Reviews
Anodized defect
There was Anodized defect like Black Stain.
There is also more visual importance when purchasing with performance emphasis so how about this one. I want a solid quality.
I installed on DJEBEL 250 XC, but Mounting Bolt is M5. I'd like to exchange Bolt eventually, but for reference.
Bolt used is M5, Length is 25 mm and 20 mm. Since it jumps out for a long time it looks X
OEM uses 15 mm, but with this product it is likely to fall off Bolt's shallow light.
It looks nice, but Anodized does not seem to like Jita as usual.
View detail
OEM Mirror clamp can be securely installed if it is tightened with the specified torque amount indicated on the operational manual.However, since it becomes loose once you try to untighten it a bit, you cannot make it just right to have it rotate when
OEM Mirror clamp can be securely installed if it is tightened with the specified torque amount indicated on the operational manual.
However, since it becomes loose once you try to untighten it a bit, you cannot make it just right to have it rotate when it comes under great pressure.
This ZETA Rotating Bar Clamp HM10mm, on the other hand, is good at rotating. It doesn't require fine adjustment when installing, and it keeps accurate tightening force.
All you need to do is to slowly tighten the up & low bolts that fix this bar clamp to the handlebar. If the bar clamp doesn't move even if you rotate it along with the mirror, you should retighten it for 1/4 extra and stop there.
It seems a little weak, but the resin sheet between the handle and this bar clamp will make it stick to the handle.
After this, the mirror will not tilt even if the motorcycle vibrates.
Moreover, in case the mirror receives great impact from fall, this ZETA Rotating Bar Clamp will relieve the shock by rotating itself. The mirror will not easily break if you have this bar clamp.
You might not be able to appreciate its value unless you actually fall. But you will be satisfied by the product itself for it is beautifully finished with anodized color and can become a decorative item.
Providing is preventing. Prevention is better than cure. It's what ZETA Rotating Bar Clamp is for.
As this part will not require overtightening of installation bolts, I am using an aluminum bolt instead (refer to the picture).
It can be tightened and worked even with aluminum bolts. Be assured.
You can upgrade your motorcycle with this dress-up item and improve the function at the same time.
I really want to recommend it to those who ride off-road motorcycles!
View detail
ZETA Rotating Bar Clamp (with Mirror Hole) Part Number: ZE40-9412All you need to do is to replace it with the existing bar clamp. So simple. But this part really works.Not only that its anodized red color is cool, it also releases the impa
ZETA Rotating Bar Clamp (with Mirror Hole) Part Number: ZE40-9412
All you need to do is to replace it with the existing bar clamp. So simple. But this part really works.
Not only that its anodized red color is cool, it also releases the impact on the left mirror or clutch lever by rotating in case you fall. As of today, neither the mirror nor the clutch lever of my bike are damaged. Very good indeed.
It's good because it isn't that expensive, and you get to receive the favor even before you realize.
Since it is really cost-effective I have added one star, and added another one for its stylish design. I even added one more and made it 8 stars thinking of its effect.
It is an item that I really want to recommend to others.
ZETA is really good at doing anodized finishing.
You do not have to worry about color fading from ultraviolet light.
The picture shows the part which have been installed more than a year ago, but you will not see any color fading.
You may not notice its impact releasing power unless you fall, but it's better if you don't fall anyway.
If you drive safe, this item may become just a protection charm. But that will do.
I think it is a good item, for you can make your bike look cool on a small budget.
View detail
It was used for the DR-Z400SM Clutch side.It only exchanges from an authentic positive one.It is [ that it is easy to be coloring ] blue, and the surface is lusterless.The Mirror is equivalent to the 10-mm positive Screw.It is the shin without liking
It was used for the DR-Z400SM Clutch side.It only exchanges from an authentic positive one.It is [ that it is easy to be coloring ] blue, and the surface is lusterless.The
Mirror is equivalent to the 10-mm positive Screw.It is the shin without liking to realize an effect although it is the function for a Lever holder to rotate at the time of the
fall, and to prevent breakage, if this is made.Although it is budget prices, texture is also good and pleasing.
View detail
It is a Cool to appearance. The Clamp is made to a Mirror holder and it contributes to space-saving-ization. If the Plastic parts to put does not fall, isn't it the highest?
It is a Cool to appearance.
The
Clamp is made to a Mirror holder and it contributes to space-saving-ization.
If the Plastic parts to put does not fall, isn't it the highest?
View detail
Although I had ridden on ttr125, since [ with little Space of the circumference of a Handle ] attachment of a Mirror was difficult, it purchased. Since the function which misses a Damage at the time of the fall is attached, I who often fall find it u
Although I had ridden on ttr125, since [ with little Space of the circumference of a Handle ] attachment of a Mirror was difficult, it purchased.
Since the function which misses a Damage at the time of the
fall is attached, I who often fall find it useful.
View detail