Reviews
10 mm Mirror mounted on 8 mm body
GILERA RUNNER is 8 mm Natural Thread Screw for the body side,
I bought this Conversion Adapter.
Body body 8 mm Normal Thread Screw → Mirror 10 mm Normal Thread Screw
Conversion Adapter.
Quantity : 1pc. Quantity : Pair (for Left and Right) When exchanging with,
Quantity : 2pc. Set Please note that it is necessary to purchase.
The feeling attached was not particularly problematic.
View detail
Fits: YAMAHA CYGNUS X, YAMAHA CYGNUS Gryphus
To Yamaha car Right Screw conversion
Purchase when replacing BWS 125 Mirror with UniversalMirror.
It's Y's Gear OEM so it's not possible either.
About Yamaha type Scooter think that UniversalMirror will be attached by conversion of 8 mm → 10 mm but as a precaution we recommend to measure Size before purchase.
View detail
Backward batch
【What made you decide the purchase?】 Required item
The price is cheap, various types (diameter - Opposite Thread Screw etc) Variation can be selected.
【How was it actually used?】 Required item
After use, backward confirmation can be done firmly.
【Was it difficult to install? (Hard parts case)】 Any item
Easy. Just turn it
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any item
Slowly fix to the desired height so that it does not thread obliquely, fix it with tightening Nut.
[Is there anything I was disappointed about?] Required item
There is absolutely no.
【Hope for Manufacturer - Please let me know if there are any improvement points] Required item
I think that it is convenient if there is an adjustment width of a little more height.
【Have you compared items?】 Required item
KTMPowerParts also sells parts of the same function, but here there is military presence on this product.
View detail
Because it is a Yamaha car
【What made you decide the purchase?】 Yamaha car to install Mirror with no reverse screw setting
【How was it actually used?】 Goods without mistakes
【Was it difficult to install? (Hard parts case)】 Easy
【Please tell me the point of installation and hang (in the case of Hard parts)】 nothing special
[Is there anything I was disappointed about?] nothing special
【Hope for Manufacturer - Please tell me if there are any improvement points】 I want you to set the reverse thread to Mirror rather than to this product
【Have you compared items?】 We decided to make Tanax safe though considering Manufacturer which releases reverse thread screw adapter
View detail
I made it same Manufacturer as Mirror
Cheap Stainless, Silver colored things are rolling around the house ...
Anyway, I tried to make it the same Manufacturer
Since I attached Stay boots after this, I can not see it ... w
If both Mirror and Adapter are those of Napoleon company, it is good to have a sense of unity!
Until now I have attached Adapter or whatever I'm rolling appropriately as it is good for now, but as expected I thought that Silver color Adapter in BlackMirror ...
Scooter is often hidden by Stay boots, but it is a place that you can see as a normal Mission car
Recommendation!
View detail
It is essential for Yamaha cars.
I want to replace the Mirror of the OEM Product because it is broken, but Yamaha car needs this part for Opposite Thread Screw. Since installation is fine without problems, I think that Motorcycle with Cover attached to Handlebar such as Scooter will also be attached without problem. View detail
Napole OnMirrorAdapter 8 mm to 8 mm
I attached it to AF 27 type SUPER DIO. Made in Taiwan's cheap Cowl, the original is bent, the interference got bigger, so I chewed the Adapter and made it easy to install Mirror. It was as expected, but it may have been good to set it to normal size, from 8 mm to 10 mm.
It is satisfactory once.
View detail
Does the job
Bought this again、 to finish my installation of mirror. Very good chrome layering. View detail
I bought it for a slightly different purpose
I bought Handguard with Bracket I bought at Home center, but because the center of Hand guard and center of Handlebar do not match, I bought it for raising Hand guard with this Parts.
Although the purpose is different, Plating and finishing are beautiful and satisfied.
Mirror got somewhat shaky, but for Hand guard, Mirror itself is attached.
As Mirror got out a little before, I think that visibility has become narrower, but the impact is Small..
I think that Mirror's position adjustment can be used without problems.
View detail
Great adapters but be aware...
Be aware that in this set of 2 adapters、 only 1 of them are counter-clockwise to clockwise. The other adaptor is simply a clockwise to clockwise and meant only to bring your mirrors up to the same height.
My Japanese reading skill isn't that wonderful and only realize my mistake after I had already confirmed my online orders. Haha!
Other than that、 theses are great thread adapters! Buy them!
View detail
I am using it for commuting motorcycle.
Judging from the image Quantity : 1 Set of 2pcs. It looks like Quantity : 1pc. is.
Performance is particularly different from cheap, but it is a nice thing not to rust even if it is used longer than Black iron or SilverPlating.
