Reviews
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
SNIPER SnaRacing Stand Hook with Sprocket guard Type C
I installed it as a decoration! I don't know about the functionality of the Racing Stand since I haven't used it. View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03
Stand Hook for easy lift up
Purchased for use with Racing Stand.
Compared to the Spool type, the Spool type does not protrude laterally and has a smaller Damage at the time of tipping.
The installation seems to be a hassle since the Type requires fine adjustment. The structure is such that it is likely to shift its position while being used.
It can be used without any problem in terms of feel. The texture is not bad.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It also prevents damage in the event of a fall.
I changed to Racing Stand Hook in consideration of tipping over because of circuit driving.
You can use JTrip's STAND.
The color selected was Green Light because it is Kawasaki.
Color Matching is good.
View detail
Stand Hook
I installed this on my 23 cbr250rr. It is well secured and solid and I am not worried about it falling over. View detail
Dress-up
Using Lift jack is now much easier.
The installation was a bit tricky, as the angle of the fixing spacer needed to be adjusted when tightening the bolt.
View detail
Put it on for now and acquire a sense of security
I bought this as a countermeasure against standing and staggering on the street in Main.
For CBR250RR, there are about 3-5 types of engine sliders, but the protrusion is longer and more secure.
The metallic red design makes it comfortable to wear and can be used as a substitute for colored parts.
I am worried if I really know how to put it on since there is no Instruction Manual.
Especially Quantity:Pair (for Left and Right) I didn't know which one to lengthen, and I also didn't know how to use the long stick at first.
Also, the price was a little high, so I would have liked it to be a little less expensive.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Prevention of damage in the event of a fall
Bobbin type was replaced with Plate type because the Swing Arm was damaged when it tipped over.
Plate is thick and rigid, but a little heavy. (about 120~30g) I wish it was under Spring so I could have had it butchered or something.
It also serves as a Sprocket guard, but the distance is too far away to have much of a Guard feel.
The feel is more stable than Bobbin type.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI Z650, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
It has presence!
It has more presence when viewed from the SIDE than the common circular Stand Hook. It is highly self-satisfying. (Lol) View detail
Fallen cannibals
It was installed as an insurance policy before the fall.
It is chunky because of the CenterPole.
Installation is difficult to understand due to the simplicity of the Instruction Manual.
If you are familiar with this product, you can easily install it.
Locktite should be prepared separately.
View detail
Maintenance
I bought it to run the VHook, and I personally think it's a necessary piece of equipment for working alone. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Bolt is heavy
I changed from Hook type to Plate type.
The weight of the Hook type is about 54g (Both Sides), while the weight of the Aluminum Bolt is about 140g + 95g, which is a little heavier.
Hook type is prone to damage on the swing arm, but this product can be hung with little concern.
The stability and lift resistance is better than the Hook type.
Sprocket guard is attached, but the distance to the chain is far, and I think it is less protective than the one attached separately to the Swing Arm, but only a real Racer would care that much...
View detail
It's cool
It is likely to protect Cowl to the extent of standing moss. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
Stable
With a normal StudType, the head of the Bolt will surely be shredded off when it is cocked, and the core of the Bolt will remain in the Swing Arm, which is Large. If you are not careful, the bolt may be torn off from the Swing Arm. This product is almost flush with the Swing Arm, so it will be durable and will not interfere with the Exhaust System. View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
Mounted with 8BL-ZXT02L
It's also convenient for maintenance.
I am satisfied because it looks good.
View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It is easy to install. and STAND easy to hang.
The careful Instruction Manual allows you to install without hesitation. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
The modest size makes it easy to dress-up.
I was looking for Axle Slider and after some hesitation, I chose this one.
I was looking for a moderate size because I thought it would be unproportionate if it was too large or too assertive.
On the other hand, I also want to add Gold because I have solidified the area around the rear with Gold.
After much hesitation, I came here in search of Balance, which can add color without losing style.
I have the impression that the color will fade a little quickly, but I think the emphasis is on the design, so...
I will review the performance as a slider when I fall over.
Installation was no problem and the Instruction Manual was helpful. I didn't know what the proper Torque was, so I tightened it with a Fee Ring. I don't remove it often, so I tightened it a little bit...
View detail
Satisfied
I bought it as a dress-up and I am satisfied with it. It has a sense of luxury. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA650, KAWASAKI NINJA650, KAWASAKI Z650, KAWASAKI Z650RS, KAWASAKI Z650, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
There is a sense of stability and security in STAND use
Installed together with J-TRIP's VPlate receiver (JT-R107W) for use with NANKAI×J TRIP's NarrowRoller stand. (STAND confirmed to be compatible) And it is ExactlyFit without a problem as shown in the product description.
I also took into account the opinion that the V receptacle is more stable, and I like the design and bought this product.
View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-25R SE, KAWASAKI NINJA ZX-4R, KAWASAKI NINJA ZX-4R SE
ZX-25RAxle Slider
I have been waiting for the release of the Axle Slider as I have been using SNIPER products for all my ZX-25R parts!
It was finally released and I immediately bought it at Webig!
The product has a choice of colors like SNIPER. I bought Gold because I unify it with the Parts of the goal.
One point I think it is very stylish.
The installation must be done from the left side, but it is also written in the instruction manual, so even beginners can do it.
I think I can install it without any problem.
You will need tools of course. 2 Hexagonal Wrenches will fit. You can't do it with one wrench because you have to tighten both Sides.
The purpose of the Axle Slider is to make the vehicle slippery in case of a fall on the Circuit, not for a standing fall.
So it will not be effective in street driving at all.
View detail
It seems to have a certain effect on Cowl protection when standing up.
I was able to confirm the actual use of the product, so I will give you an imprecation.
I had a miserable standing injury during a UTurn at the pass.
The direction of the fall was right, but when I checked the damage immediately after the fall, as for the damage and the damaged part
Corner of RightMirror
Brake Lever
・RightKnee Slider
・YOSHIMURA R-11 Slip-on Silencer
But, as for the Cowl of the key, there was not a single scratch because Slider was more protruding than Cowl.
As for Cowl protection, it seems to have some utility.
Because it seems that Repair Parts in SliderDURACON part Single Body is sold, I think that I will exchange it and try to use it again.
View detail