Reviews
Is good
MaintenanceMatte was used to prevent the Wound from biting.
The ground surface area is larger due to the Attachment already installed on the Side Stand.
I was looking for a Large Type because the normal Type is too small.
The material, thickness, etc., were also fine.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Side Stand Assist
I was looking for an aid that would allow me to pull it out easily, not to the point of missing the hang.
I attached it to the upper side of the existing foot hook of the NINJA100SX, and it is now in a more comfortable position to hang my foot, and I am satisfied with the cost without compromising the design.
However, since the M5 stop screw is on the stand reverse side, a drill blade cannot be used in amateur installation, and I think a little improvement is needed to prevent gapping.
View detail
I hope this is helpful to you.
for DUCATI Parts with a little modification to BMW.XR. View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Convenient
I use it on my ninja1000sx. I have short legs and the bar that pays with the OEMSTAND leg is too short, so it was very difficult to raise and lower the Side Stand. With this product installed, it was very easy to raise and lower the Side Stand. It was a good purchase. View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
I took it for granted, but …
DUCATI doesn't have a stick to make the side stand easier, which is common in Japanese cars.
It's hard to STAND.
Thanks to thisParts for the help.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
AGUSTA
It is hard to get the STAND out and the height of the motorcycle is high, so it is very safe after installation. View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
It's seriously useful!
I installed it on a Monster1200s 2020
When you put this on, it becomes very easy to put out the Side Stand
Pretty much the Parts of Recommendation!
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
essential
I felt that SCRAMBLER was difficult to take out Side Stand, but I was able to make Stand End I thought I could manage to put it on, but in the end I couldn't, so I installed it after a while since I bought it
After I installed it, I wondered why I didn't install it sooner..
Installation is a Universal Product, so some tolerance is needed, but it is not necessary to tighten it I thought there was a possibility of loosening even if I got into it, so I made STANDBody to prevent rotation I applied Locktite to prevent it from loosening
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
Helpful Items
Because there is no SIDEStand Hook on the motorcycle that I purchased, it is a substitute for Size I bought it after checking only
It's not pushed as a compatible car, but I managed to install it safely and it's easy to put the Side Stand in and out It's easier now
To be honest, I was worried about the tapered shape of the tape to make it fall off, so I decided to stop the hexagon nuts of both SIDEs from loosening Quantity from the back part as it looks like a Nut:Screw lock was applied to Set Fixed Bolt
Because it is a product that does not have a welded structure and is light, the side stand can rattle when there is a slight difference in level I've been able to use it comfortably so far without dancing, so I'm evaluating it with high hopes
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
For cars without a Hook
When I changed to a car that didn't have a hook, I scratched my foot where it was located That's the merchandise But when I put it on the top, it's hard to get it out due to Lever's principle
At the bottom, you'll end up scratching that area
Screw lock should be attached
The Hook part looks a bit bent …Stainless Steel Hey
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Although it is not troubled even if it does not need it but a little convenient if there is
It does not mean that the performance improves, there is not a Dress-up effect
No need to worry about it without it ? ? ? But if there is something that is a little useful Items.
The front of Side Stand is just a bit out behind the footpeg
I thought that it was hard to put out from before, but thanks to this product
A little Stress when stopping is gone.
For installation on SuperSport S you have to reverse Screw and Nut
Something's Parts (QShifter?) Since it interfered with it, caution is required when installing.
Also, confirmation of the mounting position is necessary to be done with the Side Stand raised
Because there is no Center Stand or Maintenance Stand, it is a little Large strange.
After installation, I have only gone 1 to 2 times yet
I confirmed Screw and Nut I was able to confirm looseness.
I plan to regularly check loosening, but if you feel relaxed
We are planning to consider using anti-loosening agents.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
This is required
I changed to MULTISTRADA 1200. In accordance with transfer, we purchased various information on Net, but this is the best thing that cheaper and the effect was visible.
As I refer to other people's impressions, the gold amount was cheap so I tried installing it at the time of car delivery, but there is no sense of security at presence or absence. When getting off Motorcycle, I think that it is mostly better to get off Side Stand, but MULTISTRADA does not know where Side Stand can not see from the top in a sitting state (I think that you will understand if you get used to it).
