Reviews
Fits: TRIUMPH Thruxton R, TRIUMPH Bonneville Bobber, TRIUMPH Bonneville Speedmaster, TRIUMPH Street Twin, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120, TRIUMPH Bonneville T100 Black, TRIUMPH Bonneville T100, TRIUMPH Thruxton, TRIUMPH Speed Twin 1200, TRIUMPH Speed Twin 900
Compact.
Installed in my wife's car 。 He has never had to stand up and walk away before, but he said he feels uneasy without it. 。 We selected Engine Guard with a sturdy-looking three-point stopper to support the vehicle body and protect the legs in the event of a fall.
Color in the picture on the Product Page:It looked Gray, but it is actually Black as the description says! 。 It is inconspicuous in the black of the vehicle body, but when you stand astride the Motorcycle, it sticks out just enough to ensure that you can cover your knees, giving you a sense of security. 。 Although quite pricey, the sturdy-looking Pipe is painted Beauty and has a convincing texture.
I had it installed at the shop when I took delivery of my new Motorcycle, because I didn't want to damage it! 。 One of the lower of the two front locations bolted to the car body and the Quantity after the Engine.:Pair (for Left and Right) I am confident that if I had installed it myself, I would have added a Wound somewhere in the one place where the two are connected.
View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
Wow that's cool
Was the one you received as per Image?
It looks really good on the SV, so much so that it looks OEM.
Was the installation difficult?
I pulled out the existing Bolt and installed it, but the picture in the Manual was confusing and I pulled out a different Bolt.
I thought it would be a good idea to check Net for photos of the installed condition before the work is done.
How was your experience with it?
I had to slowly let the Left Side fall to the ground at home,
Clutch lever and Bar End are scratched, but Shift Pedal is intact. If it is a standing fire type, it is surely effective.
[Included Parts:were they on?
neither too much nor too little
[Was there anything that disappointed you?
None at all.
[Opinions and requests to Manufacturer
Please publish the Color code. I want to paint the scratches with the correct color.
View detail
Tank Guard HEPCO & BECKER:Hepco & Becker
The Bolt holes are perfect and the precision and texture are good. View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure
I can stop it without worry.
Surprisingly Large, easy to install, and can be unthinned and STAND. View detail
Be prepared for the "what if?
I don't think it is strong enough to withstand Gymkhana, but it seems to guard Body and Engine well in case of a standing fall or a minor fall. It looks stylish and I am glad I installed it. View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
These are the Items I wanted!
I have been wanting these Items for a long time.
The installation is only to fasten Bolt, but since it is where the Engine is fixed, it requires force to loosen it, and it is also dangerous if it is not fixed Firmly.
It will look a bit lumpy after installation, but that is a sign that it is protected, so it looks cool.
It is reassuring to know that Guard is there to help in an emergency.
View detail
Fits: KAWASAKI Z650RS, KAWASAKI Versys-X 250, KAWASAKI Z900 RS Cafe, KAWASAKI Z900 RS, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI Z900, KAWASAKI Versys-X 300, KAWASAKI Versys 1000, KAWASAKI Versys 1000, KAWASAKI Z650, KAWASAKI Versys 1000, KAWASAKI ZX-6R, KAWASAKI Ninja 1000 SX, KAWASAKI Versys 1000S, KAWASAKI Versys 1000SE, KAWASAKI Ninja1000 (Z1000SX, KAWASAKI Ninja1000 (Z1000SX
This will give you peace of mind.
Touring on a hot day was always on my mind.
That solves it, no more digging into the road surface!
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Standstill protection-Engine Guard
[How is it used?
RnineT is for a low center of gravity, so I knew it would be hard to stand and jostle, but I installed it just in case.
It's been six months since the car was delivered and we haven't had to take care of it yet. (⌒∇⌒)
Was the one you received as per Image?
We had the standard item from Dealer installed as is.
I was worried about the one from rizoma, but this one seemed to be more firmly guarded around the head.
I had this installed because I had the actual product.
I was not particularly concerned about Engine Guard.
Was the installation difficult?
I asked the Dealer at the time of delivery, so the degree of difficulty is unknown.
Probably, it should be Bolt On because it is a vehicle-specific product.
How was your experience with it?
Luckily, we have not been taken care of yet.
But this bar has more to offer than just serving as an Engine Guard.
I've seen people use it as a Mount for Fog light and ActionCamera.
There may be times when you use it that way….
