Reviews
Greater scope for adjustment
Replaced the mirror at the same time, which was a bit tricky since I had to position the Offset and Mirror at the same time, and since the Brake Side was going to interfere with the Cable, I used the OEM Spacer. I used the OEM spacer because the Brake Side was going to interfere with the Cable. View detail
Mirror Holder is no longer available.
[How is it used?
I bought a used WR250R before the price went up as much as it has now, and it had a ZETA Pivot Clutch Perch CP installed at first, but the Mirror was only installed on the Right Side, so I had to replace it with a ZETA Pivot Clutch Perch CP. Is it legal to use a LargeMirror without LeftMirror, or is it scary when changing lanes?" I looked closely around the clutch and found that the ZETA clutch holder does not have a screw hole for mounting Mirror!
The OEM clutch holder of the WR250R has an integrated Mirror Holder, so when it was replaced with a ZETA one, the Left Mirror could no longer be installed.
I ordered this product as soon as possible to avoid danger, as my driving skills and ability to perceive danger are not very good.
Did you receive the item as per the Image?
I ordered the product after thoroughly checking Webike's product description section, and it was exactly as I had imagined it to be.
Was it difficult to install?
BoltQuantity this product to the space in the root river of the Clutch holder attached to the Handlebar.:It is a simple job to attach with 2pcs.
Quantity:Pair (for Left and Right) If the Mirror mounting spacing of the two mirrors can be installed at the same location, there will be less discomfort when the Motorcycle is viewed from the front.
How did you like it?
Once firmly installed, the Mirror Holder is a normal Mirror Holder without any Mirror gaps while driving.
When I purchased it from Webike, it was on sale at Timing, so I was able to purchase it at a lower price than OEM holders for other vehicles.
Was "Included Parts:" attached?
BoltQuantity for HolderBody and mounting:2pcs are included in the package.
Were there any disappointments?
I purchased a Blue alumite product and it faded faster than other Anodized dyed products.
I am thinking of painting it matte black with a cheap can of Spray if the color fades any further.
Other items that would be helpful
Point and hang of installation
As I mentioned above, I think it would be less uncomfortable when viewed from the front in Symmetry if the Holder is mounted at the same spacing as the Mirror position on the Brake Side.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...sorry my memory is a bit hazy as I purchased it quite a while ago.
[Notes]
There is nothing special in terms of functionality, but Blue alumite fades quickly, so I think it would be safer to purchase Black.
[ITEMS TO BUY TOGETHER
This is an opportunity to use your favorite MirrorQuantity:Pair (for Left and Right) I wonder if it would be customary to purchase a "Custom"?
[Opinions and requests to Manufacturer
The color fades quickly, so I would like you to take measures to prevent this, and I would like you to continue selling this product for as long as possible.
View detail
For Radial pump master installation
I used this product when I changed my MT-09 to YZF-R1 Radial pump master cylinder. There are only a few Mirror Brackets that are compatible with Opposite Thread Screws, so I am glad that this product is available.
It would have been better if Bolt was in Black.
View detail
Mounted on LeftMirror
It is attached to LeftMirror.
I couldn't see the back of the Large half of the Mirror because it was hidden by my arm.
Now it is in full view.
The entire Mirror will be more protruding than in NORMAL.
If you drive without VANVAN of slip-throughs, you're good to go.
View detail
Pricey, but...
I unexpectedly decided to get a brembo MASTER and looked for a Handlebar Clamp to put Mirror on it.
POSH and other compatible products are available at a lower price than OEM, but it is hard to throw away OEM products that claim bremboMark....
In the end, we chose and installed the OEM, although it was more expensive due to the color and the fact that it was OEM for peace of mind.
When I put it on, the coloring is the same as the MASTERBody, so the sense of unity is different.
I think the compatible products are different colors, so they won't look so integrated. I think.
The price is high for such a tiny component, so there must be some conflict in that area. I think so.
View detail
Mt. Screw fits the bill!
It is a dedicated product, so there was no excess Screw Mount and it fit perfectly. View detail
Mirror Holder
I bought this to put Mirror on a MASTER I received.
Too bad they didn't have the same color.
View detail
High price, but quality is first class
Since I changed the MASTER of MONKEY125 to RCS and the Clutch holder to Koken, I bought this to make the Handlebar area simple.
The quality of the car is perfect, and as it's a brembo OEM, it fits perfectly.
However, because the screw allowance is a little short, if you use the Mirror of MONKEYOEM, it will bottom out on the Mounting Bolt of Holder as it is.
