Reviews
Cutting off the Main Cause of Failure
I have a JumpCoupler that I made by myself, but I wasted the cost of 3.500 for one jump coupler, so it would be better to buy one. It's a WaterproofCoupler, so it's safe from now on! View detail
No problem with mounting accuracy?
KLX (2012) I installed it when I installed Delta's Exhaust System on my car?
The hole position was also very accurate, and I was able to install it without any problems.
I don't really feel like I'm using it because it's a part to supplement strength, but the product itself is tough, so I'm sure it's doing its job.
Like an insurance policy?
View detail
K&T Heel guard
About quality and texture Very good quality anodize is a deep blue one that hasn't faded much for in dietect sunlight most of the time About the feeling of use it is a very discreet heel guard compared to some others barely noticeable About Design Thin ,minimalist of a heel guard does make you wonder how much it woukd stop the chain from impacting one's leg heel foot ? Haven't had to as my chain has not broken since putting it on About Size Chart n/a Cost performance and comparison with other products In my opinion a good price for the products quality About shipping and packaging I had no issues Any concerns, cautions, or advice when purchasing none I'd recommend it ! View detail
with a clashing or clanging sound
It feels like it's stiffly reinforced. View detail
Chain Guard
Parenthesis I hope you are feeling better 。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。 View detail
I installed the seat rails before I broke them.
We used this product because the OEM Silencer is part of the strength structure of the Seat rail, so when we changed Silencer to Other Brand Product, we had to put in reinforcement instead.
important item
[Was there anything that disappointed you?
It's not a big problem, but it's the fact that the Spacer is not attached to the Seat rail even though the middle part of the three screw holes does not adhere to the Seat rail and there is a gap.
Do you have any wishes or improvements you would like to make for the Manufacturer?
I want it to come with a Spacer and an extended Bolt.
[Do you have any products to compare it to?
We have not found any other similar products.
Frequently Asked Items
What made you decide to buy?
In changing Silencer to Other Brand Product, at first I considered buying the board of Aluminum at the home center and making it by myself, but considering the price of this product, I thought it was better to buy it than to spend time and effort to make it by myself. Because it is matte Black Anodized and the corrosion prevention is also done.
How was your experience with it?
Since we don't do Tandem and we don't have to carry heavy loads, the Seat rail doesn't seem to be under that much load. By the way, the reinforcement plate is Material:It was aluminum and 6.5mm thick.
Was the installation difficult?
Because OEMSilencer is quite heavy, it is necessary to take care not to drop it when removing it.
【Please tell me the installation point and hang】
The screw holes are not tightly connected to the seat rails at the middle of the 3 screw holes, so I put in the Spacer with 6mm thickness to fix them in place.
[Was the Instruction Manual easy to understand?
The instruction manual is not included, which makes it even more important to have the proper knowledge, skills and tools is required
[Included Parts:were they on?
This is the only item in the photo, there were no other included parts.
View detail
Pretty good
I heard the OEM exhaust system is part of the Frame as well So many people have cracks in their frames when they change the exhaust system to an external one So it's a must-have part No problem for installation accuracy and painting You should buy it because the price is very cheap View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Simple
It is a simple Guard that only prevents entanglement. If you remove the OEM, only the installation part will remain, so I will use it temporarily. Impression of appearance changed a little by pasting Carbon style Cutting sheet. View detail
Sure, maybe it's reinforcement
Before, in the Seat frame welding part, the crack enters, and after the repair, this Plate is installed Certainly, I think that it is reinforced (In Normal muffler, it is not meaningful) View detail
OK with KLX 250ES !!
It was a product of the theme of D Tracker, but it was OK with Frame structure, KLX 250 SES too!. By the way, the Exhaust System is Super trap. I think that the strength is enough at about 3? Thick. The attached Spacer was also Exactly. View detail
Fits: KAWASAKI ZX-25R, KAWASAKI Ninja 250SL, KAWASAKI Ninja 250SL
Ninja250 (2 cylinder 2015 years) It attached to
Ninja250 (2 cylinder) At Front 16 mm, Rear 25 mm Down.
It is for Ninja 250SL, but Ninja 250 (2 cylinder) Because I did not have Short Stand for.
When it is the shortest, it is 3 cm shorter than NORMAL.
It makes a fine length, so it will be a good length. The ground plane did not become parallel to the ground, but it is about no problem.
It is heavy with adjustment formula 663 g for NORMAL 459 g. Is it the weight for strength?.
I am happy that the gold price is a bit cheaper.
Ninja250 (2 cylinder 2013 ~) It is Recommendation to people who are Lowdown by!
View detail
Price suitable
I wish Bolt for installation was included and included.
Although making was Simple, I did not have instructions and so on, but I think that it can be installed easily.
View detail
YOSHIMURA's Silencer - - -
Purchase to use for YOSHIMURAExhaust System of KLX 250.
The shape of Silencer is inconvenient, hits at Limit and does not attach - -
Probably not, return to Normal muffler, use with D-TRACKER.
Can be installed without problems with DAYTONA's Exhaust System.
Some Silencer required processing.
View detail
With this I am relieved
Exhaust system outside the company from the time of second-hand purchase. I did not know that OEMExhaust System doubled as reinforcement.
The position of the mounting hole is Exactly and it is a product of unquestionable precision.
Since installation Bolt is not attached, it must be troublesome to be prepared.
View detail
Down Exhaust System
Who wants to add Down Exhaust System
If you do not turn this on, Frame cracks
To fall. Let's put it before it gets it
Also, even if it is not Down Exhaust System,
It is better to attach this to the Exhaust System becoming
View detail
To reinforce Seat rail
Purchased with change of Exhaust System.
Originally, I missed 1 pc fixed Bolt of OEM's Exhaust System, already the frame was distorted, so I reinforced using this product.
Since it was lifting the Seat rail even even with the OEMExhaust System, I attached it while raising the frame when attaching it.
D - TRACKER 's Seat rail is weak, so if you do not reinforce with this product I think that distortion will gradually increase.
With moderate thickness, Bolt could also be used as it was a satisfactory item.
View detail
Since it was touch that the pure Muffler was reinforced with three Bolt bundles when using the Center up muffler of a DAYTONA, it attached.Since it is safe since there is loading on the Touring etc., but it is also a portion weak from the first, I wou
Since it was touch that the pure Muffler was reinforced with three Bolt bundles when using the Center up muffler of a DAYTONA, it attached.Since it is safe since there is loading on the
Touring etc., but it is also a portion weak from the first, I would like to take care about a crack.
View detail
It is attachment at DR-Z400SM. Although it attaches and about one year passes, there are not the scar of an anodized portion, having become thin, etc. (A sheet is put and kept at a garage) The thickness of the plate, etc. are solid and it is satis
It is attachment at DR-Z400SM.
Although it attaches and about one year passes, there are not the scar of an anodized portion, having become thin, etc.
(A sheet is put and kept at a garage) The thickness of the plate, etc. are solid and it is satisfied.
Since a chain lube etc. will scatter after carrying out chain maintenance if normal is compared, it is indispensable to carry out chain maintenance firmly.
It is not dissatisfied although it is the parts focused on appearance.
View detail