Reviews
Perfect appearance
I'm not mocking it up,
Effectiveness is unknown,
It is better to think of it as a dress-up,
And to think,
I think the price is high.
View detail
Better than nothing, installation hassle
The Female Screw side did not fit as expected, and I measured it with Caliper. 0.5 millimeter. I managed to insert it by shaving the average thickness with Belt Thunder.
Personally, I think Other Brand Product is the way to go!
View detail
Fits: TRIUMPH DAYTONA675, KAWASAKI NINJA400, SUZUKI , KAWASAKI ZX6R, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI ZX10R, KAWASAKI Z800, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Ninja 1000SX, KAWASAKI ninja, DUCATI Late 999, HONDA , DUCATI 749, BMW S1000R, BMW S1000RR
good
Since it is the same Manufacturer as STAND.
Because it is not as flashy as other Manufacturers.
View detail
Fits: HUSQVARNA TE250, HUSQVARNA TE300, GASGAS EC250, GASGAS EC300
No instruction manual ??
There is no instruction manual... I just kind of put it on as it was supposed to be put on, but I have thought about the under plate, but why? I have a Clip nut, but I'm not sure if it is used in the right place.
At any rate, it looks like it's going well, so I'll enjoy it!
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000 GT
I'll never roll over …
I'm going to install it with the idea that it will look a little better before it falls down. View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI KATANA, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F
I'll never roll over …
I don't want to be in the care of this guy. View detail
Was there a change in the shape of the Cover in response to the 23-year MODELorRecall?
The shape of the Right Side, in particular, does not fit the shape of the Right Side, but I cannot determine if this is a product error, a change from the 23-year model, or a change in response to a recall.
The gapping is within the range that can be handled by the order of screws to be installed, the procedure, and the power.
View detail
Lightness and thickness are good
[How is it used?
For defensive power up from daily use to forest roads
Was the one you received as per Image?
It is thicker and lighter than I expected.
Was the installation difficult?
Material:One of the four screw holes was installed too forcibly.
Instruction manuals are fine in Illustration only with understandable expressions.
How was your experience with it?
I personally think that Coloring to Match the Red body.
The holes at the bottom are not Drain, so of course they don't fit.
[Included Parts:were they on?
No excesses or deficiencies. If possible, I would like two Stickers for both SIDES.
[Was there anything that disappointed you?
It is not a disappointment, but it may require more power for installation as the slight distortion may have a large effect due to the firm cover to the engine.
View detail
Fits: YAMAHA MT-10, YAMAHA YZF-R1, BMW S1000RR, HONDA CBR1000RR, BMW S1000R
Easy detachment!
Rather than a rear slider, the Axle Shaft was installed to make it easier to attach and detach the Axle Shaft.
It can be used as a handle like Doorknob when pulling out shafts, and when inserting shafts, the triangular pyramid shape makes it easy to insert the color, etc. without resistance.
Of course, it would also serve as a Slider, but currently it is benefiting from the detachment process.
View detail
The smallest possible protection without compromising appearance
You won't know performance until you mock it up. View detail
Fits: DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 1199, DUCATI PANIGALE 1199 S, DUCATI PANIGALE 1199 R, DUCATI SUPERLEGGERA 1199, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI STREETFIGHTER V4 S, DUCATI PANIGALE V4, DUCATI PANIGALE V4 S, DUCATI PANIGALE V4 R, DUCATI PANIGALE V4 SP, DUCATI STREETFIGHTER V4
A walking stick before you fall3
[How is it used?
We chose this product because we wanted to protect the Swing Arm.
I chose Red to match the body color and am satisfied with the color, which is ideal.
Was the one you received as per Image?
Swing Arm is more overhanging,
Protection is not complete.
Was the installation difficult?
A handling Instruction Manual is included, which describes the torque for tightening the fixing bolt.
I'm not sure if mine was an outlier or not, because the Left Side Bolt length is too short,
Fixed parts had to be machined.
