Reviews
I'm a little nervous.
Installation is easy, just swap them in and out. However, it feels shorter than expected, and the STAND-UP is a bit scary.
I guess I'll get used to it.
View detail
![DURACON(R) for [Repair]Engine slider](https://img.webike-cdn.net/catalogue/images/62290/000LZBH0_TS.jpg)
Buy as Axle Shaft
I bought this for my Triumph STREET TRIPLE.
The part used was attached to the Axle Shaft of the Rear.
In a DIY job, I threaded all the way through the Axle Shaft and attached the DURACON I bought to each end of it.
The Swing Arm interfered, so I put a 27mm Socket in between, and it was very stable and easy to install.
It popped out a little like Peg, but when I knocked it down, I installed it on the ground together with Engine Guard, and the car body was not damaged. Especially the footpeg, before I put this DURACON like Peg, the footpeg hit the ground, and the footpeg was broken many times, and repairing and repairing was very Large, but it did not hit the ground at all, and it became the best finish.
Also, I've tried several Chinese DURACONs on Amazon, but they all shattered in one shot and were completely useless, but this product has a solid weight and doesn't seem to break easily. I'm glad I bought it.
View detail
usually
[How is it used?
Forest Road - Mountain Play
Was the one you received as per Image?
It was exactly as pictured. The finish was beautiful and the mounting bolt holes were correct.
However, the hole for Drain is about 1/3 gap and too small to fit the tool.
Once installed, I had to remove it and do a hole expansion large.
Was the installation difficult?
It was not difficult, and the mounting bolt holes were aligned properly.
How was your experience with it?
I think it's strong enough if you don't use it extremely hard.
I've been hitting a lot of fallen trees and large stones, but I've been able to use it without any cracks, although some distortions appear.
[Included Parts:were they on?
All the necessary bolts for installation are included.
[Was there anything that disappointed you?
Not particularly
View detail
That seems a bit high to me
I put it on in case it happens, but I'm not sure how useful it will be I'm hoping that I'll be able to remain unaware of this The price is a little too high for what it is, but the appearance is not so luxurious It doesn't look very expensive View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
Good
Unlike the other manufacturers, I liked that it was not very noticeable It may be the individual difference of the vehicle, but there was a place which interfered with a part of cowl and I shaved with File And although the tightening torque is described in the Instruction Manual If you tighten the torque, it won't torque-tighten I stopped to some extent and in some places So far, no oil leaks etc., so I'll have to wait and see View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200 DAEG
Impressions after product installation
Because it is excellent in terms of product, I feel no blur on the car body.
However, the amount of gold is high, paint is bad, and it will peel off quickly.
I feel regrettable.
View detail
I am disappointed (-_-)
It installed in 06 MODEL of CBR 1000 RR.
Since I was also wearing the same Axle Slider in the CB 400 SF that I was riding the previous time, I bought 06-07 for car type, MODEL exclusively but this time Bolt on the Brake side is long! It happened to have a short Bolt on hand I was disappointed with Manufacturer, but I doubt whether it did properly Fittingtest.I would like the user not to let the parts go out.I do not want you to write it as a special MODEL in Package! It is forbidden!
View detail
Invisible Size
Attached to ZZr 1100D. Slider's Size is Small, so it's inconspicuous. Only the Gold color of Base part claims it. Easy installation just by inserting Parts into the installation. There was no problem such as trouble of goods. View detail
YZF-R25 Quantity : Pair (for Left and Right) The position is different
Purchased for YZF-R25.
First of all, it is tough if Bolt of installation place is hard and there is not Wrench of Large eyes.
I could not get out of Small Hexagonal Wrench and licked the mountain a bit and I used an 8 mm hex socket for the Large Torque wrench and it was easy to remove it.
However, Quantity : Pair (for Left and Right) There will be a difference in the position of.
Right Side may be bothered because of the knee hit position.
Goods of K - FACTORY can be replaced without removing Cowl and where the price is somewhat cheap, but the place where the knee strikes is very MinusPoint.
For those who can remove Cowl we recommend other companies' products.
View detail
Fits: HONDA CB1100, HONDA CB1300 SUPER BOLDOR, HONDA CB1300 SUPER BOLDOR, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300SF, HONDA X-4
Attachment rather than practicality
Good as Attachment
When I opened Package
The print character has peeled off
Hide downward. (; ゜ ロ)
One Side, this price is too expensive ~
Quantity : Pair (for Left and Right) If it is ◎
As I like it, I like it
I will do it.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1300R GSX1300R HAYABUSA
There was no store [ in stock / store / although the slider of the agras was considered ] in the surroundings, and since it was also troublesome to have placed an order, it chose here. They are parts which I do not want to play an active part except a
There was no store [ in stock / store / although the slider of the agras was considered ] in the surroundings, and since it was also troublesome to have placed an order, it chose here.
They are parts which I do not want to play an active part except appearance.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA, SUZUKI GSX1300R GSX1300R HAYABUSA
the structure attachment was easy structure -- tolerably .
the structure attachment was easy structure -- tolerably . View detail