Reviews
Although the engine slider was used, it was decided at this by appearance that he wanted to protect a crank cover. Even though the cover did not have a crack at the stand and according to KOKE and counterclockwise twining lump accident fall of 2 times
Although the engine slider was used, it was decided at this by appearance that he wanted to protect a crank cover.
Even though the cover did not have a crack at the stand and according to KOKE and counterclockwise twining lump accident fall of 2 times as for GSX1400 of a predecessor vehicle, appearance was somehow repaired with a merciless crack, a file cliff, and buffing, but the problem remained in thickness.
after the predecessor vehicle disappearance by arson -- said -- reviving No. 2 -- the time -- next time -- important -- riding -- a sake -- this -- having carried out .
Although the attachment which carries out engine mount bolt removal may be sufficient as a wearing feeling, its bolt by the side of exhaust is long, and it is not a stainless.
Moreover, although a rubber spacer is good between covers, it is not quite satisfactory that between frames opens about 1 cm.
I lost the crevice with the urethane rubber tape.
Since it has not failed to get off the ground yet, reinforcement is not known, but appearance is said to mind.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
Although there is also a swing arm cause of right-and-left asymmetry and the lift was carried out in the very unstable state, he felt easy dramatically by attaching a hook bolt, and lift up became possible. Moreover, a color also thinks that it can ch
Although there is also a swing arm cause of right-and-left asymmetry and the lift was carried out in the very unstable state, he felt easy dramatically by attaching a hook bolt, and lift up became possible.
Moreover, a color also thinks that it can choose the color united with the car body with several colors.
Not only a function surface but the little dress-up of axle part up was completed.
I think that anyone can attach by bolt on if a swing arm has a mounting hole.
View detail
Fits: SUZUKI , TRIUMPH DAYTONA675, KAWASAKI NINJA400, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX6R, KAWASAKI ninja, KAWASAKI ZX10R, KAWASAKI Z400, KAWASAKI Z800, KAWASAKI Z250, KAWASAKI Z1000, HONDA , KAWASAKI Ninja 1000SX, DUCATI Late 999, BMW S1000RR, DUCATI 749, BMW S1000R
the manufacturer who had equipped the motorcycle which had ridden before although cbr600rr was equipped -- compared with the unknown thing, accuracy and appearance were good and quite good. these components itself -- although it can equip easily, I di
the manufacturer who had equipped the motorcycle which had ridden before although cbr600rr was equipped -- compared with the unknown thing, accuracy and appearance were good and quite good.
these components itself -- although it can equip easily, I did not think changing so far with manufacturers.
It is recommended.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
It is not a thing of only other manufacturers' duracon, and texture is high and very much satisfied with the elaborate structure which is putting in the color of aluminum between duracons. [ car-body side ]
It is not a thing of only other manufacturers' duracon, and texture is high and very much satisfied with the elaborate structure which is putting in the color of aluminum between duracons. [ car-body side ] View detail
It attached to 09. After attachment, it has got used with the color of the frame and is not uncomfortable. Attachment is likely to carry out comfort of the motorcycle life, without damaging to a slider, since it purchased with the intention of ins
It attached to 09.
After attachment, it has got used with the color of the frame and is not uncomfortable.
Attachment is likely to carry out comfort of the motorcycle life, without damaging to a slider, since it purchased with the intention of insurance although carried out, is peevish, and ~.
View detail
Since there was only the zephyr chi in a catalogue, I would like to carry out impression here, although the object for the zephyrs 400 was before purchased from webike. Although appearance and reinforcement of comment were wonderful, since he had a st
Since there was only the zephyr chi in a catalogue, I would like to carry out impression here, although the object for the zephyrs 400 was before purchased from webike.
Although appearance and reinforcement of comment were wonderful, since he had a strange feeling with the angle to see, * was set to four.
View detail
It purchases as insurance so that it may stand and may end owing to the minimum damage at the time of GOKE. Since there was no manufacturer stock, it took brief time. -- It is although I think that attaching this product goes into an easy category. --
It purchases as insurance so that it may stand and may end owing to the minimum damage at the time of GOKE.
Since there was no manufacturer stock, it took brief time. -- It is although I think that attaching this product goes into an easy category. -- It is useless if there is no anyway orderly tool (14 mm of glasses wrench deep socket RAJIETTO extension).
If it works with a spanner (thing with low accuracy), the head of a screw may be licked and it may become although it flies, there is nothing.
The screw of the main part engine mount of a motorcycle.
Dramatically.
If a deep socket with a glasses wrench or high accuracy is not used since it has kept with strong torque, the head of a screw will lick thoroughly. -- It is dramatically troublesome if it becomes so. -- To the kit corresponding to a model for CB1300SF and 08~09 years Radiator hose.
