom parts, but this product looked like it could be used, so I bought it at my own risk. I was wondering if I should paint it or replace it with custom parts.)
It was almost the same length as the OEM one, but the KSR one was slightly angled at the base, and that was the part that bothered me.
The KSR is located on the outside, so you will need to modify the screw so that it is on the front side.
Also, although the screw size of the mounting part is the same, the Bolt of this product cannot be used (it can be used if the diameter is made smaller), so I used the KSR OEM as is.
This product has a zagged surface, which interferes with the flange of KSROEM's bolt with flange, and the shaft of this product's screw is large, so the hole on the outside is between φ1 In order to use KSR's screw, you need M10 Washer or Spacer that can fit in the counterbore. If you want to use KSR's screw, you need M10 Washer or Spacer.
I used a grinder to grind off a portion of the product so that the KSR Bolt flange would not interfere.
I also adjusted the thickness of the Washer.
When I raised the stand, the position of the end of the KSR would interfere with the Swing Arm, so I set the tap up so that it would hit the end a little closer to the end and adjusted the stop position with the bolt.
That way, interference was avoided.
Lastly, the lack of an angle makes the vehicle more upright when the STAND is applied compared to the OEM.
It took a little work, but I was able to install it successfully.
Diversions are at your own risk.
It looks great and I'm personally satisfied with it.
View detail
Fits: HONDA MONKEY (FI), HONDA MONKEY (12V), HONDA GORILLA (12V), HONDA MONKEY 3.1PS (6V), HONDA GORILLA 3.1PS (6V), HONDA MONKEY 2.6PS (6V), HONDA GORILLA 2.6PS (6V)
Diverted to RZ250R
I diverted it to 51L with 3MA feet front and rear.
I have no problems at all with the fitment and can use the included Spring, although it is a little weak.
You can also gain more clearance with the Chamber than with OEMSTAND, and you don't get hit by the Chamber anymore.
I think it depends on the setting of the undercarriage, but I park with care on the slope because it is a little too long impression and standing.
It may be too long to use on a body with NORMAL suspension.
View detail
for 12-inches, but I think it's better to actually measure it.
I bought this for when I installed NSR50's 12Inch wheel and NSR50n's Swing Arm on my MONKEY.
It is Exactly in the length, but because it changes a lot by the length of the Swing Arm, it seems to be better to buy it by actual measurement.
In the photo, Right is for 10-inchesSTAND, and Left is STAND of this product.
For the price, it's surprisingly rust-free and durable.
View detail
I used it to repair
[How is it used?
I bought this one because my original Side Stand Spring ran away from home somewhere in Race.
Was the one you received as per Image?
It was just like the picture.
Was the installation difficult?
Just hook it up.
How was your experience with it?
It was a little long, it would be great if you could commercialize it in 5mm increments.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
There is nothing because of this price.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Spring hook (https://www.webike.net/sd/23616711/)
You can try your best with a slotted screwdriver or something, but if you buy a tool called Spring hook, you can frame it super easy.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
I've always wanted one of these!
For maintenance work around the rear, I used Maintenance STAND to float the Rear Axle, but my 4MINI "APE100." When "Gorilla Kai 88." In this case, GORILLA with 8-inches wheel is more unstable than APE with 12-inches wheel because of the swing arm angle of 4?
webike's. "Model." I was just casually looking around using the product search function on each page, and I found it.
"Center Stand!"
Buy it immediately! Yamato delivered it to me at exactly 19:00 on the next day with a 19:00-21:00 arrival time.
I unpacked the bike, removed the NORMAL from the unstable maintenance stand, replaced the side stand, wrapped the frame with gummed tape for waterproofing and tie wrapped the frame with the switch that I forgot to put back on the side stand. and tighten 4 mounting bolts with 13mm socket wrench, installation was completed before 21:00!
Fast, cheap, good, and convenient, just like a beef bowl at YOSUNOYA!
This Main・STAND Return・Spring is properly double wound and carefully finished.
However, there is no bar to step down with your foot when you stand STAND, so you need to stand STAND by holding it with your foot behind the ground point of STAND like you stand both legs STAND of bicycle.
Tools are easy if you have Spanner or Socket Wrench and Spring Hook.
In the case of a machine equipped with a Rear Box, such as our GORILLA, the front wheels may become floating when the Main stand is set up because the Rear is heavy.
View detail
This is good!
I use Z50JMONKEY for commuting, but the parking lot of the station is too small and I wanted Center Stand, so I looked for it. This time, I chose the one with OEM footpeg and Side Stand. The Center Stand makes a gap between the rear wheel and the ground, so maintenance is easier. However, I think that it is not possible to install it if the Rear is made into a wide Wheel. I am grateful that Bolt and collar are attached so that I can use either 8Inch or 10Inch. View detail
manual beginner
I am a beginner in hand assembly. I'm not used to it and I tore the tube many times and put it on and off many times, so the Rim Guard got a hole too. If you are new to this, Quantity:It might be better to have about 2 sets. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
10InchMONKEY
10InchTire.
10cm Long Swing Arm, 280mm suspension.
This Spec. is the shortest and just the right length.
If you look carefully, the texture is worth the price.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
To a monkey.
If you look at the details, there are some rough spots in the finish, but I don't think there are any problems. View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA, HONDA GORILLA
It came on without any discomfort.
It was installed as usual. It was easy to install as long as the existing parts (STAND) were removed and the vehicle was supported. View detail