Reviews
Axle Slider
Easy installation, just insert and tighten up, but the instructions are not good and some washers need to be added to tighten up. Looks good. View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4
A walking stick before you fall3
[How is it used?
We chose this product because we wanted to protect the Swing Arm.
I chose Red to match the body color and am satisfied with the color, which is ideal.
Was the one you received as per Image?
Swing Arm is more overhanging,
Protection is not complete.
Was the installation difficult?
A handling Instruction Manual is included, which describes the torque for tightening the fixing bolt.
I'm not sure if mine was an outlier or not, because the Left Side Bolt length is too short,
Fixed parts had to be machined.
How was your experience with it?
Unlike the Front, it rotates with the Wheel,
Easy to loosen, Locktite was applied to the fixed Bolt.
[Included Parts:were they on?
A handling Instruction Manual was included in the package.
[Was there anything that disappointed you?
The key Swing Arm cannot be protected.
View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI STREETFIGHTER V4, DUCATI PANIGALE V4 SP, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299
A walking stick before swallowing a fall2
[How is it used?
I was not sure whether to choose OEM Product or not, but I decided to choose this product to unify Rear and Manufacturer.
I chose Red to match the body color, and I am satisfied with the ideal color.
I feel it will protect the Front fork in the event of a fall.
Was the one you received as per Image?
I feel it is good without being too conspicuous.
Was the installation difficult?
A handling Instruction Manual is included, which describes the torque for tightening the fixed bolt, making installation easy.
How was your experience with it?
I thought it would be lighter than the BoltPierced Type ones,
The weight was there.
Plate tends to remain in the Axle Shaft when it is removed,
It takes a little time and effort.
[Included Parts:were they on?
A handling Instruction Manual was included in the package.
[Was there anything that disappointed you?
None in particular.
View detail
lightech frame slider
I purchased a frame slider to mount on R1.
I purchased it as a Lytech product.
It's good for shock absorption and I'm very satisfied with the design.
I think the quality is good and it's easy to install. I think it's good for decoration because there are parts that can add additional colors. -------------------------------------------------- -------- I bought a frame slider to be installed in Al -One. I bought it as a Litech product. It is also good for shock absorption and the design is so satisfying. The quality is good and it's easy to mount. There are parts that can add additional colors, so it seems to be good for decorating. Powered by Google Translator
View detail
Rytech Coloring
I purchased it as an option for the frame slider to be mounted on the R-One. You can add coloring to the inside of the slider, which is great for decorating your own bike.
The price was discounted so I bought it cheaply.
I am satisfied with the product quality and that it matches well with the bike. -------------------------------------------------- -------- Purchased as an option in the frame slider to be installed in Al -One. Coloring can be put inside the slider, so it was good to decorate your own bike. The price was also discounted and I bought it cheaply. The quality of the product is also satisfactory and it goes well with the bike. Powered by Google Translator
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI KATANA
Rear one place was loose.
Rear parts were loose. The rear parts were loose, so they were adjusted by Seam. View detail
Fits: DUCATI MONSTER 1200, DUCATI STREETFIGHTER 1098, DUCATI MONSTER 1200 S, DUCATI MONSTER 1200 R, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821, DUCATI HYPERMOTARD 950, DUCATI HYPERMOTARD 950 SP, DUCATI HYPERMOTARD 939, DUCATI HYPERMOTARD 821
Simple
I installed Lightech front wheel axle slider on Ducati StreetFighter 1098 with aluminum adaptors include. The installation is simple, nylon slider body is a bit slim compared to another axle slider such as SW motech. View detail
It actually works!
I recently fell over on a Curve on a mountain road, and it is true that when I fell over Shock Absorption/Motorcycle Damage Mitigation I think it was effective for the
---According to the product description, "The patented five-part structure (unlike the one-piece molded type) provides excellent shock absorption and vibration resistance, and the slider part is made of NylonMaterial.:Plastic, enhancing the Slide effect in the event of a fall."---
He said
View detail
Purchase due to excessive Frame heat.
Purchased for a 2012 s1000rr.
