Reviews
It is casually MORIWAKI.
I was not happy with the snail-like cowl mirror on my CB400SB, and when I replaced it with a handle mirror, I bought a MORIWAKI one to fill the original hole. At first I ordered a cheap one from Amazon.com, but they didn't have the color I wanted, so I decided to go all out and get MORIWAKI anyway with WebikePoint.
It is a rather nondescript cover with a black matte finish, but since it is a MORIWAKIDesign (I don't know much about it and it is not Mania), I decided to go with it. As I have said many times, it is nothing special, but I think it covers the Mirror Hall in a subtle way.
View detail
inconspicuous (Compliment.)
The quality is high!
I chose Black to give a sense of unity, but with this size, you may want to use a flashy color as an accent color.
The price is for one, so I think it is a little expensive, but I am satisfied with it.
View detail
inconspicuous (Compliment.)
Perfect Fitting View detail
Mirror Hole Cap
I bought this to hide the Mirror hall as I changed my CB223S to a Bar end mirror.
Note that the quantity is 1 pc.
If you value cosmetics, you can use Homsen Screws or Vinite.
The texture is good
View detail
For off-road motorcycle Mirror Hole Plug
Used for Mirror Hole Plug for off-road motorcycle.
I often remove Mirror when participating in Races, etc., and wanted to prevent mud, etc., from clogging it.
There are many inexpensive Color line nap products, so it would be useful to have a few.
View detail
When running Circuit.
Purchased to cover up the area where Mirror was removed when driving on Circuit.
Good because it looks Refreshing and Race ish.
Mirror removal is easy as you just use Bolt instead of Mirror.
View detail
Used with Mirror-less
It was used in the area where Mirror was removed for Racerization.
The texture is cut-out and has a nice, luxurious feel. However, I chose Black because I don't really want it to stand out too much.
I don't have to worry about it, but I think it would be better to have custom parts.
View detail
water (esp. cool, fresh water, e.g. drinking water)
I bought this because I didn't want water or dust to get into the Mirror bolt when replacing OEM Mirror.
They blindfolded me nicely.
View detail
I like it.
It's a bit expensive, but it makes it look Refreshing. View detail
Installation accuracy is excellent, but…
To install, simply remove the Mirror and tighten the two screws.
Installation accuracy is quintessential Rai TEC.
But the price is also a quintessential Lai TEC lol.
I think the cost is a little low.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Mirror Fill-in
Mirror was changed to Bar End Type, so it was installed for preventing Rust in the hole and appearance.
No problems were encountered, and the product was installed with good appearance.
View detail
Fits: HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR
It is not cheap.
There is no functional significance.
It just looks good.
Quantity:2pc. I thought it was the price of a set, but it was the price of 1 pc.
Quantity:Pair (for Left and Right) Installed 1 pc. at a time. Self-sufficient.
View detail
TANAX Napoleon: -- stay-boots product number: -- vehicle type wide use goods details - corresponding to SA-12 merchandise information -- a mirror attachment -- the protection from dust etc. - A screw adapter etc. can be hidden and a dress-up up is sim
TANAX Napoleon: -- stay-boots product number: -- vehicle type wide use goods details - corresponding to SA-12 merchandise information -- a mirror attachment -- the protection from dust etc.
- A screw adapter etc. can be hidden and a dress-up up is simply possible.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, APRILIA CAPONORD 1200, APRILIA DORSODURO1200, APRILIA TUONO V4 1100 Factory, BMW F800GS, BMW F800R, BMW R1200GS, BMW R1200GS Adventure, BMW S1000R, BMW S1000RR, DUCATI DIAVEL, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821
It might be a good idea to replace it with a bar end mirror.
I think the price is a little high.
It is necessary to seal the OEM mirror hall to replace the bar end mirror, but I think it is also necessary to fix the MONSTER S2 Fluid Tank with a mirror hall.
Material:Because it is aluminum, there is a high likelihood that it will be tightened with too much force or licked during removal.
This is the second time I have purchased this product, but it was licked on removal and needed to be replaced.
A little It will be dressed up around the Handlebar.
I have purchased Red before and this time I chose Red again.
View detail
No discrepancy, no cheapness, good!
OEMMirror→I bought this to fill the hole because I changed to a bar end mirror. It is totally textured and looks beautiful. I think the price is a little less than Friendly. View detail
A little small, but works fine.
Amazon. Normal Thread Screw, Opposite Thread Screw Of Quantity:I bought a set, but both were Normal Thread Screws, so I returned them and repurchased from webike.
I'm not sure if it's cosmetically sound since it's not a Large price.
If you use a bar end mirror, it is necessary to have a pure normal thread screw hole.
The aluminum seemed to deform when torque was applied, so I lightly tightened it with a ten-yen coin.
This product is sufficient because it only plugs the screw holes.
If I had to pick one, I'd say it was Exactly right if the diameter was a bit larger.
View detail
Spec. (Dimensions of each part) I'd like you to put
When I replaced the Mirror with Other Brand Product, I used ScrewAdapter to attach the car Both Sides because of Opposite Thread Screw.
The Bracket Boots that came with the Mirror and the OEM Bracket Boots were not long enough and I felt like I just added them.
I replaced it with this Boots, and the ScrewAdapter became hidden, so I don't have the feeling that I just put it on.
The dimensions of each part of the product are shown on the back of the Package, but not in the Catalogue.
You can inquire to the manufacturer or go to the store to see the actual product, but I attach a diagram for your reference.
View detail
Fits: KAWASAKI NINJA250R, KAWASAKI NINJA400 (2014-)
Fits a 2020 NINJA2 Helmet 50R
2020 NINJA2 Helmet50R (EX250P) attached to the
This is not necessary when you remove the Mirror, but it is one point.
It's a bit pricey for a Mirror Hole Cover, so I think the cost is a bit low.
It's well made, so I guess it can't be helped.
View detail
Fits: KAWASAKI Ninja400, KAWASAKI NinjaZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Good texture. Sober but elaborate construction, unobtrusive in a good way.
I've decided to remove the Mirror as I have more opportunities to run on Circuit.
I've been looking for a Can Seraar because my aesthetic sense won't allow me to just remove it.
I've seen other Manufacturers with less than stellar reputations and flashy, expensive products.
intermediate between the two. (?) I decided to go with this one.
As a side note, this is my first MORIWAKI product.
I don't have much luck with KAWASAKI.
The black anodized glossy finish is a great way to hold down the claims of the Parts.
The logo is properly included in the proportion of the three, and it also has some three-dimensional modeling.
It is an elaborate construction and I am personally very satisfied with it.
The reaction makes Bolt's head stand out.
So, I made the Plate about 1mm thicker and the outline about 1mm larger.
If you make the Bolt a plate Bolt and make the Plate surface flat, you get 100 points.
The price seems rather high, but it can't be helped.
It's not like it's going to break, it's not going to sell in quantity, and it's going to cost a lot of money to build ... .
It is much cheaper than One-off production.
View detail
protection
This product is used to protect and prevent Rust on the fixed part of the Mirror.
It would have been JUST a little bit smaller, but I thought it was okay because it was protective.
View detail