Reviews
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
For Tire sizeUp.
[How is it used?
Installed for Tire sizeUp of YamahaPOCKE.
Was the one you received as per Image?
As shown in the image.
Was the installation difficult?
Bracket was not used, but Others parts were available.
How was your experience with it?
There are some areas where the color has peeled off, but I think that's okay, for example, because it is inexpensive.
[Included Parts:were they on?
As shown in the image.
[Was there anything that disappointed you?
Nothing in particular, but I am a little concerned about the rusting tendency of the product in the future.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, Others
The length can be fine-tuned and the large size is convenient. I recommend it!
I purchased this product when I converted my Grom jc75 to Ron Sui. The length can be fine-tuned and it is a perfect product in terms of cost. However, compared to the OEM product, the precision of the parts used to connect the STAND to the car body is slightly less than that of the OEM product, so there is some play in the connection. I am convinced that this is unavoidable because it is a Universal Product, and of course, it is a Level that does not interfere with use. The reason I did not give the product a perfect score for quality, texture, and feel is that I took this play and gap into consideration. For people like me who want to enjoy adjusting ride height over time, this product will be a reliable partner. View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
Used for SUPER CUBC125
I bought it because it is a little short in NORMAL and the body of the car leans a lot.
Side stands switch is not included.
Connector was removed and directly connected.
Attached Bracket is not used
Then, just pump it in, adjust the adjuster to the desired height, and you're done!
Steel, but with Side Stand with Adjuster that can be used with C125.
It is probably the cheapest.
View detail
Fits: HONDA Monkey gorillaetc.
MONKEY by changing the suspension Bought to correct the inclination
I used a spring hooking tool to replace the spring, but if I had removed the fixed bolt, I wouldn't have had to remove the spring every time.
I bought 190mm and was able to correct the tilt as desired. I think the texture is okay. The paint is good.
I have removed the sensor, but it can be installed.
View detail
I'm mostly satisfied
Adjustable for MONKEY125 side stands switch I was looking for a stand and I found this product I bought this stand for Grom and installed it as it is almost compatible with MONKEY125 It looks good and the side stands switch works well
I'm just worried that Spring is too hard and Spring hookBolt won't fly
View detail
It may take some modifications to install
Originally, the NS-1's were diverted, but I changed the rear suspension from 380mm to 400mm I bought a 260mm one because of this, and it was helpful to have a longer one
However, because of the BALI in the mounting area, it didn't lock when I took out the STAND
I was about to fall over when I lightly pushed the car forward, so I had to align the front side of the mounting area with BALI and 1 i shaved about 1.5mm
It was only a light process, so well, it's inexpensive and it's a good price
The rest of the time, I guess you have to be careful with your hands because of the scraps sticking to it
View detail
Some processing was necessary.
Although there was no problem with the installation of the Body, the mounting part of the Side stands switch was slightly different from the OEM, and it was necessary to adjust several Washers on the mounting part of Switch and Side Stand.
In addition, I think that it was good that a manual was attached as it was a simple thing.
View detail
It looks good.
The price is cheaper than other Manufacturer of the same shape, it looks good.
However, the finishing of details is indeed inferior.
As for installation, also, Washer between footpegBody and footpegSwitch
If you do not install it by pinching it, it seems that the Switch does not work properly and some processing is necessary.
Since instruction manuals are not attached, it is necessary that Service manual is required - - -
View detail
It is good to be able to adjust!
I used it for Grom's 181 Full Custom.
Even at Grom Meeting, there was no person exchanging until Side Stand, and there was a sense of superiority.
Exchange of Front's Inner and Rear suspension, the car height was a little higher, the inclination of Motorcycle was getting stronger.
However, this item can adjust the length.
When it stretched about 15 mm from NORMAL, it got a good gradient, and it looked more like a custom motorcycle.
Although it is the preciseness of the Cut-out of the bottom, I feel that it is somewhat inferior to Takekawa etc..
But, this may be normal.
It feels like running, but there is no rubbing even if it is banked, there is no funny feeling at all.
From this price, I think that it is a good product.
View detail