Reviews
It certainly works.
Looking at the frame structure of the NINJA2 Helmet 50/400, it seems to me that the Left Side conectoplate is intentionally made weaker by bending it. It is my imagination, but it may be that the torsion of the frame improves mobility. The claim is that the Damper will absorb vibration and provide straight-line stability by restricting the movement here.
As it was, the ride quality was not good, so I weakened the front and rear Suspension settings by about 2Click, which I think improved the driving stability without worsening the ride quality.
I am a dull person who cannot tell the difference with a slight change, but I can certainly feel the change. It may be too much to say that the driving has become more luxurious, but I feel a sense of stability.
I am tuning the front and rear suspension with Technics or NITRON, but if you put it on a vehicle with Normal suspension, I think the original uncomfortable ride and thrust will be emphasized. However, if you use NINJA2 Helmet 50/400, it may be good for those who don't feel bad ride quality.
View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
I'm almost satisfied.
Exhaust system was changed from front pipe to MORIWAKI.
The vibration and other factors had already been improved because of the replacement of the
Frankly, it was hard to tell the effect.
Speed at which strong vibration occurs at high speeds is 3 to 5 km/h
I think it has grown.
I definitely felt that the rigidity of the Frame was slightly increased.
I have seen the video etc., and it has a very good reputation.
The more novice you are, the less likely you are to expect too much.
I am sure we will see the effect after long-distance, high-speed driving, etc.
I did the installation myself, but it is definitely better to have a store do it for normal people!
There is a high TorqueBolt attachment and removal of Engine Jack-up and Engine hanger bolt.
There is Torque management, and a reasonable selection of tools, including a hexagonal box wrench,
It would be difficult without knowledge.
As for the look, it is very good as it attaches to the lonely Engine surroundings.
It would be better if there was a Plating Specification or something like that.
View detail
2017 CB1100EX Active Frame
Excellent product shipped all the way to Canada very promptly. It is a quality item that I look forward to installing. Customer service from Webike was also excellent and I already have a list of other items that I will be buying from them. View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
resolving a severe earthquake
The tremors from 90 km dramatically disappeared and I am not tired at all even when touring long distances. View detail
ActiveSub-frame
It is so easy to bank that even a layman can understand it.
Timing to bank the Motorcycle itself allows it to fall over in a straightforward manner.
View detail
ActiveSub-frame
I'm glad I bought it...and I'm happy with it! It's cool! It looks a lot different (and better)! View detail
Good
Installing the product is simple. Install the lift jack under the engine After releasing the bolt, install the subframe. The spacer was about 1mm larger. If you buff it after installing all the products, you can get the perfect glow. I used a chemical called pikal. View detail
just in case
At a glance, it looks as if it were carved out of gold, but the entire body is made of low-wear hard resin, and only the logo plate is made of aluminum.
It is not a Type that covers the whole body like GBR, so it may not be able to protect you in a Large accident like a complete overturn.
I think it is sufficient for touring use.
It's about half the price.
View detail
Repeat because I fell down and took my own life.
The year before last, it fell over and effectively protected Engine, so Repeat.
The accuracy of the installation is excellent.
I had to wait quite a while due to a long shortage.
View detail
Focus on appearance
I installed it and honestly cannot tell how rigid it is. However, the Handlebar and Seat feel stiffer than before. Setting of front and rear suspension is necessary. Installation itself is easy. If you change the order of the instruction manual, you can do it without Jack-up, but Center Stand or Maintenance Stand is indispensable. I am not a fan of XJR, but I like XJR even more now. View detail
It's good looking, but …
Anodized treated, colors are great, design is cool! …However
Is it not suitable for a racing stand…? Compared to other Hooks
It is hard to STAND. I am also worried because I don't think it is very hard.
Recommendation for those who prioritize looking good!
View detail
Active Subframes
Hello I saw that I bought a lot of parts from WeBike. I was using SSB engine guard It was a great defense But the downside was that it was too heavy It had to be light, securing rigidity That's why I chose this product I installed it and ran excitedly As expected, it's strong and light It's beautiful to look at Thank you. View detail
Low overhang
I was using a Slider made by another company, but it seemed to damage the Frame when it tipped over, so I replaced it with this one.
Weight is Quantity:Pair (for Left and Right) and weighs approximately 560g, with a good texture of cosmetic Plate and an unassertive appearance.
As you can see, the overhang is small, so it seems to be less effective in protecting the Cowl. However, the large contact area of the plate-like shape reduces bending moment and seems to place less load on the Frame.
There is no detent, so it needs to be tightened by hand while keeping it level. It would have been nice if there was a notch for positioning.
It seems that the Cowl can be removed as it is if you twist it at an angle, but it is quite wide, so it would be better to remove it.
View detail
It works!
I bought and installed a rear suspension that can be adjusted for damping, but I wasn't satisfied with the results. (´-ω-) I was disappointed because it was an expensive purchase. However, when I put the Sub-frame on and ran the car, I found that it was very easy to use. "What? You're such a good worker?" I guess "Custom" means "Balance" is "Large", right?
Also, the vibration of the Engine, which had been bothering me since I switched to a Handlebar, is now Mild and my hands don't tingle anymore.
View detail
High quality with excellent fit & finish, direct bolt on
I bought the anodized black for 2019 honda cb1100RS and it fits and looks good on it. The frame guard comes with a crossmember long bolt for further frame / chasis strength. the guard itself is very well made, highly recommended! View detail
beautiful & practical engine guard
Installed the Active engine guards on 2019 honda cb1100RS. the fit and finish is perfect and the engine guard is very high quality. highly recommended! View detail
Do you think it's more important to look good?
For installation, support the Jack just below the Engine and remove it from the rear Bolt, followed by the front Quantity.:I worked on 2pcBoltOne Side at a time, and I think it can be done without any problem if you do simple maintenance of Motorcycle. The biggest concern was that the Bolt would not fit due to the slight engine gap when the Bolt was removed, but the Front side Bolt was a little tight, but with a Jack, it did fit after a little adjustment. I think it looks good, but what is the effect? View detail
![[Repair]Engine Cover Slider](https://img.webike-cdn.net/catalogue/images/70100/IMG_1694_R_TS.jpg)
good-looking
The product is well designed and can be installed in a natural way.:Pair (for Left and Right) It is also nice to know that Rose is sold at the same price as the original. View detail
Fits: HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1300ST
Appearance over function.
I'm not sure about the rigidity since it was installed since the car was new, so I'm not sure about the rigidity. w
However, I think it looks a lot cooler around the Engine. It is a self-satisfying product for me.
View detail
Fits: HONDA CB1300SBSP, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300SFSP
Black and even tighter
This time, I purchased and installed a black sub-frame, which tightened it up even more.
When installing the Slider, the Bolt was not long enough, so I purchased a 130mm long Bolt and was able to install it.
At first I thought about buying Silver, but I am really glad I bought Black.
View detail