Reviews
Effective for dress-up
As others have mentioned, it works for Dress-up. I think it may have some practical use, but I think it is best not to test the effect by falling down. View detail
It won't break when it falls! Won't get crushed! Protects the body of the vehicle!
Not a single Review! For such attractive PARTS!!!! LOL!
First of all, I installed these parts and fell down!
The Engine and Cowls are intact! It's a tough Material and it's only scratched!
Machine protector is essential not only for circuit driving but also for touring!
The Damage you get when you fall over is a big difference with Parts that cost only 20,000 yen, so…
View detail
Guard firmly.
I purchased this product to protect my engine in case of a fall.
Installation is relatively easy, as it simply replaces the existing Engine Mount.
The length of the DURACON seems to be too short as it is, so it would be better to add a spacer or change the DURACON to a longer one to reduce damage in the event of a fall. If it is a pimped out bike, the engine may be protected, but the footpegs will take the damage. It is made to be very sturdy, and even if you use it as a footrest and stand up, it won't falter. I've fallen on the Circuit countless times since installing it, and the only time the Duracon broke was when I hit the car behind me, and it didn't break on the SlipDown.
The z125 itself has a long handlebar, so it is the end of the bar that comes into contact with the ground first, and I don't think it is necessary to install it for touring.
Please note that DURACON provides Repair Parts for up to one Bolt, so the Quantity:I think it is a product that can be used for a long time if you buy one set.
It looks like it can be used as a mount for GoPro.
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI ZX-6R, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 400R, KAWASAKI ZX-14R, KAWASAKI For vehicles with mounting bolts of M10, KAWASAKI ZX-14R, KAWASAKI For vehicles with mounting bolts of M10
Deeper Green alumite
Z1000 (2016) Installation to
It's a universal product but it fits well
The installation bolt that comes with the product is a 10mm dish bolt, but the 2016 Z1000 is an 8mm Since it is an installation, I used an 8mm dish Bolt that I had in my possession
Green alumite is a slightly darker Green Light
The price seems a bit high, but otherwise I'm happy with it
View detail
Maybe the best of the Guard?
It's subjective, but I think it's the most out there and would be useful as a Guard. protector There is also a sale of only and After looks good too
However, I removed it because I put a catch tank on the Left Side of the car I thought that I could put Only Right, but I stopped
View detail
I do not want to check the performance
I purchased it because I wanted to reduce Damage to Machine as much as possible when falling down.
I thought that the product photo does not fit the car body in White, I was hesitant to hesitate to purchase so far, but when I look at the explanation column carefully the color is written as Black and decided to purchase.
There is nothing difficult to install because it is only tightening to the existing Bolt.
I think everyone can do it in a few minutes.
Although it is Protection performance, I do not know because I have not fallen after installing, and it is better not to have a chance to understand.
Since Body is a black blob without any decoration, I think at least that there is Marking of Manufacturer logo at least.
View detail
For Dress-up ....
I wanted to add Gold parts, so I thought that practicality would be almost none but even purchased.
It is easy to install because it is only installing Screw. (About 10 minutes in the whole process)
Included Parts : It has an angle Adjustment Collar attached to the Reverse side, so that it is possible to take Balance of Swingarm and Hook installation.
It is not a big part, but it stands out surprisingly. It is good for self-satisfaction.
It is a color, but Orange is more sexy than Gold.
Manufacturer has different shades so Balance What's bad is that you are charming.
View detail
What is Slider?
I also wrote about the impressions of other products, but when I talk about Engine Guard, it is a generation that only Pipe made me chew on Frame, so this is also "What is Slider?" That's why.
Since I return for the first time in 10 years, I guessed standing up inevitably, just in mind I made insurance with OEM Engine Guard and Double.
It's pretty cluttered, unfortunately it's packed with a feeling of retrofitting.
Is the protrusion about the same as OEM's Engine Guard?. When mossed, which one becomes a cane is a subtle place.
However, if it falls to Right, I do not think that I think that the Exhaust System will be hit earlier than anything else ....
I do not know if the quality is such a situation, so I think that it is better not to know it if possible.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D Tracker X, KAWASAKI D tracker
The object for kawasaki D-TRACKER-Xs is purchased. although he thought that the description was also polite and it could attach it, without suffering troubles for anything -- -- the Bolt of the Engine-hanger part currently attached from the firs
The object for kawasaki D-TRACKER-Xs is purchased.
although he thought that the
description was also polite and it could attach it, without suffering troubles for anything --
-- the Bolt of the Engine-hanger part currently attached from the first could not be removed, but everything but the
thought suffered troubles.
Since the Skid plate of
other company has been attached previously, the
fixing position is also restricted.
Although look before you leap was thought and being attached, it wishes not to stand on
abbreviation.
View detail
Fits: KAWASAKI KLX250, KAWASAKI D Tracker X, KAWASAKI D tracker
since the accident was kept -- it is top priority about protection of a car body -- it says -- it considered, came out and attached. Even if it had to depend on Schopp since the bolt was hard, but thrown now, it is peace of mind first.
since the accident was kept -- it is top priority about protection of a car body -- it says -- it considered, came out and attached.
Even if it had to depend on Schopp since the bolt was hard, but thrown now, it is peace of mind first.
View detail
Fits: KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI D Tracker 125, KAWASAKI KLX125
The D-trucker 125 was equipped with the machine protector. It equipped with these goods in order a short wife may ride, stood, and to have reduced the damage to a car body since GOKE is anxious although a design is not unsatisfactorily pleasing indivi
The D-trucker 125 was equipped with the machine protector.
It equipped with these goods in order a short wife may ride, stood, and to have reduced the damage to a car body since GOKE is anxious although a design is not unsatisfactorily pleasing individually.
Although it is No. 1 that there is no degree of an effect from a part for -- -- (^^;
View detail