Reviews
Neat appearance. Prevents rust caused by raindrops.
Removed the cowl mirror from CB400SB and replaced it with a handle mirror. At that time, I replaced it with TANA-X Shark5. I couldn't bear the uncomfortable feeling like a snail when I rode SUPER BOLDOR for the first time, so I spent a large amount of money to replace it with my favorite mirror.
However, because of the cowl, I could not easily install it, so I even bought a Tanax Adapter or something like that, and finally got it to fit nicely. Finally, I was able to fit this cap.
The product is good, of course, but I think it is a little expensive if it is stolen or falls off due to vibration. If it were a little cheaper, I would like to cover various places properly.
Please give us a discount. Also, please give us the smallest size.
View detail
Thanax M10 mirror bolt cap
Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install.
If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top.
Webike delivery and packaging are in excellent condition. Thank you. -------------------------------------------------- -------- Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install. If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top. Webike delivery and packaging are in excellent condition. Thank you. Powered by Google Translator
View detail
Back Mirror Fixing Section Protection
I have been using it to protect the back mirror fixing area and prevent rust, but it has deteriorated and will be replaced.
It hides the root of the fixed part and does not look bad.
I wish the selling price was a little lower.
View detail
TANAX M10 Mirror Bolt Caps
125 years old, 125 years old, 125 years old.
I want to know more about this.
I bought the genuine Monkey 125 side mirror because I couldn't see the rear clearly.
After installing the offset holder, the mirror viewing angle will be good, allowing you to see what's behind you and drive safely. -------------------------------------------------- -------- The side mirror of the genuine Monkey 125 was purchased because it could not show the rear. After installing the offset holder, the mirror viewing angle is good, so you can show the rear so you can drive safely Powered by Google Translator
View detail
arrangement
Quality and Texture Information Plastic Products It's neat to look at the feeling of use Products to purchase together TANAX: Off-set Holder 30 [SA-23] It's easy to install Cost performance and comparison to other products TANAX M10 Mirror Bolt WeBike packaging is always great, arriving in a week for delivery and packaging Concerns about purchase TANAX: If you purchase Off-set Holder, you can neatly organize the purchase together View detail
OEM Parts Flavor
[How is it used?
In conjunction with the conversion of the Mirror on the 390DUKE to an Other Brand Product, we decided to use the Tanax Off-set Holder 45 (product number:SA-25) to improve the Mirror's visibility, I installed this product to prevent water from collecting in the hexagonal holes of the bolt and rusting.
Was the one you received as per Image?
Material:It is a Plastic Cap. If you handle it roughly, it looks like it will be damaged soon.
Was the installation difficult?
There are no claws attached to prevent it from falling off, but it is a little tight-fitting so that it will not come off immediately. I tried to remove it once as a test, but it was quite difficult, so I don't think it will come off without permission while driving.
How was your experience with it?
I am satisfied with the finish as if it were OEM Parts.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang for installation:If the cap is pushed in at an angle, it will break. if the inside of the hexagonal hole is already rusted, it is better to remove the rust first before installation.
Instruction Manual:There is no Instruction Manual, but as you can see, it is a simple structure, so you just need to push it gently into the hexagonal hole of Bolt.
View detail
Retro Style.
Ideal for creating a Retro Style. It also helps to hide Mirror's fixed Nut, which is rusting from scratches caused by tools. View detail
I tried to put it on, but...
[How is it used?
Use Mirror of another Manufacturer.
Because of the disappointing appearance of the cap bolt that came with it (Rust, scratches),
Purchased along with Cap bolt from Tanax Napoleon On.
Was the one you received as per Image?
Yes
How was your experience with it?
Tanax Bolt itself, with good plating quality,
Just by replacing Bolt without any caps.
I was satisfied with it, but I put it on since I purchased it at the time.
However, it is troublesome to remove the Mirror when adjusting the Mirror position,
I think the Demerit called "Large" might be more Large. Personally.
View detail
This is a must for off-road mirrors!
I bought this for the root dress-up when I replaced the Mirror on my CRF250RLY50 with a DRC161 off-road mirror.
This product is sure to increase the overall Off-road feel.
However, when using CRF250's 161 off-road mirror, it is necessary to pull the mirror up as far as possible while expanding the upper part because the mirror's foot part is too short to tighten the fixing bolt if it is installed as it is.