[Included Parts:were they on?
I don't think there was any problem.
The optional Wonderlic ProtectionPad for Engine Guard/Tank Guard (item no. W35833-002) can be installed.
[Was there anything that disappointed you?
This does not mean that they are disappointing, but they do look a little stiffer.
That is cool, so I guess it is a preference.
I am planning to install an Under Cowl in the future, and I am wondering if I should remove the Engine Guard at that time, or keep the Engine Guard installed and install the Under Cowl. (I heard there is such an Under Cowl. I'm searching for more information now.)
View detail
Fits: KAWASAKI Z650RS, KAWASAKI Versys-X 250, KAWASAKI Z900 RS Cafe, KAWASAKI Z900 RS, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI ER-6n, KAWASAKI ER-6f, KAWASAKI Z900, KAWASAKI Versys-X 300, KAWASAKI Versys 1000, KAWASAKI Versys 1000, KAWASAKI Z650, KAWASAKI Versys 1000, KAWASAKI ZX-6R, KAWASAKI Ninja 1000 SX, KAWASAKI Versys 1000S, KAWASAKI Versys 1000SE, KAWASAKI Ninja1000 (Z1000SX, KAWASAKI Ninja1000 (Z1000SX
it's recommended
I was concerned about interference with the OEM Exhaust System, but the Large was sturdy. The slanted base also gives a sense of security in grounding. Although it looks good and is expensive, I am satisfied with Large and recommend it. View detail
Fits: SUZUKI SV650 X, SUZUKI SV650, SUZUKI SFV650 Gladius
Sufficient protection.
The car was immediately damaged by a standing fire (Right Side) 3 days after delivery, but other than the Engine Guard, the damage was limited to the lower end of the Exhaust System Heat Guard, the Bar End, and the tip of the Mirror being slightly scraped off. The painted surfaces are just scratches that are not noticeable with a touch pan.
I'd like to avoid moss as much as possible in the future, but it's a good thing to know where I'm going before I fall.
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
Good thing I left it on.
Since I had the dealer install it when I purchased the vehicle, I won't give an evaluation of the installability.
First, the appearance.
The car has a lot of black parts including the frame, and the black engine guard grows out of the black frame, so it doesn't feel unnatural even if it is covered with a silver colored Hend Cover.
And the important thing is that the protection is godly!
Quantity of so-called "standing moss" on a public road:Pair (for Left and Right) I defeated each of them once, and almost all of them had no damage except for the Engine Guard.
(This is only our experience. The results may have been different depending on how and where you fell)
When I tipped it to the Right, I had the Tandem Footpeg out, so the Wound was in the tip of the footpeg. If I had stored it, it would not have grounded.
Quantity in low position:Pair (for Left and Right) The end of the handlebar extends to the top of the handlebar, so the end of the handlebar won't be grounded by a mishap.
Therefore, it is easy to wake them up.
For the repair, I roughly dipped the paper file in it, blended it in, and painted it black with Touch pan.
It is recommended to wear it if you are not sure about your footing or leg strength.
View detail
This is my lifeline.
The vehicle weighs more than 100kg heavier than conventional motorcycles, which may cause the vehicle to bog down at low speeds or when handling it by hand.
We're about to reach double digits, and thanks to these Parts, Cowl is almost scratch free!
Not even my leg got caught! It sends a thin chill down my spine to think of how much damage I would have suffered without it.
As you can see, I can't protect the exhaust system's SmallWound, clutch pedal, rear brake pedal, etc.
There was no Damage until it affected self-running.
I think most people who buy this motorcycle will enjoy long distance touring.
When you are experiencing a significant increase and fatigue, you may find yourself standing up unexpectedly.
I think there is.
The scary thing about long-distance touring is that you may not be able to drive yourself.
You may want to consider buying one to lower your Damage.
I'm not sure what would happen if I fell while driving;
View detail
Fits: BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT
2021 rninet.
I wasn't sure if I could install it on my '21 rninet, but I did.
Compact, discreet and solid compared to OEM.
I think it is better to do the installation work by two people as much as possible.
You will need someone to hold the Wrench on the One Side when you tighten the Bolt at the top.
You will also need a screw lock and a T55 Torque that can be removed.
Apply a small amount to the tightening bolt at the bottom and tighten, as the vibration may loosen the bolt.
I installed it by myself, but it was Large strange not to put Wound on Engine etc.
