Reviews
Neat appearance. Prevents rust caused by raindrops.
Removed the cowl mirror from CB400SB and replaced it with a handle mirror. At that time, I replaced it with TANA-X Shark5. I couldn't bear the uncomfortable feeling like a snail when I rode SUPER BOLDOR for the first time, so I spent a large amount of money to replace it with my favorite mirror.
However, because of the cowl, I could not easily install it, so I even bought a Tanax Adapter or something like that, and finally got it to fit nicely. Finally, I was able to fit this cap.
The product is good, of course, but I think it is a little expensive if it is stolen or falls off due to vibration. If it were a little cheaper, I would like to cover various places properly.
Please give us a discount. Also, please give us the smallest size.
View detail
It is casually MORIWAKI.
I was not happy with the snail-like cowl mirror on my CB400SB, and when I replaced it with a handle mirror, I bought a MORIWAKI one to fill the original hole. At first I ordered a cheap one from Amazon.com, but they didn't have the color I wanted, so I decided to go all out and get MORIWAKI anyway with WebikePoint.
It is a rather nondescript cover with a black matte finish, but since it is a MORIWAKIDesign (I don't know much about it and it is not Mania), I decided to go with it. As I have said many times, it is nothing special, but I think it covers the Mirror Hall in a subtle way.
View detail
Thanax M10 mirror bolt cap
Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install.
If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top.
Webike delivery and packaging are in excellent condition. Thank you. -------------------------------------------------- -------- Quality and Texture Information The feel of the plastic product is clean. Products purchased together TANAX: Off-set Holder 45 is easy to install. If you install it alone, you will be able to prevent problems that occur due to the bolt fixing part being exposed at the top. Webike delivery and packaging are in excellent condition. Thank you. Powered by Google Translator
View detail
Fits: HONDA CBR1000RR-R, HONDA CBR1000RR-R, HONDA CBR1000RR-R SP
Bolt does not fit
Bolt is too long and cannot be fixed. I added two additional Washers to accommodate this. View detail
inconspicuous (Compliment.)
The quality is high!
I chose Black to give a sense of unity, but with this size, you may want to use a flashy color as an accent color.
The price is for one, so I think it is a little expensive, but I am satisfied with it.
View detail
inconspicuous (Compliment.)
Perfect Fitting View detail
Mirror Hole Cap
I bought this to hide the Mirror hall as I changed my CB223S to a Bar end mirror.
Note that the quantity is 1 pc.
If you value cosmetics, you can use Homsen Screws or Vinite.
The texture is good
View detail
How is this possible?
I was surprised when I opened it! I wonder if this is made of wood. I can't believe it's wood to the touch. It is indeed light, but.., View detail
Back Mirror Fixing Section Protection
I have been using it to protect the back mirror fixing area and prevent rust, but it has deteriorated and will be replaced.
It hides the root of the fixed part and does not look bad.
I wish the selling price was a little lower.
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA Rebel1100, HONDA Rebel1100 DCT
Mirror Fill-in Bolt
Mirror holes are not used on the clutch holder side, so we filled them here.
The black color is similar to that of the Holder, and I was able to install it without any discomfort.
View detail
TANAX M10 Mirror Bolt Caps
125 years old, 125 years old, 125 years old.
I want to know more about this.
I bought the genuine Monkey 125 side mirror because I couldn't see the rear clearly.
After installing the offset holder, the mirror viewing angle will be good, allowing you to see what's behind you and drive safely. -------------------------------------------------- -------- The side mirror of the genuine Monkey 125 was purchased because it could not show the rear. After installing the offset holder, the mirror viewing angle is good, so you can show the rear so you can drive safely Powered by Google Translator
View detail
For off-road motorcycle Mirror Hole Plug
Used for Mirror Hole Plug for off-road motorcycle.
I often remove Mirror when participating in Races, etc., and wanted to prevent mud, etc., from clogging it.
There are many inexpensive Color line nap products, so it would be useful to have a few.
View detail
arrangement
Quality and Texture Information Plastic Products It's neat to look at the feeling of use Products to purchase together TANAX: Off-set Holder 30 [SA-23] It's easy to install Cost performance and comparison to other products TANAX M10 Mirror Bolt WeBike packaging is always great, arriving in a week for delivery and packaging Concerns about purchase TANAX: If you purchase Off-set Holder, you can neatly organize the purchase together View detail
Fits: HONDA Rebel 1100, HONDA Rebel1100 DCT, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER BOLD'OR
daytona mirror bolt
The packaging from WeBike was very thorough. The mirror bolt is much lighter than expected and the build quality is excellent. I purchased the titanium color and installed it on the CB400SB. It fits well like a genuine product. I intend to purchase again next time and recommend the purchase. -------------------------------------------------- -------- The packaging is very meticulous in the Wybike. The mirror bolt is very lighter and more built than you think. I bought a titanium color and was mounted on the CB400SB. It looks like a genuine product. Next time, I am willing to buy and recommend purchases. Powered by Google Translator View detail
Good product with good design
I installed it on a 2014 s1000rr.
I bought it to use as a bar end mirror, but it is simple and blends in naturally with the design.
Installation is easy, just tighten 4 screws.
The quality is reasonable and I am satisfied with the product itself.
View detail
Fits: SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-10, APRILIA CAPONORD 1200, APRILIA DORSODURO1200, APRILIA TUONO V4 1100 Factory, BMW F800GS, BMW F800R, BMW R1200GS, BMW R1200GS Adventure, BMW S1000R, BMW S1000RR, DUCATI DIAVEL, DUCATI HYPERMOTARD1100EVO, DUCATI HYPERMOTARD1100EVO SP, DUCATI HYPERMOTARD1100/S, DUCATI HYPERMOTARD796, DUCATI HYPERMOTARD821
Great looks. as a cap bolt….
Do not over-tighten or apply Screw lock agent by mistake, as the material is material and will quickly lick the hex holes.
I want to install it firmly because it is for fixing Stay which supports important parts around Handlebar ….
View detail
OEM Parts Flavor
[How is it used?
In conjunction with the conversion of the Mirror on the 390DUKE to an Other Brand Product, we decided to use the Tanax Off-set Holder 45 (product number:SA-25) to improve the Mirror's visibility, I installed this product to prevent water from collecting in the hexagonal holes of the bolt and rusting.
Was the one you received as per Image?
Material:It is a Plastic Cap. If you handle it roughly, it looks like it will be damaged soon.
Was the installation difficult?
There are no claws attached to prevent it from falling off, but it is a little tight-fitting so that it will not come off immediately. I tried to remove it once as a test, but it was quite difficult, so I don't think it will come off without permission while driving.
How was your experience with it?
I am satisfied with the finish as if it were OEM Parts.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang for installation:If the cap is pushed in at an angle, it will break. if the inside of the hexagonal hole is already rusted, it is better to remove the rust first before installation.
Instruction Manual:There is no Instruction Manual, but as you can see, it is a simple structure, so you just need to push it gently into the hexagonal hole of Bolt.
View detail
When running Circuit.
Purchased to cover up the area where Mirror was removed when driving on Circuit.
Good because it looks Refreshing and Race ish.
Mirror removal is easy as you just use Bolt instead of Mirror.
View detail
Retro Style.
Ideal for creating a Retro Style. It also helps to hide Mirror's fixed Nut, which is rusting from scratches caused by tools. View detail
Used with Mirror-less
It was used in the area where Mirror was removed for Racerization.
The texture is cut-out and has a nice, luxurious feel. However, I chose Black because I don't really want it to stand out too much.
I don't have to worry about it, but I think it would be better to have custom parts.
View detail