Reviews
It is safe to say that both are held back by Shaft.
Quantity to Body:Pair (for Left and Right) If the model is installed separately, there is concern about damage to the crankcase in the event of a fall, but the Striker model makes good use of the extra white space above the engine to allow the shaft to pass through. The Striker model, however, uses the extra white part on the engine to pass through the shaft, so that the damage can be released even if the engine falls over.
As expected, we have not checked by intentionally tipping it over, but it seems that the cone protrudes out of the Cowl moderately well and seems to reduce Damage to the Cowl & Engine in a good way.
View detail
Repair
I am embarrassed to say that this is a replacement due to a standing blockage.
When ordering products, you can choose which Shop you would like to have installed.
After that, the installation process is completed with only a few email exchanges. As for the product, it is well packaged and I have nothing to say.
View detail
Slider
It did not take much time and the work was completed to our satisfaction.
I love it
View detail
Just in case
[How is it used?
From city driving to touring, in case of a fall
Was the one you received as per Image?
Street Image
Was the installation difficult?
No problems at all. Installed with ease.
How was your experience with it?
I don't want to test the effects.
[Included Parts:were they on?
Included Parts:None
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Anyway, Parenthesis is good.
I wanted a Slider using Carbon and bought it.
I am definitely satisfied!
It is easy to install, looks luxurious, and I recommend it.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-07, YAMAHA XSR700, YAMAHA YZF-R7
Good looks, good quality
We were going to use the Engine Guard from Company D, but were dissatisfied with the design and the quality of the mounting bolts, so we considered this product because we had previously used it on the MT-07.
The Black Anodized has a nice texture and I am satisfied with the quality of the Bolt.
Installation on XSR700 2022, but Blinker will not be able to protect Blinker since Blinker is more outside w
View detail
STRIKER Striker Guard Slider
[How is it used?
I bought it in January 2020 and am now replacing it with a babyfe.
Was the one you received as per Image?
It didn't fit with Image a bit.
Was the installation difficult?
It's very easy.
How was your experience with it?
Fortunately, we never had to take care of Frame Slider.
[Included Parts:were they on?
Instruction Manual
[Was there anything that disappointed you?
In the event of a fall, I was worried that the Frame would take the impact of the fall at one point, so I replaced it with a 3-point support BabyFe.
Other items that would be helpful
Tightening Torque is 49N and Torque as per service manual.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09SP, YAMAHA MT-09
Looks well made.
It is a well-known name, Striker, so the product seems solid.
The Bolt part is black, so it's a little bit expensive;
Tightening Torque is like 45N.
It was so low level that I thought, "Is this what it's supposed to be like? It was a Level that I would say "this is what it is like.
In the meantime, I painted 243 of Locktite.
I hope it will not be used because it is a talisman in case of moss.
Also, I wish the price was a little lower.
View detail
Ironclad StrikerSlider
The indispensable items when you are in a boreverke? View detail
Gorgeous looking and completed quality
real Carbon slider has more better hardness than normal product. therefore i could expect several positive effects by. in addition, it has very good looking! five stars for me. View detail
Fits: KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-25R
ExactlyFit、
Installation is also easy as it comes temporarily assembled and can be easily installed.:Pair (for Left and Right) Exact fit, accuracy, and dimensions are perfect for installation.
All black finish and a shade that blends in well with Fork is GOOD!
It's a rugged but chicly coming AxelSlider!
I hope it will help mitigate damage in the event of a fall.
View detail
_TS.jpg)
Fits: Others , KAWASAKI NINJA250 R, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Ninja ZX-25R, KAWASAKI NINJA250, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI NINJA400, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI NINJA250
Completely pull out the Axle Shaft from the car body and install it.
Replaced OEM rubber cover. The Axle Shaft needs to be completely removed from the car body and fixed to the car body again after installation. View detail
Fits: Others , KAWASAKI NINJA250 R, KAWASAKI NINJA250, KAWASAKI NINJA250, KAWASAKI NINJA400, KAWASAKI Ninja ZX-25R, KAWASAKI NINJA250, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI NINJA400, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-25R SE, KAWASAKI NINJA250
RearASKUL Department is Refreshing
It is necessary to remove the tire. The actual work is to fix the Rear tire with the Racing Stand, pull out the OEM Rear ASKUL once, install Striker's Parts, and put the Rear ASKUL back in the Quantity.:Set.
It was not necessary to completely isolate the Tire from the vehicle body.
In addition, it is necessary to pay attention not to tighten too strongly and not to loosen the tightening from day to day because the Slider itself is not the genus Gold.
View detail
Installed on CBR650R 2021 MODEL
I bought it to reduce scratches when I fall down.
Installation is easy because it is Bolt On.
I am satisfied with the quality of the product.
I don't want to feel the effects...
View detail
For ZEPHYR1100
I bought this because of a standing injury.
I have considered Slider from various Manufacturers.
I bought Striker's Engine slider because it has three slits and the word Striker on it is Parenthesis good.
I was troubled with Black Spec. but because my engine is Silver, I bought Standard Type which has Silver base.
The installation is still in progress, so I can't get a feel for it yet, but it's a manufacturer I trust, so I'm sure it'll be fine!
View detail
Hook and Quantity:I'm forced to buy in Set.
I feel that the cost is high because it is separate from Hook. View detail
It's a little pricey.
The price may be a little high, but I tried to match it with the Swing Arm of G-striker.
Needless to say, the quality is good and of course it functions well.
View detail
Shatterer body anti-fall
My car is Damao Honda's CBR1000RR. I bought this hitter's body drop-resistant on Webike. The material of this product is plastic steel. Although it is not very good-looking when it is installed on the body, the anti-fall of the car is not very good, but in order to avoid damaging the car shell when reversing on the spot, the anti-fall is still in place, and the fixing is through the three parts of the frame. It is fixed by a screw, and the force distribution is better. It is not the kind that a frame screw comes out directly. If the direction is not good, it will directly damage the frame, and this anti-fall will not. I will also recommend Wibaike platform to other friends, hoping that Wibaike products will be more and more, and the price will be more and more favorable. ---------------------------------------------- My car is a big trade Honda CBR1000RR, I bought this body drop resistance against those in the Webike. This product is made of steel, although the installed vehicle body drop resistance feeling is not very nice, but in place in order to avoid damage when reversing car shell, this place is very popular brands, and is fixed by a three-frame allocation screws fixed force is better, not the kind of a screw directly out of the frame, that fell to the ground if the direction is not good, it will directly damage the frame, but this does not drop resistance. I will recommend Viagra 100 passengers platform with other Friends of Mount hope Granville 100 passengers more and more goods, more and more price concessions. Powered by Google Translator View detail
Cool
I installed it on my 21 year old CBR650R. (Spec.:All black)
Installation is very easy, just remove and replace the existing Bolt.
I wanted to buy Babyface, but it takes time to deliver, so I chose here.
When I installed it, it is very nice and Parenthesis is good.
As for the one made by Babyface, there are several fixed Bolt, and I thought that this one was simple and good.
I don't know the actual effect yet, but I still feel safe.
View detail
I guess I'm starting to feel like an actor.
Black and inconspicuous, but subtle and nice.
It was easy to install.
View detail