New Material:Since it is a Rubber product, it can be spread out quite well, but it is considered that sufficient care should be taken to avoid the possibility of it being cut if it is spread out too wide.
View detail
TANAX Napoleon: -- stay-boots product number: -- vehicle type wide use goods details - corresponding to SA-12 merchandise information -- a mirror attachment -- the protection from dust etc. - A screw adapter etc. can be hidden and a dress-up up is sim
TANAX Napoleon: -- stay-boots product number: -- vehicle type wide use goods details - corresponding to SA-12 merchandise information -- a mirror attachment -- the protection from dust etc.
- A screw adapter etc. can be hidden and a dress-up up is simply possible.
View detail
It's cheap and looks great!
[How is it used?
I installed it because I thought it would rust if I could see the Screw part of the Mirror.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
We will install them together when we replace the Mirror, but it should be easy to do.
How was your experience with it?
No problems at all, it works and looks Refreshing.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular. It seems to be durable.
View detail
TANAX M10 Mirror Bolt Cap
About quality and texture - Top quality. Smooth surface finish on these black plastic caps form TANAX. About the feeling of use - They fit perfectly into the countersunk allen head bolts I had fitted to the mirror mounts when I swapped from the lollipop mirrors to barend mirrors and the caps have now finished off the mirror change beautifully. Products to buy together - If you are looking to blank off the original mirror mounts you will also be wanting to have a pair of barend mirrors in your Webike shopping cart also. Difficulty of installation - A very simple installation process of just pressing them in firmly but I also like to add a little silastic sealant so they don't move over time with the engine vibration. Cost performance and comparison with other products - Extemely cheap solution to the unfinished look of having open bolt holes in your field of vision while riding. No cheaper option that I could see but plently of CNC machined fasteners at a higher cost here on Webike if you aren't happy using plastic caps. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These M10 mirror bolt cap are sized to fit into the hole on top of the bolt and not the bolt hole itself. View detail
It gives a bit of an off-road feel.
I also purchased Boots here while changing Mirror. I wasn't expecting much in the way of effectiveness or appearance, but I was just curious. In conclusion Better to have a little than nothing..." It feels like it is. I thought it would be a little more fit since both Mirror and Boots are from the same TANAX Napoleon product line. View detail
It'll make you look good!
I used it to cover the Bolt hole in my Tanax OffsetHolder! Looks like a Large thing! I didn't have the right tool on hand, so I had to remove the Mirror from the OffsetHolder.
Cap should be fitted only after the Mirror is properly angled and each part is firmly fixed! I thought the price could be a little lower. I thought it could be a little less expensive!
View detail
Don't get the OEM feeling with Bolt's Cap!
I added the Side Mirror Base and bought a special Bolt cap.
Quantity:It was 1 Set of 2pcs. (Side Mirror Base was sold one piece at a time, so I made a mistake and bought 2Quantity.:(I've bought a Set... sweat)
I am satisfied for this product.
Maybe it could be included with the Side Mirror Base! Am I the only one who thinks that? (laughs)
View detail
Spec. (Dimensions of each part) I'd like you to put
When I replaced the Mirror with Other Brand Product, I used ScrewAdapter to attach the car Both Sides because of Opposite Thread Screw.
The Bracket Boots that came with the Mirror and the OEM Bracket Boots were not long enough and I felt like I just added them.
I replaced it with this Boots, and the ScrewAdapter became hidden, so I don't have the feeling that I just put it on.
The dimensions of each part of the product are shown on the back of the Package, but not in the Catalogue.
You can inquire to the manufacturer or go to the store to see the actual product, but I attach a diagram for your reference.
View detail
It is the same manufacturer, so the delivery is very good.
Bolt with Cap will hold water.
You don't want to see it rusting as it is often in your view.
It fits the Bolt well and the outside diameter is just right.
I think it's a little expensive for resin Parts.
View detail
protection
This product is used to protect and prevent Rust on the fixed part of the Mirror.
It would have been JUST a little bit smaller, but I thought it was okay because it was protective.
View detail
Larger than expected.
I bought this to install my AZ Mirror on my BirdCity, which I used to use on my old single car!
I didn't actually use BirdCity's OEMRubber because it worked just fine!
Now in stock at the PartsSmall store!
I think the quality etc. is fine.
View detail
หากต้องการความสวยงาม สิ่งนี้ จะทำให้หัวน็อตกระจก ดูโดดเด่นยิ่งขึ้น View detail