How was your experience with it?
Unlike the Front, it rotates with the Wheel,
Easy to loosen, Locktite was applied to the fixed Bolt.
[Included Parts:were they on?
A handling Instruction Manual was included in the package.
[Was there anything that disappointed you?
The key Swing Arm cannot be protected.
View detail
Not used
When disembarking crf250l md47 with a full load of luggage, the softness of the suspension makes it difficult to disembark in a vertical position.
I bought this product 25mm shorter, but now it seems to fall over when it is empty, not when it is loaded, but when it is tilted.
I did not use it, so I returned it to OEM. By the way, I also adjusted the suspension pre-road and made it stiffer.
There is a way to make Minus15mm by adding 10mmWasher, but it is still inclined,
I'm not sure about full/empty loads, so I'm under the impression that I shouldn't have bought it.
I think the product is robust and good.
View detail
In any case, it should be from a reliable Manufacturer.
To be honest, I could have chosen any stand hook, since all stand hooks are equal in performance, but I wanted to choose one made by a well-known and reliable manufacturer, so I decided to go with MORIWAKI. View detail
Side Stand of CT110 HUNTER CUBJA 65
Side Stand, to protect the bottom. View detail
It is what it is
[How is it used?
Fitted due to risk of falling due to paralysis of the left hemisphere
Was the one you received as per Image?
As per Image
Was the installation difficult?
Anyone with tools can do it,
How was your experience with it?
I don't know because I haven't fallen over, but it is designed to absorb shock in two stages so that the impact is not heard by the Frame.
[Included Parts:were they on?
Sticker is attached.
[Was there anything that disappointed you?
In the event of a fall, the SliderBody is likely to collide with the Silicon rubber before the shock-absorbing Silicon rubber.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT-25, YAMAHA MT-03
Stand Hook for easy lift up
Purchased for use with Racing Stand.
Compared to the Spool type, the Spool type does not protrude laterally and has a smaller Damage at the time of tipping.
The installation seems to be a hassle since the Type requires fine adjustment. The structure is such that it is likely to shift its position while being used.
It can be used without any problem in terms of feel. The texture is not bad.
View detail
You have to remove the shaft and install it.
The cap on the Right Side is clearly different in size from the Left Side and hits the GunGun so hard that it is impossible to install unless the front is raised and the shaft is pulled out. View detail
Not very well finished!
Waited for several weeks (Months), but disappointed with the finish!
There is 1 ventilation "scoop" right in the middle of the right and left piece with unclear, irregular contour cutting and lack of varnish on the cutting edge!
Dear, quite long delivery time, disappointed! But after paying the item price, shipping cost and import taxes! I will lose the amount of quite high import taxes! -------------------------------------------------- -------- Waited for several weeks (months), but disappointed with the finish! There are 1 "scoop" of ventilation in the middle of the right and left room with a clever, irregular contours cutting and gaps of varnish on the edge of cutting! Dear, fairly long, disappointed delivery time! But after the price of the item, paying shipping costs and import taxes! I will lose the amount of fairly high import taxes! Powered by Google Translator
View detail
Fits: SUZUKI GSX-8S, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI GSR750, SUZUKI V-Strom1000 XT ABS, SUZUKI V-Strom1000 ABS, SUZUKI V-Strom1000, SUZUKI V-Strom250, SUZUKI KATANA, SUZUKI SV650X, SUZUKI SV650, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX-R125, SUZUKI GSX-R125 ABS, SUZUKI GSX-S125
M10.
M10, but if you have a small one, buy it because YOSHIMURA is in the middle of unification, It is easy to install. View detail
Fits: KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-10R SE, KAWASAKI ZX-10RR, KAWASAKI ZX-6R, KAWASAKI ZX636
It also prevents damage in the event of a fall.
I changed to Racing Stand Hook in consideration of tipping over because of circuit driving.
You can use JTrip's STAND.
The color selected was Green Light because it is Kawasaki.
Color Matching is good.
View detail