View detail
Fits: YAMAHA MT-09, YAMAHA Tracer9, YAMAHA Tracer9 GT, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA Tracer 9 GT, YAMAHA Tracer 9, YAMAHA XSR900
Safe parking in gravel parking lots, etc.
If it is STAND of NORMAL, there is a fear that it will fall down in the parking lot of gravel. Because it is troublesome to look for a stone every time, I bought this. Because there was an instruction of the screw lock agent (medium strength) in Instruction Manual, I applied it and tightened it.
After the Stand End is installed, the car body will be raised lightly, but it is almost the level that is not bothered. I used to have HEPCO Stand End on another car, but it didn't fall down.
It's quite safe and I recommend it.
The tools you need are 3mm hex Wrench and Screw locker.
If you are used to raising the vehicle, you can do it from the left side by yourself, but if you are not sure, you can do it with two people or with maintenanceSTAND.
It is necessary to buy a special one for 21MODEL.
View detail
I installed the Engine Guard and took it down. GSX-S125]
https://youtu.be/VqFreRzr1to
Engine Guard installed:https://amzn.to/3sWRcNO
Hepco & Becker I installed Motorcycle's Engine Guard for the first time because I was afraid of tipping over.
This is a husband and wife Moto blog.
Because my wife wants to ride GSX-125, I installed it by the fall of the day when I ride it by moped 2 class Touring someday, and the countermeasure against a standing fall.
It was my first Custom and it works. I recommend it.
View detail
Fits: HONDA Forza 750, HONDA Crosstourer, HONDA X-ADV, HONDA NC750X, HONDA NC750DCT
It is a solid making
I installed it on my NC750X's unreliable Side Stand. The slope of the stand also rises slightly and it is easy to handle. View detail
Fits: TRIUMPH Tiger900 GT, TRIUMPH Tiger900, TRIUMPH Tiger900 Rally, TRIUMPH Tiger900 Pro, TRIUMPH Tiger850 Sport, TRIUMPH Tiger 900GT Pro, TRIUMPH Tiger 900GT, TRIUMPH Tiger 900 Rally Pro, TRIUMPH Tiger 900 Rally, TRIUMPH Tiger 900
nice parts
Easy to install and good to looking ! but if you buy it you need to wait two month to received. View detail
Fits: SUZUKI DL650 V-Strom, SUZUKI V-Strom650, SUZUKI V-Strom650 L2, SUZUKI V-Strom650 XT, SUZUKI V-Strom650XT
Can be used with OEMCenter Stand
At first, I bought a Chinese extension that was the same color as the car body and was inexpensive. It was no problem to use it alone, but it interfered with the OEM Center Stand. It was fine to raise and lower the Center Stand with the Side Stand down, but if the order was reversed, the Side Stand End caught the Center Stand and it was no good. The shape of the end plate was not good.
So I bought this Extension again. This time, no matter in what order I raise and lower it, it does not interfere, and it became easy to use Large strange. I used it on a non-paved road a few times, but it supported the weight of the car enough and the Side Stand did not sink into the ground.
I have bought several Made In GERMANY Parts, and all of them including this one were don't miss accuracy. Therefore, it is a push for the car with OEM Center Stand. The Center Stand of H&B will probably be Large and strong. The price was a little high, but I should have made this from the beginning.
View detail
It's quite authentic.
I bought and installed this product just in case my motorcycle had been knocked over in the past and was covered in scratches.
The installation is quite Large strange. But it works well.
good point
The body of the car almost collapsed in the earthquake, but it was safe.
This product is designed not only to protect the engine, but also to prevent the rider's foot from getting caught in the hanger when falling.
Very sturdy.
The body of the car will be stable.
A bad point
Installation is troublesome.
Unlike a car, a motorcycle has two tires, so falls are inevitable, and of course you need to be careful, but you also need to be prepared for accidents. These parts can protect both the vehicle and the rider.
I was really sad when Motorcycle was knocked down in the past, I don't want to experience that again.
Just in case.
View detail
Fits: YAMAHA Tracer 900, YAMAHA Tracer 900 GT, YAMAHA MT-09 Tracer
Rugged Tough Image
We are using this on my father-in-law's 2017 ToRacer. Actually, he had this on one of the 092 mt's we owned before, as it was a STREETRALLY 50 Spec. It looks great on my father-in-law's ToRacer. It is very Race ish and sturdy construction. The only drawback is that it gets in the way when you hang off. View detail