Reviews
Fits well on NC750X DCT 2023
Received the order within the week via EMS. Item fits well on my NC750XDCT 2023. Workshop installed the stand and works perfectly although the bike is generally heavy thus can be difficult to mount/dismount. Highly recommended. View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Cb400Sf main stand
Wow item is very easy to fix and solid too. Shipment is fantastic! Super fast shipment! Definitely will purchase more! Thanks Webike! View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
The upright position gives it a nice old car feel.
[How is it used?
?When I do some tinkering with my motorcycle, it is easier to work and clean with a center stand, and I thought it would be better for my motorcycle to be upright.
Was the one you received as per Image?
It was more solid than ?Image. I think it is indeed OEM.
Was the installation difficult?
?Rubber was hard to screw in, so I applied detergent and put it in a vice.
?I had referred to a YouTube video on how to install the spring, so I shaved about 3mm off the spring and bought a tool to pull the spring beforehand.
?Spring was attached by pulling at the end, but it took a lot of force and was tough. I bought a tension spring hook just for this.
How was your experience with it?
?Of course it's very nice; you pull up the Grab Bar while putting your weight on the protruding part of the STAND, which is quite heavy. But I feel secure because I'm not standing on one leg, but standing firmly.
[Included Parts:were they on?
?I had everything in order. I prepped everything on YouTube to see where and how to use it.
[Was there anything that disappointed you?
?Motorcycle is used but the Center Stand and Engine Guard are new, so it looks almost like a new car at a glance. I am glad it is as I expected.
?No disappointments at all. The only thing is the high price.
■Points of installation and hang
?Spring should be hooked up and installed last. Also, the Spring pulling tool costs 500-600 yen, so you should definitely buy it in advance. It is quite difficult to do because there is an exhaust system nearby.
Availability and clarity of Instruction Manual
?I don't think there was an Instruction Manual to begin with. Everything was taught on YouTube.
?Honda, please thank YouTube for their help.
Notes
?I don't want to knock over the Motorcycle by doing something wrong in the first place, so I always hang a chain block from a beam in the back of the ceiling. (Chain block was bought to move garden stones.)
Again, using the Chain block, Quantity:Pair (for Left and Right) I put a rope through the bolt at the top of the rear shock of the motorcycle and lifted the rear of the motorcycle up to make it easier to work with. Also, at first, I asked my wife to stay on the other side of the motorcycle so that the motorcycle would not fall over. It is good for those who have a variety of tools, but those who work with a minimum of tools need to be careful not to let it fall over.
? There is a Motorcycle shop on YouTube that has installed a Center Stand on a CB400SB, and you should definitely watch that and learn before you do it. Also, he is very skillful and lean.
Items to buy together
?Tension spring hook (like a spring puller)
?In my case, it is an early NC42 CB400SB, so I needed Grinder or sandpaper.
Opinions and requests to ■Manufacturer
? On YouTube. Instruction Manual contains …" but the flimsy Quantity written in English Version:It only contained 1pc. of paper. the Motorcycle shop on YouTube was much clearer.
?Motorcycle is a used 2011 model, so I originally planned to buy a cheap used Center Stand and install it, but there are few people who can buy the Center Stand Body at a reasonable price, but I couldn't find the SpringOthers' Included Parts:Quantity. However, I could not find many people who were selling them, and I could not find any other Included Parts:Quantity other than the Body.:I don't know where Set is sold, so in the end, even if I could buy Center StandBody for 3000-4000 yen, I had no choice but to buy it new for me, because I couldn't do anything if I couldn't get decent Included Parts:.
?? Also, there is no mention of Center Stand in the Parts catalog or anything, so it still seems that Included Parts:is hard to get, and it is hard to understand how to install it, and if Motorcycle shop can install it for about 3,000 yen, from today's experience If a motorcycle shop can install it for about 3,000 yen, I think it is cheap enough. But if they say 5,000 yen, I think it is a bit expensive.
I think it is still a great product as an ?OEM Product.
?It would be helpful if you could mention the OEM Center Stand in the Parts catalog if possible.
View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor
Sleek Engine Guard for CB400SF
On the pictures, we could see the nice packaging provided. It is simple to install. Unlike other engine guard which is big and bulky, this is sleek, minimal and classy. It looks like it comes with the bike, it does not looks out of place. The black colour matches the body frame of the Honda CB400SF. View detail
Excellent OEM Centerstand
Installed on a 2014 Honda CTX700. Bikes should come with centerstands from factory we all know this. Especially if they have the mounting points for them. Finding one for this bike was unusually difficult. Retailing at around $200 + shipping. This was a cheaper option at $150 with the chain stop shipped. Not to mention Honda built. Can't go wrong. Now brakes jobs and chain adjustments are a breeze. View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE
Blends in with Cowl and is less noticeable
It is small and when you knock it over, Cowl will get scratched. However, it is cool because it is streamlined. View detail
Useful for daily maintenance
I feel that it should have been included from the beginning, but since it is relatively inexpensive, I did not hesitate to install it.
It does not feel that heavy to lift, so I think it is well made.
This makes ChainMaintenance much easier.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Good product for CB400SF, Revo 2019 model
Product fits nicely without the need to remove the exhaust pipe. The tech fixed it up in 10 mins and commented the ease to fix it up compared to those after market main stand. View detail
Good product!
