Reviews
HARDYBrace
It is thinner than Handlebar, so it makes a subtle statement.
It is a SMART Custom feeling.
View detail
Great quality and solid crossbar
Very sturdy brace, solid. Great quality. I wish they had more sizes to offer. The clamps are good quality, but not very precise in size. It is 21mm when closed. If you want a precise installation you would have to put a piece of sandpaper over a 20-22mm round steel tube and sand this clamp a little bit. Otherwise it will not close completely on a 7/8" handlebar. I definetly recommend this brace if you need a solid one. I'm using this one for installing a windshield. View detail
HARDYHandlebar Brace is the BEST!
I chose this product because of its price, but I am satisfied with its high quality. It fits my JigSar just right, and I appreciate the stability of the handlebar, vibration reduction, aesthetics, and quality. I chose the short type, and I am glad I bought and installed the HARDY EZAttachment Handlebar Brace! It is my personal best satisfaction. I highly recommend it to everyone! View detail
It is the picture attached to the normal handle of XR230. It cannot attach, although the bar pad was also purchased. He repented [ that what was necessary was just to have purchased LONG on a one size, and ]. This place is sold off by Yahoo! A
It is the picture attached to the normal handle of XR230.
It cannot attach, although the bar pad was also purchased.
He repented [ that what was necessary was just to have purchased LONG on a one size, and ].
This place is sold off by Yahoo! Auctions, and is newly Mr. Webike, and is due to purchase LONG.
When it measures, I would like to see it exactly to the place of LONG whose MINI size is newer than the standard on it, although the bar pad purchased the MINI size of ZETA.
View detail
It is overpriced!
It was installed in order to install Navigation and ActionCamera when touring.
Unlike cheap Chinese products, the installation was done with Bolt On without any difficulty.
The Oil Temperature Meter attached to the Handlebar is visible without any problem.
View detail
Updated in conjunction with Smartphone Holder
Along with the new Smartphone Holder, the Handlebar Brace bar was also updated.
It's neither good nor bad, I guess.
View detail
It's easier to use.
I was worried about Very short, but I decided to go with Short.
For the size, Very short is the perfect width, and Short is a little bit higher than Very short.
I'm happy with it because it's more for the mounting position of the phone than for the rigidity.
View detail
It's fine.
I used it on my HORNET 250 STD Handlebar.
It's more for the looks than the stiffness around the handlebar, and it's useful for attaching a smartphone holder or camera.
The texture is good and easy to install, but the price seems too high.
I wish it was a little cheaper.
View detail
good
I installed it on my PCX.
I think there is just a little bit of Gap and I think I can prepare a suitable Washer to handle it.
The body itself is solid and satisfactory.
View detail
The Shaft and Clamp are the Quantity:It's a set, so it's good.
The color difference between Shaft and Clamp is good, the rigidity of Attachment is good and it is the best for MONKEY125. Unfortunately, the shaft thickness of the shaft is 2mm large and it is the best product (because the diameter is small for the installation of Drink holder, I was able to install the Rubber van Kamase). View detail
Size is so subtle, it doesn't fit!
I checked the Handle size and decided, but it interfered with the MASTER of Brake, and it worked well I can't install it I still recommend the variable type even if it's expensive View detail
Reliable quality
I used it in combination with EFFEX EZ-FitBAR
It was very short and just the right length
It is made by a famous manufacturer, HARDY, and although it is not cheap, I am satisfied with the construction and texture It is
There was a little bit of a clatter in the Brace section, so I put a RubberRing between them
View detail
It's more for Dress-up purposes than performance!
The Handlebar width is narrowed because of the replacement of the Handlebar I bought it because it became difficult to install the Smartphone Holder
Installation is easy, but the adjustment of mounting to the Center took a surprising amount of time
It is better to choose the size of the Handlebar after measuring the place where it is attached to the Handlebar is a good idea
I installed it for the purpose of vibration reduction, but I don't know the effect so much
I chose Gold with the other Parts and it has great color and is not cheap It's a place where you'll see it while you're driving, so you can indulge in self-satisfaction... ♪
Reasonable, but I think it's a very good product!
View detail
If it looks good
If the mounting angle is fixed, if the diameter of the bar is a little thicker ○ Kana, so far as I use it for Helmet's Wire lock, afterwards with Parenthesis View detail
Dress-up than vibration countermeasure
I installed it in the CB 750.
Besides the price, the quality is not good.
As a countermeasure against vibration, I did not expect it, but is it some enhancement of Handlebar?
It is not well understood.
It is Large effect as Dress-up. The Universal nature of Handlebar is also quite high.
Installation is easy. There is neither looseness nor gap in Gap. I think that it is a conscientious product though it may be safe.
It would be better if the color variations were more abstracted.
View detail
It was useless..
I did not match pcx! I ordered it by looking at the impule that conformed to pcx, but unfortunately it did not fit. There is no help but I give it up.. To be sorry View detail
Not attached
CB 1300SB I purchased it for 2018 MODEL purchase.
Since the actual car came to hand, I could not install horizontally by interfering with the bottom of Clich's Oil tank and Brake's Oil tank when I tried to install.
I could not check if I could install it by MODEL until 17 years, but it was Large failure.
If you do not mind even if it is not horizontal please.
View detail
I can not affix it
MASTERCylinder interfere and installation is impossible
Those who purchase please note
If it is Very short it may be attached, but I have not purchased it so I do not understand it
View detail
Satisfied
Angle adjustment of GUYRA Shield Mount the gold fixture Measured because the mount was a cheap The same diameter as the Handlebar.
So before with Handlebar Brace Quantity : Pair (for Left and Right) Two places are 22. I remembered there was a thing of 2 mm and I thought that I should install it on it.
At that time incidentally totally 22. I found this item of 2mm. If this is the case now you can relocate anything attached to Handlebar and Handlebar will also become Snap and buy it as one stone two birds with one stone.
Result Large Correct answer.
View detail
Hinge formula is convenient ....
HURRICANEPipe Handlebar Kit (ZX-14RABS) The mounting. Size is S.
Hinge formula for installation work is Large changeable It is convenient and convenient. Texture and color are also good. It seems that the surface treatment is rustling like a Satin fabric and it is easier to have a Wound when clamping than the thing of the slippery.
But this low price is attractive. Was this review helpful? I do not think I can be convinced without buying expensive items.
View detail