Reviews
Parenthesis good!
I installed it and I am satisfied with its appearance and Parenthesis.
However, the Change Pedal and the sub-frame interfere with each other because the engine is set to 125cc, and it seems that some ingenuity is required for installation.
View detail
4lMONKEYTankCushion
The quality of the product was good and inexpensive View detail
Disappointment!
I opened it the other day as the other parts were coming together and found that the Frame was dented. You should check it as soon as you receive it. View detail
3cm longer but stock look
Here is my second frame I purchased from webike and I'm pleased with the quality of these.plus being 3cm longer than stock helps with engine choices. I use the zongshen zs190cc engines for mine and have plenty of room between the fender and head of the engine. View detail
Quality for a low price
This was my first frame purchase and am glad I ordered it.i used this to build my first monkey z50j and here in the states I was able to register it for street legal use. View detail
Monkey frame
For the price of these aftermarket frames they are good quality and exactly like the honda z50j monkey. These are replacements but I use them to build custom bikes. View detail
Monkey z50j
For the price you can't beat it.this is my third frame I've ordered and I'm satisfied with webike.japan for delivery and price.with the 3cm long frame I'm able to install a zongshen 190cc engine with ease. View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
For Tire sizeUp.
[How is it used?
Installed for Tire sizeUp of YamahaPOCKE.
Was the one you received as per Image?
As shown in the image.
Was the installation difficult?
Bracket was not used, but Others parts were available.
How was your experience with it?
There are some areas where the color has peeled off, but I think that's okay, for example, because it is inexpensive.
[Included Parts:were they on?
As shown in the image.
[Was there anything that disappointed you?
Nothing in particular, but I am a little concerned about the rusting tendency of the product in the future.
View detail
Fits: HONDA MONKEY, HONDA GORILLA, Others
The length can be fine-tuned and the large size is convenient. I recommend it!
I purchased this product when I converted my Grom jc75 to Ron Sui. The length can be fine-tuned and it is a perfect product in terms of cost. However, compared to the OEM product, the precision of the parts used to connect the STAND to the car body is slightly less than that of the OEM product, so there is some play in the connection. I am convinced that this is unavoidable because it is a Universal Product, and of course, it is a Level that does not interfere with use. The reason I did not give the product a perfect score for quality, texture, and feel is that I took this play and gap into consideration. For people like me who want to enjoy adjusting ride height over time, this product will be a reliable partner. View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
Used for SUPER CUBC125
I bought it because it is a little short in NORMAL and the body of the car leans a lot.
Side stands switch is not included.
Connector was removed and directly connected.
Attached Bracket is not used
Then, just pump it in, adjust the adjuster to the desired height, and you're done!
Steel, but with Side Stand with Adjuster that can be used with C125.
It is probably the cheapest.
View detail
It's tight and nice.
Unlike the OEM STAND, I am satisfied with the Large change due to the quality and ease of installation.
According to the other imprements, the sensor of STAND needed to be adjusted by Washeretc. when installing the sensor of STAND, but in fact, there was no such problem, and the sensor of STAND was working fine just by replacing the OEMSTAND with the new STAND. In fact, it did not happen. I just replaced the OEMSTAND with a new STAND and the STAND's Sensor worked fine.
View detail
Seems strong for the price.
If the MONKEY has 12inch wheel, 330mmRear suspension, and the Swing Arm is about 20cmLong, it should be about 260m. It is a little too far down, so it is just right to adjust the rest by using a collar.
It's STAND, so even if it's cheap, it's good enough because it's something that will get scratched whether it's of poor quality or not.
View detail
Not at all?
The year should be correct, but I can't install it at all.
The Pitch of the Screw does not match the Engine side at all.
Garbage
View detail
Frame for monkey
Good product, fast delivery,good company ,frequently updatedinformation about the shipmentof the product the next I buy again from webike thanks for yours cooperation View detail
Tanaka Shokai Main stand
Minimoto PerformanceZ-1 125ccEngine installed, the OEMfootpeg interfered with the engine. Tanaka Shokai Main stand purchased
The result was an exquisite Clearance that did not interfere with the Engine.
Since it is lower than the OEMfootpeg, the Brake pedal position will be a little higher.
For reference, there was no problem if the Pedal position was lowered to accommodate.
View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
This is a necessity when attaching Rear Sets.
Installation is very easy, just remove the 4 bolts from the NORMAL footpegs and reattach them, I had a little trouble putting the springs on because they are not built in. View detail
Fits: HONDA Monkey gorillaetc.
MONKEY by changing the suspension Bought to correct the inclination
I used a spring hooking tool to replace the spring, but if I had removed the fixed bolt, I wouldn't have had to remove the spring every time.
I bought 190mm and was able to correct the tilt as desired. I think the texture is okay. The paint is good.
I have removed the sensor, but it can be installed.
View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
Required for Rear Sets
Type that mounts to the engine with 4 bolts.
It's more solid than the picture and I'm using it without any problems.
I wore 10Inch and added Rear Sets, so I couldn't use Normal stand.
We selected this product and are satisfied with the peace of mind and cost effectiveness.
View detail
Fits: HONDA Fits to MONKEY(except FI) GORILLA etc. Horizontal TypeEngine., HONDA Can be installed on Monkey gorilla etc. Horizontal TypeEngine
I don't even think it's new.
Maybe it's just a matter of price, but
Nut is rusty. The paint is peeling.
Painting is required for installation.
Maybe it's not a problem in terms of yesterday.
Quality control? It's like.
View detail
I'm mostly satisfied
Adjustable for MONKEY125 side stands switch I was looking for a stand and I found this product I bought this stand for Grom and installed it as it is almost compatible with MONKEY125 It looks good and the side stands switch works well
I'm just worried that Spring is too hard and Spring hookBolt won't fly
View detail