Strongly speaking, it is difficult to match colors with other Parts.
View detail
Without this it is impossible for Yamaha cars.
The Mirror diameter of CYGNUS is 8 mm.
Since 8 mm Mirror is few in the Other Company Product, it will be looking for 10 mm Type.
Therefore, this Opposite Thread Screw Adapter which is peculiar to Yamaha is necessary, and this adapter of 8 mm → 10 mm Opposite Thread Screw is necessary.
When ordering, look carefully on HP's Manufacturer 's HP
Large thing is to check well that there are no mistakes.
Let's be careful because it seems that there are too many types and there are no translations.
Left Side Spacer of just height is bundled but Quantity : Pair (for Left and Right) I think that it is a conscientious Manufacturer's consideration because it is essential to change Mirror.
View detail
Required for Yamaha cars
I purchased Napole OnMirror at the same time. I tried installing Motorcycle's Mirror attachment part was not very good, but it was easy to install and it might be good as a product. It would be nice if Mirror itself had Opposite Thread Screw setting if possible. View detail
Why is there - - -
I offset Mirror and did not want to raise the height as much as possible so I bought this product.
The goods themselves are good things and it was possible to install as intended, but for our YAMAHA car installation we need two kinds of Right Screw and Left Screw, naturally we purchased it like that, but the attached car body The side fixed Bolt shape is "Mushroom type" When "Horizontal Type" Different shapes of.
I thought which one is better to look at which one is better, but it seems that it looks a little too different - - - In that respect, ☆ I made one Minus.
View detail
It is easy to see as expected
When you attach the Back Mirror to the structure of the car body, you can see your shoulder, Mirror 1 / Although it could not be confirmed backward by only about 3, this adjustment Coupler 10 MM → 10 MM height was up by 3 CM as it was able to check backwards perfectly.
Also at Lineup Yamaha Opposite Thread Screw → Normal Thread Screw
8 MM -> 10 MM From 10 MM to 8 MM, there are various Lineup, so purchase Mirror (Diameter) For those who failed, it is also a recommendation for those who purchased UniversalMirror with Yamaha car.
Recommended for vehicles that can not be confirmed backwards.
View detail
To the height of Mirror
When my car is wearing Mirror of normal height, Mirror is low and the back is not reflected at all.
I bought it for height adjustment of Mirror.
This item is 8 → 10 - 10 → 8 10 → 10 - Variety such as Opposite Thread Screw for Yamaha → Normal Thread Screw is abundant - I think that it is very efficient.
View detail
When Mirror relocation to company Mirror Holder
Used to relocate Mirror from MASTER and attach it to the company's Mirror Holder.
Because Z800OEM's RightMirror is Opposite Thread Screw, the company's Mirror Holder (M10 positive) In the meantime, it was necessary to install the Conversion Adapter in the meantime.
A manifestation of various Manufacturer's things, Material : I arrived at this product which is Stainless Steel but low price.
- Almost satisfied regarding installation.
The texture is good, it is enough length to cover the Rubber cover attached to Mirror, so Adapter can not be seen from the outside world.
- The position of Mirror also got a little high, and the visibility seems to have improved somewhat.
View detail
Defective item?
I bought Normal Thread Screw 10 mm, but it does not enter one side. I can not replace it on the way.. There may be individual differences.
I am disappointed. Standard's Screw, Quantity : Pair (for Left and Right) I do not get misunderstood because it enters in a positive 10 mm.
View detail
I used a 10mm->8mm adapter for a Cub. The quality, especially the coating is great. It hasn't rusted although it's been left 5 years out in the rain. However, the inner side will rust. I couldn't remove adaptor from the mirror because of the r
I used a 10mm->8mm adapter for a Cub.
The quality, especially the coating is great. It hasn't rusted although it's been left 5 years out in the rain.
However, the inner side will rust. I couldn't remove adaptor from the mirror because of the rust.
I used a large wrench to remove it but it required quite a bit effort.
Now I now why some second hand mirrors are sold together with adaptors.
You can see how much rust I'm talking about from the picture.
I scraped off some of it but it still looks awful.
The reason why it gets so rusted is because the screw hole faces upward and has a dead end.
Water will enter screws even though they don't seem to have any space.
I advise you to coat them with highly rustproof anti-seize and urea grease before you insert them.
I'm satisfied with everything else except the fairy high price.
I don't need two. I wish they were sold individually.
View detail
i use it in adapter and height extender with DAYTONA 【70957】 for my yamaha,on left handle. item have upper hole in reverse clockwise and under screw normal clockwise.
i use it in adapter and height extender with DAYTONA 【70957】 for my yamaha,on left handle. item have upper hole in reverse clockwise and under screw normal clockwise. View detail