The engine mount components processed so that it might not interfere are attached.
This was dramatically good.
I think that it can attach satisfactorily if it is Ho with the orderly tool.
It is recommended.
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
It attached to GSX-1300R peregrine falcon. First, it was charmed by an established reputation called a yoshimura and the design, and decided. Although I chose silver, since it seemed that it rubs inevitably and surface paint application came off w
It attached to GSX-1300R peregrine falcon.
First, it was charmed by an established reputation called a yoshimura and the design, and decided.
Although I chose silver, since it seemed that it rubs inevitably and surface paint application came off when the friend had attached other colors and hung maintenance stands, silver was used.
Attachment is also easy and, as for appearance, a simple and casualness are expressed.
When maintenance stands are used frequently, the worn inconspicuous silver is a recommend! Since it is introducing by my HP in detail, please have a look.
wind of shirobusa http://www.k4.dion.ne.jp/~nori-99/J-TRIP.html
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
The address V125 was equipped. It was used for the aluminum billet plate which is the silencer stay of the steiner muffler made from p's supply as a decoration color. They are the product here and the product presented by the friend. . .
The address V125 was equipped.
It was used for the aluminum billet plate which is the silencer stay of the steiner muffler made from p's supply as a decoration color.
They are the product here and the product presented by the friend.
.
.
Although the original purpose of use was different wearing, the improvement in appearance was conspicuous!! An attached image becomes the contents.
.
.
Incidentally.
.
.
The bearing surface diameter of an upper base of the product here is phi26mm.
Height is 25 mm.
Rather than the existing bolt, the bottom length of a bolt head which formed 15-mm long becomes a suitable size.
We equipped using the product cap bolt made from a stainless, and M8x55!! Postscript.
Blue alumite of the product here.
.
.
in practice, the color of a medium blue tone -- it is clever.
(It is very beautiful it is blue in a color like [ it is thinner than blue, and a light blue is also deep, and ] the clear blue sky !!) According to a device, I am parts with which it can equip at any cost, and consider [ that it can be used also as decoration parts also as functional parts, and ].
If it is a part of cap bolt use of M8 size, it is a showplace of your sense!!
View detail
Since a motorcycle and the body suit about twice the accident which carries out a grievous injury after equipping with a skid pad, I would like to carry out in play of that time. Of course, a skid pad is a new article in both cases. - The 1st time
Since a motorcycle and the body suit about twice the accident which carries out a grievous injury after equipping with a skid pad, I would like to carry out in play of that time.
Of course, a skid pad is a new article in both cases.
- The 1st time : in the case of the left corner of a speed range low peak, a skid pad and a tandem step serve as a fulcrum, and a slip down -> motorcycle collides with -> concrete wall which is smoothly slippery. Although sheathing was almost unhurt in this case, the seat rail bent with the impact of the collision (repair cost of 50,000 yen).
- 2time: -- in the case of the right corner of the peak, also while sliding, there is no slip down -> motorcycle, returns to a guardrail in the collision -> from a tire, and bumps into me (a hole opens in a lung --)
A whole body blow and bloody urine What the skid pad did is not having made a ground surface and a guardrail ground a tank and an engine in this case.
However, the seat rail bent with the impact again, the frame under a tank bent, and the circumference of a front guide peg dented OSHAKA and a rear wheel.
(It is a disused car) He used it twice and was surprised at the figure on which the motorcycle equipped with a skid pad slides.
It is too smooth.
For this reason, while the speed of the fallen motorcycle is not killed, it collides with a wall etc., and I think that that impact is great.
The skid pad becomes less effective [ if it stands and a GOKE grade becomes, it is effective, but ], so that a speed when falling over is high.
Leave and attack a margin at a peak just because you equipped with the skid pad how much.
This is my conclusion.
View detail
Fits: KAWASAKI BALIUSI, KAWASAKI XANTHUS, KAWASAKI ZEPHYR400 χ, KAWASAKI ZXR750, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZX-7RR, KAWASAKI ZRX400, KAWASAKI ZX-7R, KAWASAKI , KAWASAKI , KAWASAKI Zephyr χ, KAWASAKI ZRX400, KAWASAKI ZX-7R, KAWASAKI ZX-7RR, KAWASAKI ZXR250, KAWASAKI ZXR400, KAWASAKI ZXR750, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Varios I
He would like to consider a future motorcycle life and to carry out lift up with V character receptacle, and it is the purchase of a stand and a hook bolt.
