Reviews
I checked for conformity and it didn't.
Lowdown on FXDC.
The 1inShort Stand of a certain U.S. Brand has been Rusted so much that we decided to replace it with this one.
If it is made in Japan (including overseas production + quality control by Japanese companies), it is safe in many ways, and there is hope that maybe it will not rust so easily.
Now assembly.
Remove the old STAND, remove the Block for fixing the STAND to the Frame and the parts for fixing from the old STAND, attach the Block to this product and the parts for fixing... it won't fit!
The STAND side is slightly thicker and does not pass through the hole.
I thought I had made a mistake. I was surprised, but I didn't make a mistake.
Slightly thicker, this thickness, perhaps the thickness of Plating?
Thick plating is welcome for Large, but the assembly part must be made with that in mind!
It took about an hour of extra time, but we were able to assemble it safely.
Nowadays, even CHINA has better accuracy. 。 It is impossible.
I wonder what people who can't afford to cut down would do in this situation.
I've already removed the old one, and the mental burden of putting it back in is LARGE.
Harley is still Jack-up and waiting for delivery for return and exchange? There's no guarantee that the replacement will fit properly.
Incidentally, the quality of the finish of the product itself is not as good as that of a certain U.S. product.
But I thought it was totally OK for such a low price before assembling it.
If the quality is not normally assembled, even at this price. Ok." It will not be a
If this doesn't produce Rust for a long period of time, it might make up for this annoyance....
View detail
Spring is a dented.
The mileage of his beloved 98XL1200C is 108,000 km.
Spring was dented and STAND was hit when laid down a little at LeftCorner.
When I replaced it, STAND returned crisply and improved. I wish I had replaced it earlier.
When replacing, remove the STAND and apply Spring to assemble. Spring will not extend by human power.
View detail
I guess I could substitute something else, but it's cheaper.
[How is it used?
I use it to prevent the STAND from slipping into the ground and the motorcycle from falling over when parking on uneven ground, such as at a camping site at the end of a touring trip.
Was the one you received as per Image?
The material of the coaster is probably ABS plastic. The diameter is 160mm and the thickness is 6mm.
How was your experience with it?
It is sturdy enough to withstand even an FZS600 with a total weight of over 200 kg. There is a hole to put a string through, so it is good to hook the string to a handlebar or something to prevent it from being left behind.
[Points to note]
There are two protrusions on the top surface of the Coaster, and the STAND is inserted between the protrusions, but the distance between the protrusions is too wide, so the protrusions are not very useful. And since the top surface of the Coaster is slippery, it sometimes slides when I step on it with STAND. So I cut out a 5mm-thick rubber sheet, put it between the protrusions and fix it with superglue, and put the STAND on the rubber sheet.
How did it compare to other products?
There are products that can be used by mounting on the STAND side, but I decided against it because the ground contact area is too small and I am not sure about using it on uneven terrain.
Other items that would be helpful
Point of installation and hang:It is better to use a string through it to prevent misplacing it.
Opinion and request to Manufacturer:It would be better if the top surface of the coaster has a non-slip coating. Also, it would be better to have a bright color (White or Yellow) instead of Black, so that it would be harder to leave it on the ground.
View detail
It's huge.
I bought it with the intention of using it on my touring destination, but I laughed when I saw the actual product.
It's too big! I can't take it with me.
The diameter is about 16?
I have no choice but to use it at home.
View detail
สินค้าดีเยี่ยม เกินความคาดหมาย View detail
Large satisfied with the functionality
There were times when the NORMAL Side Stand was really hard to get out with the ride and I felt like I was going to stumble standing up.
After installing this product, the Side Stand is easy to take out, and the appearance when you park the car is also good for parenthesis. This is the Items that can be easily installed and can be used for recommendation.
View detail
Fits: Others
It can not be used for OEM Replace. It's for my own work..
I bought it without examining it well.. Because it was Rotaryfor Top.
It seems that substitution is impossible because the length is shorter than OEM's ShifterPlate.
It seems to weld the Bracket of Hand shift.
Things are cut out of iron and the atmosphere is nice....
So I went to the warehouse.
View detail
Large satisfied with less than half the OEM price.
NeoFACTORY has everything. DAYTONA and Extension of one country are too expensive, KIJIMA's design is bad. At that time I found this exactly the same as OEM's Jiffy STAND.
It's easy to install, it makes STAND easier to put out.
View detail
Because Spring is solid - - -
I used it for the 2007 model XL 883 L.
I was trying to remove it, but I was unable to install Spring 's power too strongly.
I used Spring hook, but I gave up because I did not seem to have tried it many times.
After all it returned to the original Spring.
I attached the original Spring smoothly, but I do not know if there was hang in the installation.
View detail
It attaches to a STAND, the hole of business is made, and goods are fixed with a Screw. Since this work had tools, such as a Drill, it was good, but since [ mere ] it was somewhat narrow, between the nails of a tip attachment part did not enter
It attaches to a STAND, the hole of business is made, and goods are fixed with a Screw.
Since this work had tools, such as a Drill, it was good, but since [ mere ] it was somewhat narrow, between the nails of a tip attachment part did not enter.
It was wearing which deletes between [ a little ] the
nails.
View detail