Reviews
Larger than expected.
I bought this to install my AZ Mirror on my BirdCity, which I used to use on my old single car!
I didn't actually use BirdCity's OEMRubber because it worked just fine!
Now in stock at the PartsSmall store!
I think the quality etc. is fine.
View detail
It is only for CBR25RR, so it is fixed firmly and the design is good!
[How is it used?
This is for fixing the cowl when the Mirror is removed during Circuit driving.
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
Installation is easy
However, the hexagonal size of the Hexagon Socket and Bolt of Mirror attached to the car body is 5mm, but the hexagonal size of the Hexagon Socket and Bolt for fixing Mirror Canceller is 4mm, so I have to carry two different size tools. I have to carry two different size tools.
How was your experience with it?
I am very happy with the design and the installation.
[Included Parts:were they on?
The product consists of a Mirror CancellerPlate and a Hexagon Socket and Bolt for fixing the Mirror CancellerPlate, but there is a Vinyl type attached to the screw to prevent the Hexagon Socket and Bolt from coming off the Plate. By attaching the Vinyl type to the Bolt part of the Hexagon Socket Bolt that holds the Mirror in place, you can prevent the Bolt from being lost when the Mirror is removed.
[Was there anything that disappointed you?
The size of Hexagon Socket and Bolt for fixing Mirror Canceller was 4mm.
I wish it was the same as the size 5mm of Hexagon Socket and Bolt for MirrorBody.
View detail
Fits: DUCATI PANIGALE 1199 R, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299, DUCATI PANIGALE 959, DUCATI PANIGALE 1299 R FINAL EDITION, DUCATI PANIGALE 1299, DUCATI PANIGALE 1299 S, DUCATI SUPERLEGGERA 1299
That's the exclusive product
When the Cowl mirror is moved, it is the Plate which blocks the NORMAL installation hole. Well, if it is said that this price is cheap with mere Aluminum Plate, it is not cheap. However, if it is thought that it makes by oneself, after all it is a thankful commodity. Because it is a special product, the screw hole position etc. with OEMBase plate is almost no problem. Although the texture falls a little when compared with DucatiPerformance of the ridiculously high OEM, because there is only Red alumiteSpec. here, I think that it is good for the person who does not want to make it conspicuous by making Cowl the same color as possible. View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel 1100, HONDA Rebel1100 DCT
Was good
It's just as I imagined and I'm glad it's a PetitDress-up! View detail
4.0
How it came about:to plug the screw holes in the Tanax Mirror that I purchased. It is rain and dirt prevention.
Installation and accuracy:Just insert it. Anyone can do it.
Quality and texture:Plastic is still cheap. However, I don't mind it because of its small surface area.
Shape:round.
Visibility:of course, but it doesn't increase visibility. It doesn't matter.
Cost performance:Waterproof and dustproof for 300.
Overall:I'm glad I bought it.
View detail
Installed on TOWN MATE 90
I put Opposite Thread Screw Adapter on my Yamaha motorcycle so that I can hide the joints and I changed the Mirror to a Napole On Trad mirror so that I can put Opposite Thread Screw Adapter on the Plating. I bought it because I thought it might rust as it had done so.
It hasn't rusted at all since it was installed and I highly recommend it.
NORMAL also had a cover like this one.
I wipe it down occasionally with RubberProtectant for care.
View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
Well, in its own way.
Minus screws in general tend to deform after repeated mounting and dismounting.
Because of the Hexagonal Wrench holes, the risk of breakage is low if the proper tooling is used.
As far as visibility is concerned. "Parts to show. It's not so much a concern because it's not
View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
It's a little expensive. "Yes"
General Minus screw (Slots for Coins) Is
As long as the material is aluminum, it is easy to be deformed by repeated mounting and dismounting.
This is a Hexagonal Wrench hole, so no extra force is needed to put on and take off.
I think the Risk of damage is low.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Required for Bar end mirror changes
W800 Quantity:Pair (for Left and Right) Since I changed the Mirror of the Bar end mirror to the Bar end mirror, I bought it to plug the existing Mirror hole.
The color and size do not become unnatural and there is no problem, but I feel that tightening is necessary sometimes because I have not put in Washer and Spring washer. (It's been about 3 months and there's no looseness.)
It's not the usual Bolt, it's a hexagon, so it's not so obvious.
View detail
I'm not sure how to tighten it up
I bought it as a blindfold in Mirror hall
You can choose from a variety of colors, but I chose Silver to match the colors around it
The product itself isn't bad, but the way it was tightened up wasn't great for me personally
Hex wrenches are included, but they are not used as they should be, but rather to hook and tighten It will be a thing (Second photo.)
When you apply Torque, the hole will be a little bit wound and you will get BALI It is recommended to protect and tighten the tool tip with Masking tape
I like the look of it, so I'm happy with it for now
View detail
worth having
When running off-road on a TRAIL vehicle, etc. with the Mirror removed, the Mirror Put this product in the hall to keep the mud out
It's a great buy if you're going to ride off-road because you can get muddy without worrying about it
View detail
Quality is good, but Cost is high
Bar end mirror installed
Can be fitted with OEM Bolts
OEM Bolt cover is Material:Since it's plastic, I think it would be more consistent in color tone if it was made by other Anodized products
Fitting and texture are fine, but the price seems a bit high
View detail
I want it to come with the OffsetHolder
I bought this for the purpose of plugging the bolt holes in the company's OffsetHolder
This is a product I wish came with the Holder
The texture is brittle and plastic
View detail
Large strange, I'm happy with it!
I'm not using it to install the smartphone holder, but it's still intact I used the Mirror installation hole Because the Cap is originally attached to the hole, I removed it with a slotted screwdriver I used the Bolt that I purchased View detail
No dissatisfaction
The accuracy is good as it matched the Screw hole batch. The texture is also good! But the price is a little expensive. I have not reached Mirror yet because I do not receive it. View detail
It is totally different if there is something
Bolt does not rust first. When I removed Cap from the Mirror of the Motorcycle I used the other 8 days ago, the Bolt was almost rusty so it was capable of stopping rust.
Of course, quite capable as Dress-up.
If you brush Goshigoshi with 100 Cream Cleaner, Mirror revives shine together.
When removing, use Minus of GlassesScrew or minus of Precision Driver can remove comparatively little scratches. It might be a bit harsh to remove it perfectly intact.
View detail
Even cheaper ...
Bar end mirror Purchased when installing.
Accuracy is as good as entering the thrill in hand.
The shape is a natural feeling, ★ 5 in the sense that it is inconspicuous.
I do not complain if it is a bit cheaper ....
Right SideOpposite Thread Screw Please note when purchasing!
Let's take a minute after passing through the item description column well.
View detail
WEBIKE 's Page is unfriendly, is not it?
Screw is positive - Do you have a reverse? Do not you know what Webike's product page looks like?
My Motorcycle is Quantity : Pair (for Left and Right) I also needed Opposite Thread Screw, so I bought it at Amazon.
Other people are also written, but it is very soft. The paint will peel off when rubbing for a while with - Driver.
The rest is Gold price. It is not necessary for the Large amount, so Quantity : 2pc. Whether there is no problem if Set 1000 yen can forgive.
View detail
It will look better!
I used it for Mirror of DAYTONA.
It is possible to use it if the hexagonal part that hits the tool of Mounting Bolt is 8 mm.
It is recommended that rain water accumulates to prevent rusting and appearance also becomes SMART.
View detail
BW'S125 2016
Purchased because it replaced Bar end mirror.
I found a thing of Opposite Thread Screw of 8 m and attached it with conversion.
Well I fell with this feeling.
View detail