He would like to consider a future motorcycle life and to carry out lift up with V character receptacle, and it is the purchase of a stand and a hook bolt. View detail
![Billet Side Stand/Series [Long Type]](https://img.webike-cdn.net/catalogue/images/2341/74_0073_image-1_TS.jpg)
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Pigeon thought purchase was carried out from the iron castings of normal. Although the product level was good, it was not able to be used where a center stand is attached. Since the replace from normal was considered, I wanted you to specify that
Pigeon thought purchase was carried out from the iron castings of normal.
Although the product level was good, it was not able to be used where a center stand is attached.
Since the replace from normal was considered, I wanted you to specify that combined use with a center stand is improper.
View detail
Fits: HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100, HONDA Ape 100 Type D, HONDA Ape Type D, HONDA XR50 Motard, HONDA XR100 Motard, HONDA NSR Mini, HONDA NSF100
The guard function has not been proved yet... I do not want to carry out if possible. Attachment is easy. Feeling which rigidity went up?
The guard function has not been proved yet... I do not want to carry out if possible.
Attachment is easy.
Feeling which rigidity went up?
View detail
Fits: YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R
Although the twist which the engine performance is not known if it does not fall over, but is not attached is attached by ! in which it is better to attach and a shaft is made to penetrate in the case of attachment .. It is a little short. bolt length
Although the twist which the engine performance is not known if it does not fall over, but is not attached is attached by ! in which it is better to attach and a shaft is made to penetrate in the case of attachment .. It is a little short.
bolt length thinks last-minute ~ -- * -- it is three.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
It fell at last after slider wearing the other day. Except [ to the left-hand side by the axel sudden open one ] the ability to have deleted the axle slider and hand guard of RIA although it opened and was GOKE, even the mirror and the shroud were unh
It fell at last after slider wearing the other day.
Except [ to the left-hand side by the axel sudden open one ] the ability to have deleted the axle slider and hand guard of RIA although it opened and was GOKE, even the mirror and the shroud were unhurt and it was surprised.
Although the car body might be damaged depending on how to fail to get off the ground truly, the effect of the first slider to be useful was greatest.
As look before you leap, it is a recommend absolutely in the direction of un-falling.
View detail
![[IDEAL] Engine Slider](https://global.webike-cdn.net/photo/article/32/1243240260132L.jpg)
It is look before you leap clearly. Although attachment is very easy, since it is putting in the skid plate in my case, it is cutting and using the portion which contacts. saying [ a little expensive kana ? ] -- * -- it is three.
It is look before you leap clearly.
Although attachment is very easy, since it is putting in the skid plate in my case, it is cutting and using the portion which contacts.
saying [ a little expensive kana ? ] -- * -- it is three.
View detail
Compared with a pure engine guard, it is stylish, and a parenthesis is good! Although it becomes high, it is a recommend and peevish, and structure is also solid, and a price is likely to protect an engine perfectly.
Compared with a pure engine guard, it is stylish, and a parenthesis is good! Although it becomes high, it is a recommend and peevish, and structure is also solid, and a price is likely to protect an engine perfectly. View detail
It attached to the ape 100. Although a pure stand holder will be lost by back step-ization and a stand will be attached to the engine lower part, since there was a short type of an adjustment stand when searching, since it needed to be made the quite
It attached to the ape 100.
Although a pure stand holder will be lost by back step-ization and a stand will be attached to the engine lower part, since there was a short type of an adjustment stand when searching, since it needed to be made the quite short stand, this was decided on.
That it is pleasing first falls in love with this form like the hoof of a form and a horse at first sight! Moreover, it is aluminum! It was putting into the shopping basket at the moment of seeing.
I think that it was a five stars when the price was cheap now, but he bought it also with ... (I think that it is unavoidable since it is a product made from aluminum in an adjustment type), and it was a correct answer.
View detail
The image of the whole motorcycle is not broken but it is the design highest.
The image of the whole motorcycle is not broken but it is the design highest. View detail
Fits: HONDA XR250, HONDA XR250 Baja, HONDA XR250MOTARD, HONDA CRF250M, HONDA CRF250L
It searched to search. It investigated to investigation. It can attach also with what and CRF50!! It is tight to the attachment width currently recommended by sprocket guard attachment processing therefore set up as the option of the swing arm in
It searched to search.
It investigated to investigation.
It can attach also with what and CRF50!! It is tight to the attachment width currently recommended by sprocket guard attachment processing therefore set up as the option of the swing arm in G Kula.
I think that it probably becomes a future fashion.
Incidentally attachment of a photograph is a 12-inch wheel in the swing arm for apes.
In 10-inch attachment, although a guard is likely to say even Ho of a tire, if it is Ho who can manage the air pressure of a tire just, there seems to be no problem.
A super-recommend!!
View detail