There was no floating of the frame cover, which I was worried about, and I was able to pimp it with double-sided tape.
Before I installed the Frame, it was so hot that my thighs felt red from the heat, but after I installed it, I did not feel anything.
View detail
There is a sense of quality
To match the color of the Motorcycle, the Shock absorber on the Slider is also Blue. View detail
Beautiful Blue.
To match the color of the motorcycle, the rings on the sliders are also blue.
I am satisfied with the beautiful Blue color.
View detail
more than expected
Installed with no problems. It looks better than expected and I am satisfied. View detail
Fits: TRIUMPH STREET TRIPLE 765 S, TRIUMPH STREET TRIPLE 765 R, TRIUMPH STREET TRIPLE 765 RS, TRIUMPH STREET TRIPLE 675, TRIUMPH STREET TRIPLE 675 R
A charm to protect you from standing up.
The name is Frame Slider, and as the name suggests, it is attached to the frame at a single point, while OEMOP offers Engine Slider, which is attached to the frame and engine at two points. The OEMOP has an engine slider that is fixed to the frame and the engine at two points. The damage to the vehicle body in the event of a fall while driving is likely to be less with the two-point slider, since the impact is dispersed.
This time, we were looking for a car that would have as little contact with the road surface as possible when standing on the ground.
The blinker of StoBirdRS is so protruding that it might break off immediately if it is stooped over. But I couldn't find any type of blinker that would cover that much.
There were other Sliders and Guards that had more than 2 stops, but I didn't like the design, even though they were all in the wrong place.
So, after much deliberation, we decided on this product.
It is only a good luck charm for standing up. I don't know how effective it is and I don't know the cosmetics because it is something I would prefer not to try.
It looks and feels like it will protect the Body well from standing up and rubbing.
Since they are not dress-up parts, they are understated and blend in with the car body without any sense of discomfort.
Even functional parts have to look good.
View detail
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10RR, KAWASAKI ZX-10R SE
Rear sliderGreen color
I like Rai TEC products and use them in various areas.
Anyway, it looks beautiful and has a high dress-up effect.
I bought an additional Rear slider because there was no Rear slider in the Birdock Star product line.
Each part is Green color, which gives a sense of unity.
View detail
LighTech Frame Slider
Quality of item looks good and feels sturdy. Shipping was fast and efficient and carefully packed with bubblebag for safe handling. Overall, i'm happy with the product. View detail
If you look closely, you'll see a lot of Wound.
I purchased the glossy Carbon.
The shape was fine, but there were many disappointments such as WOUND on the surface, dirt and unevenness.
It is not noticeable, but it is still bothersome when viewed up close.
I don't think I will buy Carbon stuff from this Manufacturer next time.
I am not satisfied, but okay.
View detail
There is a dress-up effect.
I would have appreciated it if the OEMCarbon was described in the product description as it is a twill weave.
I think the product itself is good and the fitting is not that bad, although I guess it is plain weave because of its thinness and strength.
The BigFrame type requires removing the Hose, Canister, and other parts, so if you are looking for ease, the SSK type is easy. The lower part of the frame is hidden from view once the cowl is attached.
View detail
Aprilia RS660 Wheel Axle Slider
Gold was selected for Slider's Cover.
I like it as One point of Motorcycle.
Front inverted CB400T is also very match because it is Gold.
View detail
Lightech Front wheel Axle Slider
Easy to install
Satisfying to look at.
However, the AxleBolt will be replaced with plastic, and I'm not sure if the Large is strong enough.
View detail
Just in case.
I bought this product so that I would have less damage in case of a fall.
As it is a foreign car, there are few exclusive designs, so we chose one from the same Italian manufacturer.
I chose Red for the color, and it matches the Black body color.
If the color doesn't match, it's nice to know that you can buy the color only.
The front wheel is connected to the shaft with a screw through the shaft hole.
For the rear wheel, the bracket that expands when tightened is fitted into the shaft hole and both sides are mounted separately. (Similar to Universal's Handlebar installation)
The price of the front and rear set was less than 10,000 yen, which was one of the reasons I decided to go with it.
View detail