I installed a 5mm aluminum spacer in it.
The problem with the most Large is the price! It's expensive!
Quantity:Pair (for Left and Right) If you put them together, it will be over 10,000.
Well, it is not a part that needs to be replaced regularly, and it becomes indispensable to give a sense of unity with MASTERetc., so I recommend it to those who can divide it as a necessary expense.
View detail
This is all I could find.
The clutch holder has a bolt pitch of 36mm and this is the only one I could find.
ZEPHYR400OEM but Bolt pitch is different from other manufacturer.
I was able to install this product because it has a long hole for the 35mm standard.
However, due to the long hole, the head of the Bolt did not cover the entire hole, so I put in a Washer.
I bought the Tap size M8Screw because I bought it to attach RAMMount.
If it is here, it was GOOD to be able to attach Smartphone Holder without unreasonable and uncomfortable feeling.
View detail
good
Pricey, but necessary.
The finish is good.
View detail
brembo Mirror Bar Handlebar Clamp RCS
Brembo masterFor Handlebar.Mirror Clamp for RCS is sold separately as for Right and for Left, but Quantity:Pair (for Left and Right) Subject. View detail
Screw hole position required!
Because I changed to Nisshin's Radipon, the position of Mirror Holder became asymmetric between Clutch Side and Brake Side.
However, it is not possible to install it as it is because the hole position does not slightly match with the Kawasaki OEM clutch side of our model. (It is necessary to extend the hole position by a few millimeters)
I had no choice but to order a Kawasaki OEM Mirror Holder to solve the problem. I think the quality of the product itself is perfectly fine.
You better check the Screw hole Pitch when you buy it!
View detail
Be careful with the dimensions!
Radiphone introduced, but Quantity:Pair (for Left and Right) I bought it because the Mirror position has changed in
The Clutch Side can also be made with Mirror Holder to make the quantity:Pair (for Left and Right) However, I couldn't install it because the dimension of screw hole is a few millimeters different from Kawasaki OEM Clamp.
If the Screw hole position is widened with File etc., it is possible to install it, but I was worried about the strength, so I bought a Clamp with Mirror Holder of Kawasaki OEM and solved the problem.
There was nothing wrong with the product itself, I just didn't do my homework.
View detail
Cheap.
The build quality is good for the price, but the shape is rather crunchy and I personally find it a bit delicate. Anodized is beautiful and the screw holes are fine, so you can use it without any problem. View detail
To use the Ono SpeedLightClutch holder on public roads
When using the Ono SpeedLightClutch holder on public roads, the Back I need to install the Mirror, and this product is what I need to do
I am very happy with the rigidity and quality of the product
Cut-out and say also Parenthesis good
View detail
After all it is not JAPAN
? 【What made you decide the purchase?】 Since cheap analog products have broken, I selected a Manufacturer item.
? 【How was it actually used?】 I am firm and secure.
? 【Was it difficult to install? (Hard parts case)】 it's simple.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 Since there is a possibility of cracking if it narrows too much, it would be better to use Torque wrench.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?] None. It was as expected..
? [Request to Manufacturer - Please tell me if there are any improvement points】 No particular.
? 【Have you compared items?】 None.
? [Others] Many inexpensive products mimicked just the form, but again I realized that the price and the quality are in proportion.
View detail
Clutch side, required processing
With the ZA-9R E type becoming NAKED, Quantity : 2pc. Purchase Set.
Although there is no discomfort with almost the same color shade as the OEM color after the above model change over the years, on the Clutch side Screw Pitch is different so we installed it by File.
However, Mirror installation angle, or Quantity : Pair (for Left and Right) Care must be taken because the Lever angle will not be delicately matched.
As it is still running, it is an important part so we recommend that Left Side also be fitted with exclusive items matching Screw Pitch.
I am satisfied with Large change regarding products.
View detail
Rather than changing MASTER
Because of FirMASTER's Mirror installation loss, I will try to introduce it.
It's not better than nothing, because I do not need Mirror.
If I have patience and do not have Mirror, I will be caught by the police and this place is where I should endure Gold.
View detail
Do you take lightness or take freedom?.
I bought it with EasyAdjustClutch. Holder type is also available. Although there is an advantage that angle adjustment can be done freely here, it is quite heavy. I could not try it, but the Holder type may be lighter and maybe better. View detail
It is not possible either.....
With ZX-14R ABS bush hanging
I used it for processing ClutchReserver tank
Outside the mirror section
It is the same shape as the OEM, but the color tone is different
It is a little disappointing.
View detail