I barely saw in this state that I was able to withdraw Side Stand by somehow only with this installed product.
From the perspective of Design importance, I think this product is a pros and cons, but from the standpoint of standstill prevention, I think this product is essential.
Regarding price, other parts are expensive so it may have been A little paralyzed, but I think that it is a price.
View detail
It is unexpectedly hard and thick
I am putting a Motorcycle in a bicycle parking lot on the Concrete floor. Side Stand scratches on the floor and purchased to prepare the underlay before complaints came out.
It is not that I do not like it, but for comparative study, even if we search similar items with Net, it did not quite hit and it was only this. It is a clearance product.
I thought that it was a soft material like just a round Felt, but the back side is a Plastic board of slickle, the surface is textured plywood, there is the smallest limit decoration as well, I think that it is not ashamed also at the bicycle parking lot.
I think that it will disappear if you leave it in the outside bicycle parking lot. I think that it is an indoor limited item.
Size is about 20 cm in diameter.
The price is a bit high, is not it?.
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
Excellent
In the case of NORMAL, behind footpeg, a little bit of protuberance will hook the heel.
I got used to it now but I can not deny the feeling of uneasiness unless I look at it all the time - - -
I placed it between the Clutch pedal and the footpeg, made a sure "hit" position, and raised the usability.
If you have a habit of putting your toes under Clutch pedal, there is another danger if you do not care about riding.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
It is inconspicuous in a good meaning
Side Stand became a deep position and it was hard for Side Stand to straddle while crossing, so check STAND diameter and purchase.
Installation itself is easy for Bolt fixing itself.
It took a while to determine the mounting position with the Side Stand raised.
Even with the STAND raised, it was hard to see visually from the straddling state, I thought it was a little longer but no problem at all.
When I put a heel in the tip part of STAND it became easier to put out very much as I became able to lower STAND.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
If it is 998 equipped with a Back step, I will think whether to come to a position about like a photograph.As a Title, he feels easy also about the time of Racing-boots equipment, and can cover a STAND.Although the portion caught very slightly only increa
If it is 998 equipped with a Back step, I will think whether to come to a position about like a photograph.As a Title, he feels easy also about the time of Racing-boots equipment, and can cover a STAND.Although the portion caught very slightly only increases, this is a very convenient Items. View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Receipts and payments of the Side stands became very easy only by attaching this. Since it inserts into a favorite portion also about attachment, and fastens and only crowds and fixes with a Screw, it is very easy. Also about appearance, since it is
Receipts and payments of the Side stands became very easy only by attaching this.
Since it inserts into a favorite portion also about
attachment, and fastens and only crowds and fixes with a Screw, it is very easy.
Also about appearance, since it is a simple Design, it is not conspicuous too much and I think that they are functional goods.
It is satisfactory also about intensity.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Dear all I live in Taiwan, I ride Ducati 696, because I think the side parking pillar of 696 is very difficult to stop if people ride on it, so I bought this product and it feels very easy to use after installation. .GOOD! But if you have installed it, it
Dear all I live in Taiwan, I ride Ducati 696, because I think the side parking pillar of 696 is very difficult to stop if people ride on it, so I bought this product and it feels very easy to use after installation. .GOOD! But if you have installed it, it is best to use some screw fixing agent! View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Although attachment took time in position doubling for a while, it was easy. However, since the angle was also fixation short [ the die length of an Arm ], there was only an effect about better than nothing as assistant engine performance when t
Although attachment took time in position doubling for a while, it was easy.
However, since the angle was also fixation short [ the die length of an Arm ], there was only an effect about better than nothing as
assistant engine performance when taking out a STAND.
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
[Webike Monitor] It Is not obtrusive and is nestling up to the Side stands quietly. Although it is seldom conspicuous, a wide swing (smile) when taking out a STAND certainly can be prevented! It is perfect when it is a Reasonable, in addit
[Webike Monitor] It
Is not obtrusive and is nestling up to the Side stands quietly.
Although it is seldom conspicuous, a wide swing (smile) when taking out a STAND certainly can be prevented! It is perfect when it is a Reasonable, in addition a price to a slight degree.
View detail