A good product corresponds to the NC 750 X 2023 version everything perfect. Delivery for Italy at least 25 days in my case ---------------------------------------------------------- A good product corresponds to the NC 750 x 2023 version everything perfect. Delivery for Italy at least 25 days in my case Powered by Google Translator View detail
Fits: HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100
black or chrome???
it is not specified if they will be black or chrome I thought I would receive them in chrome, but I received them in black. In the photo they are chrome otherwise the packaging is perfect as well as the dela View detail
Satisfied with the product,...
I am very satisfied with the product itself, including the color of the sub-frame and its appearance after installation.
However, the seal on the text portion is too cheap for the price.
Since it is a commemorative MODEL, it is attached to the Aluminum Plate with Transfer Sticker, etc,
I think it could have been a little more special. I feel that it would have been better.
I bought it for the purpose of dress-up, so I don't know if there is any change in rigidity.
View detail
Fits: HONDA CB1100, HONDA CB1100 EX, HONDA CB1100 RS, HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100
Great Genuine engine guard!
These black genuine Honda guards are very easy to fit and look very discrete. You can find Honda's fitting intructions via the Honda Portal so torque settings for all bolts are listed. I found delivery from Webike very speedy as I used Fedex delivery which was on a discount at the time so shipping was just one week fom Japan to UK Well done Webike great prices and quick delivery..I will recommend you to my biking friends. View detail
I feel more centered!
Shouldn't all chain drive bikes have a center stand as stock? I think so, so I added one to my 03 Honda CTX, and I am very happy with it. I looked up some videos on Youtube to help with the process, and it all went well, although securing the spring was more difficult than I thought it would be. A ratchet strap did the job, but the spring is really tight. Overall, I appreciate Webike's price and shipping. I got the stand stopper as well, it's essential for my bike. View detail
Rugged OEM Product
We chose OEM because it seemed to be sturdy, though pricey.
I asked Shop to do the installation because it seemed complicated.
View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R FIREBLADE SP, HONDA CBR1000RR-R FIREBLADE
It looks nice.
Since the shape is Parenthesis, there is no discomfort in appearance after installation.
As the name suggests, it protects Frame.
It does not protect up to the engine, so I think it is not for beginners, but for people who go on circuits or for people who are familiar with motorcycles as insurance.
View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor
Discreetly Cover Engine
Installed on CB400SF.
It is good that it is inconspicuous.
Installation was easy by myself.
I haven't tipped it over yet, so I don't know how effective it is, but the Engine part seems to be well protected.
View detail
Fits: HONDA CB400 Super Boldor, HONDA CB400 Superfor, HONDA CB400 Superfor, HONDA CB400 Super Boldor
Main stand installation
Purchased to install on a 2012 CB400SB. However, since it is 2014 or later OEM parts, the Hook is not attached to the body as it is, and it needs to be shaved. I was able to install the Hook after shaving 3mm with File. The last difficulty was that the spring was so strong that it could not be attached according to the instruction manual. It is working well when I check the amount of oil and clean the chain. View detail
Fits: HONDA CRF1100L Africa Twin, HONDA CRF1100L Africa Twin Adventure Sports, HONDA CRF1100L Africa Twin Adventure Sports ES
The original bumper works great
My motorcycle is Honda CRF1100L. Since the original bumper is not standard and needs to be purchased separately, I bought this original bumper on webike. This original bumper is made of stainless steel tube and electropolished , corrosion resistance, easy to clean dirt, installation does not require additional fixing, all are reserved by the original factory, very simple. -------------------------------------------------- -------- My motorcycle is HONDA CRF1100L. Since the original barrier is not standard, I need to buy it separately, so I bought this original barrier on the webike. , Corrosion -resistant, easy to clean dirt, and do not require additional fixation, all are the original positions reserved, which is very simple. Powered by Google Translator View detail
protect my car
My motorcycle is a HONDA X-ADV750. The bumper I bought elsewhere is very rough, the hole spacing is not correct, it is not good-looking at all, and it is also very heavy. I re-purchased this HONDA original side bumper on webike. The accessories are still the original ones. The installation fits perfectly and the shape is also handsome. Webikie shipped very quickly, the packaging is in good condition, and will repurchase. -------------------------------------------------- -------- My motorcycle is HONDA X-ADV750. The barrier bought in other places was rough, the installation hole distance was not right, it was not good at all, and it was very heavy. I re -purchased this Honda original side bolt on the webike. The accessories are still good. The installation is strictly seamless and the shape is also handsome. Webikie is delivered quickly, the packaging is intact, and it will repurchase. Powered by Google Translator View detail
Fits: HONDA CB400 Superfor, HONDA CB400 Super Boldor, HONDA CB400 Super Boldor, HONDA CB400 Superfor
It is surely better to install it in both new and used cars.
If you own a motorcycle, sooner or later you will probably fall over your car. Even if you are a NORMAL motorcyclist, I think you should install this Engine Guard in case of a fall.
Footpegs, crankcases, mirrors, tanks, handlebar weights, side cowls... the list goes on and on.
However, the Crankcase and Engine have a dramatically higher chance of being undamaged if tipped over (depending on how it tipped over, speed, etc.), so repair costs can be reduced, the design and large size are not obtrusive, and if the color Black is selected, Touch The design and large size are not too obtrusive, and if you choose the black color, it is easy to touch and panRepair.
If you put scratches on the crankcase, it will be difficult to match the color of the NC42 because it will probably be Silver or a darker Gun meta color. The paint will also be exposed to heat, so Touch panLevel paint is not expected to adhere well to the paint.
From the above reasons, if you are a CB400 owner, you should definitely install this product. By the way, it is not so easy to install by yourself, so please leave the installation to Motorcycle shop.
View detail