Reviews
Neat appearance. Prevents rust caused by raindrops.
Removed the cowl mirror from CB400SB and replaced it with a handle mirror. At that time, I replaced it with TANA-X Shark5. I couldn't bear the uncomfortable feeling like a snail when I rode SUPER BOLDOR for the first time, so I spent a large amount of money to replace it with my favorite mirror.
However, because of the cowl, I could not easily install it, so I even bought a Tanax Adapter or something like that, and finally got it to fit nicely. Finally, I was able to fit this cap.
The product is good, of course, but I think it is a little expensive if it is stolen or falls off due to vibration. If it were a little cheaper, I would like to cover various places properly.
Please give us a discount. Also, please give us the smallest size.
View detail
Thanax M10 mirror bolt cap
Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install.
If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top.
Webike delivery and packaging are in excellent condition. Thank you. -------------------------------------------------- -------- Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install. If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top. Webike delivery and packaging are in excellent condition. Thank you. Powered by Google Translator
View detail
TANAX M10 Mirror Bolt Caps
125 years old, 125 years old, 125 years old.
I want to know more about this.
I bought the genuine Monkey 125 side mirror because I couldn't see the rear clearly.
After installing the offset holder, the mirror viewing angle will be good, allowing you to see what's behind you and drive safely. -------------------------------------------------- -------- The side mirror of the genuine Monkey 125 was purchased because it could not show the rear. After installing the offset holder, the mirror viewing angle is good, so you can show the rear so you can drive safely Powered by Google Translator
View detail
arrangement
Quality and Texture Information Plastic Products It's neat to look at the feeling of use Products to purchase together TANAX: Off-set Holder 30 [SA-23] It's easy to install Cost performance and comparison to other products TANAX M10 Mirror Bolt WeBike packaging is always great, arriving in a week for delivery and packaging Concerns about purchase TANAX: If you purchase Off-set Holder, you can neatly organize the purchase together View detail
OEM Parts Flavor
[How is it used?
In conjunction with the conversion of the Mirror on the 390DUKE to an Other Brand Product, we decided to use the Tanax Off-set Holder 45 (product number:SA-25) to improve the Mirror's visibility, I installed this product to prevent water from collecting in the hexagonal holes of the bolt and rusting.
Was the one you received as per Image?
Material:It is a Plastic Cap. If you handle it roughly, it looks like it will be damaged soon.
Was the installation difficult?
There are no claws attached to prevent it from falling off, but it is a little tight-fitting so that it will not come off immediately. I tried to remove it once as a test, but it was quite difficult, so I don't think it will come off without permission while driving.
How was your experience with it?
I am satisfied with the finish as if it were OEM Parts.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang for installation:If the cap is pushed in at an angle, it will break. if the inside of the hexagonal hole is already rusted, it is better to remove the rust first before installation.
Instruction Manual:There is no Instruction Manual, but as you can see, it is a simple structure, so you just need to push it gently into the hexagonal hole of Bolt.
View detail
Retro Style.
Ideal for creating a Retro Style. It also helps to hide Mirror's fixed Nut, which is rusting from scratches caused by tools. View detail
This is a must for off-road mirrors!
I bought this for the root dress-up when I replaced the Mirror on my CRF250RLY50 with a DRC161 off-road mirror.
This product is sure to increase the overall Off-road feel.
However, when using CRF250's 161 off-road mirror, it is necessary to pull the mirror up as far as possible while expanding the upper part because the mirror's foot part is too short to tighten the fixing bolt if it is installed as it is.
New Material:Since it is a Rubber product, it can be spread out quite well, but it is considered that sufficient care should be taken to avoid the possibility of it being cut if it is spread out too wide.
View detail
It's cheap and looks great!
[How is it used?
I installed it because I thought it would rust if I could see the Screw part of the Mirror.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
We will install them together when we replace the Mirror, but it should be easy to do.
How was your experience with it?
No problems at all, it works and looks Refreshing.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular. It seems to be durable.
