Reviews
No instruction manual included
There is no instruction manual. The collar and bolt are confusing, or rather, wrong. The "right side, left side" in the product description photo is "right side, left side" from front to back. The 150mm bolt and 68mm total collar are installed on the left side of the vehicle. The 115mm bolt and 33mm total bolt are on the right side of the vehicle. The tightening torque is 35 ft.lb. It was able to be installed properly on the American specification 451cc Eliminator. There is no instructions come with it. 150mm bolt and 68mm (55mm + 13mm) collar are for the left side. 115mm bolt and 33mm (20mm + 13mm) collar are for the right side. Tightening torque is 35 ft.lb. They fit Eliminator 450 and 500 too. Enjoy! View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA250R
Stylish Slider
Product Name
Engine Guard for NINJA2 Helmet 50R/400
Item Number
weg-8e
Vehicles
NINJA400 (2BL-EX400G)
Number of man-hours
About 2 hours
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, Driver, Hammer, Pliers, etc.
Why did you choose this product?
I chose Slider to protect NINJA400. I also chose Endurance because they are one of the cheapest sliders and a manufacturer with a sense of security. I also thought it looked stylish and not too bulky.
Was the one you received as per Image?
The Black paint was even and solid.
Was the installation difficult?
It was difficult because I had to remove the Cowl. Make sure you remember where the removed Large amount of Screw was attached. Also, the screw holes to insert the Slider were out of alignment, so it felt a bit forced.
How was your experience with it?
When I used it, such as when it was bumped, it protected the Engine and exterior well when I knocked it over to test it out. It also seemed to be very strong. It would be nice if I could spend time without using it, but it has a great Parenthesis look. It could also be used as a footrest.
[Included Parts:were they on?
The instruction manual, Screw, and Washer were all there.
[Was there anything that disappointed you?
Screw lock agent if available.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI NINJA H2 SX
Cospa is good
Engine slider replacement completed
The engine hanger was not replaced, but installed the same way as the OEM Product.
Bolt size is WorldWalkM10 and OEM ProductM8, but I used OEM Product's Washer and it fits WorldWalk well.
Length also OEM Product is Quantity:Pair (for Left and Right) I measured it and it seems to be just right at 65mm, because WorldWalk attaches it at the same length, differently at 70mm and 55mm.
Quantity:Pair (for Left and Right) The way it comes out is different in the following two cases, but it can't be helped.
Can I put this down to stretching my legs when my knees get sore?
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI NINJA H2 SX
The texture is good
Engine slider replacement completed View detail
![[for Repair] Exhaust System Guard For Z1000](https://img.webike-cdn.net/catalogue/images/22934/weg-1m-1_TS.jpg)
Fits: KAWASAKI Z1000 (water-cooled)
three
The design is nice and solid.
I can recommend the cosmetics.
View detail
Good product
I think this product is worth more than the price, and I have a better feeling about the make and the price than selling it at a higher price by emphasizing the Brand name. View detail
Fits: KAWASAKI NINJA 650, KAWASAKI Z650
Motorcycle essentials
Purchased for a 2019 Z650 The mounting bolts are not the usual Hexagon Bolt, but Hexagon Socket Bolt (Cap bolt) for use with normal socket wrenches You should get a Hexagon Bolt separately It's affordable, black and not too flashy, and I think it's a must-have for motorcycles View detail
If you want to cut it off as a stumbling block, you can use it as a stumbling block;
I installed it as an insurance policy in case of a stumbling block
I think the shape and texture are fine
It can be expected to have some effect on stumbling, but the Base part is too thick and too firm Therefore, I feel that if the car falls over while driving, it might cause damage to the body frame
Hope you don't need Slider?
View detail
I think it's on the inside!
The base plate is fixed with EngineAnchor bolts It seems to absorb the impact, but you need to check the Bolt It seems to absorb the impact, but you need to check the Bolt View detail
It's simple but safe
It is a conscientious price
Easy installation. The tool is only 14 mm Box Ratchet and 8 mm hexagonal Wrench.
Because it was uneasy if it is a Type attached to the Frame behind the Radiator
Just like OEM, we decided to use Engine Mount with this product.
Because we only screw the resin at the tip part by hand, we think of some kind of loosening prevention.
When dropping out, it takes trouble for the following car. I will evaluate Minus with safety
View detail