Reviews
A lowered bike needs this stand.
This stand is better than the aftermarket stand I purchased after lowering my bike. This stand was compatible with the switch that turns off the engine when I deploy the stand. The lean angle gives me comfort that the bike will not fall over in either direction. View detail
LOOKS GORGEOUS and ATTRACTIVE
I PURCHASE THIS PRODUCT FROM WEBIKE TO REPLACE MY RUSTY LOOKING SIDE STAND OEM SPRING. FIRST I THOUGHT IT WAS EASY AND LOOKS MATCH FOR MY TDUB SIDE STAND .I have no idea but placed an order anyway.after I got the package I try to replace the stainless steel spring but it little bit way too long had to bend the spring little bit further to clean installation . spring came with the side stand bolt and nut .according to the descrption they all stainless steel .Installed the ss bolt and nut and they exact the same as OEM .THIS SET HAS WAY DURABILITY THAN OEM SPRING BECAUSE IT'S STINLESS STEEL. TIME WILL TELL .Well made by the producer.I WISH I TRY TO USE SHORT SIDE STAND LINK BUT COULDN'T PURCHASE ONE.If I have a short side stand link and won't able to bend the spring.It is not necessary to fold the spring a little more to reduce its length. Without any problem I was able to install it easily because the spring was bent to reduce the length.. GREAT PRICE FOR THE SET.WORTH IT. I can highly recommended this product .WEBIKE Shop is one of the best shop for buy finest quality and rare products for cheap prices.webike shop offers great service.so anyone can buy product with confident. webike packaging is awesome.they secure the items inside the box with the bubble (doesn't matter the product size,they do it anyway ) wrap for further protection.I highly recommended.WEBIKE.. awesome people and 5star shop. .Thank You !!! View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Custom Side Stand Shaving
[How is it used?
The Side Stand is highly customizable and must be used.
Was the one you received as per Image?
Yes
Was the installation difficult?
No
How was your experience with it?
Side Stand of shaving. cool.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
None
View detail
Retrochic
There are many different parts manufacturers out there, but we decided that this was the one we wanted to use.
Loved the design!
It is stronger than OEM steel plates, which leads to increased rigidity!
View detail
Stainless Steel and rustproof.
Material:Since it is made of Stainless Steel, it can be used under the engine without worrying about rust. I thought it would be quick and easy to install, but it was difficult to fix the special nut at the bottom of the engine, and it took longer than expected. Satisfied with the product itself View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Seriously perfect! !
The color is also similar to the genuine one, so I'm really satisfied. However, the one dissatisfaction part is that the torque value is high, so it will be difficult to do without power. ------------------------------------------------------------ -------- The colors are similar to pure, so I am really satisfied. However, one dissatisfaction is that the torque is high and it will be hard to do without power. Powered by Google Translator View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
When RIA was formed into 17 inch, since the inclination at the time of a stop became large, the goods here were purchased in pure side stands. If a higher vehicle is not intentionally raised only by forming 17 inch, 25-mm long will think that it is un
When RIA was formed into 17 inch, since the inclination at the time of a stop became large, the goods here were purchased in pure side stands.
If a higher vehicle is not intentionally raised only by forming 17 inch, 25-mm long will think that it is unnecessary and it is a thing as which about 15 mm may be sufficient.
In case of this product of 25-mm long, a motorcycle stands too much for a while, and he has a feeling.
The point in which positioning at the time of paying a stand is possible can be evaluated.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Adjustable Side Stand
PMC (Performance Motorcycle Creat) realized a superb adjustable side stand chromed all in aluminum the workmanship is really of quality, perfect on a kawasaki 750 cm3 from 1993. PMC (Performance Motorcycle Creat) realized a superb adjustable side stand chromed all in aluminum the invoice is really of quality, perfect on a kawasaki 750 cm3 of 1993. View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR)
standing too long
The material is made of cast iron, but I didn't want it to fall again, so I took it off immediately. View detail
Just in case.
Engine Guard to protect the lower part of the engine
The product is as good as it looks. The installation was not particularly difficult and there were no parts that did not fit.
The finish is good and beautiful.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Looks and practicality
I installed it for the countermeasure of the ride height that had changed by the lay-down and the change around the front.
https://youtu.be/7NdjIG-_XnQ
View detail
Used for ZEPHYR750
You can use it for ZEPHYR.
This is Recommendation because it is made of Stainless Steel and is resistant to Rust wear.
The spring is hard, so you need to hang a little when you frame it.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Cost conscious. That's PMC!
When 2cmLowdownRear suspension link was put in Z900RS, it was the case that there was no problem at all even with Side Stand of NORMAL especially, but the Caster of Front was made to stand. (Front fork protrusion amount is 25mm out from NORMAL) Of course, I thought about the reliability and cost performance. It was easy to remove the bolt, nut, and collar after removing the spring with the STAND raised. It was easy to replace the bolt, nut and collar. Today, I changed the mounting bolt to 64Titanium, and I used NORMAL because Nut is a special Nut with a thin stopper.
I think PMC can make TitaniumParts that we can afford.
Please do your best. I'm rooting for you.
View detail
Fits: KAWASAKI Z900 (KZ900), KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1100R, KAWASAKI Z1100GP, KAWASAKI Z1000R, KAWASAKI Z1000J, KAWASAKI Z1000 MkII, KAWASAKI Z1000, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z1000J, KAWASAKI Z1000R, KAWASAKI Z1100GP, KAWASAKI Z1100R, KAWASAKI Z2 (750RS/Z750FOUR)
The roughness of the castings matches the old car
It's in use on the KZ1000J
The OEM STAND was tired, or maybe the body of the car was a bit sleepy I replaced it with Reproduct
My posture when I stopped was crisp
Even though the paint is new, the roughness of the castings gives it a very nice, period feel
View detail
Fits: KAWASAKI GPZ750R, KAWASAKI GPZ900R, KAWASAKI GPZ750R, KAWASAKI GPZ900R
Is it consumable?
The quality of the product is good.This is my second purchase after the Stopper boss came off. 7 years I have converted to 17Inch wheel The leaning of the body is also the best View detail
Good work
Solidly built
It gives it a custom look
It's a bit heavy for its shape
Note that it cannot be installed at the same time as the OEM Slider
View detail
It is better not to have rust.
It is a part that I usually do not mind, but I did not like the rust which I care about when I suddenly, so I made it a brand new item. It's not casual, but it's quite crouching so I have never gone to a new one. View detail
It was good to purchase
I bought it for diverting Z1's Side Stand to Z750FX2. Side Stand has processed a little, but the product is Large in no processing and durable. Quality is also good and I'm satisfied with Large change. View detail
very satisfied
I tried this product because Spring is downs and I raise Side Stand and it gets a glaze.
Spring's tension also improved and I could improve it.
By the way, Side Stand uses Small version of Z1 thing.
View detail
Fits: KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 750
Spec of car body. I appreciate being able to adjust according to!
Although it used it from before, it is intense due to aged deterioration, and it was replaced with a new one.
As long as you are using it for a long time, the pinched portion to the car body gradually spreads (See photo).
The STAND adjustment part also distorted slightly in Color.
Lengths of ± 20 mm each have a Spec. It is appreciated because the adjustment is effective for the change, but it is saved personally if the adjustment range is a little wider.
I made clogs on processing.
Quantity : To use with 2pc eyes is a satisfactory product overall.
View detail