View detail
TANAX M10 Mirror Bolt Cap
About quality and texture - Top quality. Smooth surface finish on these black plastic caps form TANAX. About the feeling of use - They fit perfectly into the countersunk allen head bolts I had fitted to the mirror mounts when I swapped from the lollipop mirrors to barend mirrors and the caps have now finished off the mirror change beautifully. Products to buy together - If you are looking to blank off the original mirror mounts you will also be wanting to have a pair of barend mirrors in your Webike shopping cart also. Difficulty of installation - A very simple installation process of just pressing them in firmly but I also like to add a little silastic sealant so they don't move over time with the engine vibration. Cost performance and comparison with other products - Extemely cheap solution to the unfinished look of having open bolt holes in your field of vision while riding. No cheaper option that I could see but plently of CNC machined fasteners at a higher cost here on Webike if you aren't happy using plastic caps. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - These M10 mirror bolt cap are sized to fit into the hole on top of the bolt and not the bolt hole itself. View detail
It'll make you look good!
I used it to cover the Bolt hole in my Tanax OffsetHolder! Looks like a Large thing! I didn't have the right tool on hand, so I had to remove the Mirror from the OffsetHolder.
Cap should be fitted only after the Mirror is properly angled and each part is firmly fixed! I thought the price could be a little lower. I thought it could be a little less expensive!
View detail
Don't get the OEM feeling with Bolt's Cap!
I added the Side Mirror Base and bought a special Bolt cap.
Quantity:It was 1 Set of 2pcs. (Side Mirror Base was sold one piece at a time, so I made a mistake and bought 2Quantity.:(I've bought a Set... sweat)
I am satisfied for this product.
Maybe it could be included with the Side Mirror Base! Am I the only one who thinks that? (laughs)
View detail
It is the same manufacturer, so the delivery is very good.
Bolt with Cap will hold water.
You don't want to see it rusting as it is often in your view.
It fits the Bolt well and the outside diameter is just right.
I think it's a little expensive for resin Parts.
View detail
หากต้องการความสวยงาม สิ่งนี้ จะทำให้หัวน็อตกระจก ดูโดดเด่นยิ่งขึ้น View detail
Enhance a retro look
Not only they look good and enhance the vintage look of your bike, they also help hide the untidiness and rust around the screws and bolts. I guess they fit all Napoleon mirrors. Considering the price, it's one of those 'why not' items that you should buy to show you care for your bike. View detail
Once received the goods. SA-12
Once received the Napoleon SA-12. Products are similar. Good quality product, installation is very easy. Reasonably priced work pieces and fast delivery. Easy to use, one size fits . One color in use and very good packaging. One set of Two pieces.The production of japan. View detail
Once received the goods. SA-12
Once received the Napoleon SA-12. Products are similar. Good quality product, installation is very easy. Reasonably priced work pieces and fast delivery. Easy to use, one size fits . One color in use and very good packaging. One set of Two pieces.The production of japan. Overall very good. View detail
It is for the purpose of concealing the hole of Cap bolt
I purchased to hide Cap bolt's hole
It's relatively easy to fit, but if you remove it this time it's a bit hard
Slotted screwdriveretc. You can easily come off if you let it happen in
In that case please be careful not to scratch the thing to remove
Also if you wake up strongly it will fly away so be careful
View detail
Bought with BAREN Mira - Bolt's hole purchased together Hidden
Ideal for hiding Mira-Bolt holes.
I think it's pretty good so I do not think I can get it unexpectedly.
It's a bit of a thing, I think it looks pretty refreshing as it appears.
It is good for prevention of dirt of Cap bolt hole by dust and Garbage ingress,
Since Mira is Plating, it is obviously purchasing a thing of Plating.
I am really satisfied..
View detail
this is good!
Exchange with the company's Custom square mirror
When attaching, remove Screw of the Mirror part and pass it through Bracket and it is wearing
After image Left is attached
Right before installation
If you do not attach this, it looks like it is not good ...
Something on rainy day is raining from the gap
It solved it all!
I think that there is liking in appearance, but it is good with an OEM look!
Afterward Universal's Wind Screen
When buying cheap things here, Mirror Adapter is also rough and making color is Silver color and ...
Well, it is cheap like the price
It is planned to transplant what was attached to APRIO as it is, but this is also good as just to hide that cheesy Mirror Adapter with this Stay boots!
Until before I removed the OEM and transplanted the OEM attached, but there are also OEMMirror that I can not do so it is awesome to say that these items are being lineuped
Mirror Please come along with us!
Recommendation!
View detail
Tanax Napoleon On Mirror Cap
When I installed Tanax Napore OnBARENTT, I did not mind at first, but I started worrying about the part of Bolt being exposed, it was also a place to see it, it was a place that I could see, Rust prevention and appearance improvement I bought it with. I am self-satisfied, but I think that it would be better to purchase them together when purchasing Mirror.
View detail