Reviews
Utilized for Yamaha OEM Mirror
Yamaha OEM Mirror for SR 400 (Opposite Thread Screw, previously used for WR 250X) There was a surplus, I thought that I wanted to add to HondaVT 250 SPADA, I bought it. The body side of SH 10 is Normal Thread Screw, the side of Mirror is a reverse screw correspondence product. Naturally, it was easy to install. Mirror for SR is 1 to 2 cm wide wider than NORMAL of VT 250 SPADA, good rear vision.
This VT 250 SPADA is equipped with ETC loading Bracket of Tanax. In order to clap its Bracket by handlebar, I move the Mirror Holder on the Brake side to the inside. I regained that visibility deterioration.
It is also solidly made, recommended for utilizing YamahaOpposite Thread ScrewMirror.
View detail
Mirror installation of KSR 110PRO
The acquaintance attached Mirror under Handlebar is often Parenthesis, purchase, part cut part is obviously wanted to imitate, but impression that there is no part that cuts hands such as BALI and it is not bad despite price was.
After actually installing it, I closed the Screw in the place where the Handlebar was bent, and it cracked quite easily. My mistake I did not put on the straight side of Pipe.
I finally got it like the picture below. The degree of freedom of installation is high, I think that not only Mirror but also various ways of using it are cheap.
View detail
Purchased for bulk by Mirror exchange
When replacing from OEMMirror to Mirror of Other Company Product, the height lowered and it became hard to see, so I bought it for the bulk of height earnings. It was Mirror of Japanese Vehicle Inspection Correspondence, but if you have Turner it may be useful if it is used? Because it is a product that shows its effect when you touch it Fortunately I have not confirmed the effect yet and I will keep 3 stars.
View detail
POSH Mirror Adapter
OEMMirror of MONSTER S2 is fixed with M8 Bolt. Since M10 has more choices than M8, I exchanged the parts clamping Brake and Clutch Master cylinders with for M10.
The color of Handlebar also matched and it felt tightened.
View detail
Tanax Napole for OnTANAX NAPOLEON Mirror
Purchase for height adjustment of WR's Mirror. I changed the opposite side to Mirror Adapter outside the company in order to attach Mirror downward to WR, the height of Mirror changed and Quantity : Pair (for Left and Right) The way of looking is also different, fingers were caught on Mirror even at BlinkerCancellation but this is a problem solving ◎ View detail
Ideal for those who feel strange just above Handlebar.
I installed it in KDX.
Mirror Holder of the OEM Product is attached to Mirror directly above the Handlebar, so it is necessary to climb Standing etc.. Since it can be done so far I did not attach Mirror of Left Side - - -
It is a bit awkward because it needs a certain strength, but it's heavy, but the Conversion Adapter of the Handlebar diameter is also firm and easy to install because there is the attached Wrench,
Not so much Mirror on the front side, but there is nothing to worry about in the forest road and I also like the position of Mirror.
View detail
Although it is a slight Offset
I do not like the position of RightMirror of KTM EnduroR, I want to improve the visibility of the backwards.
Although it is only a small movement, in the case of my Motorcycle, the backward visibility has improved very much.
(Depending on the vehicle. I think there is LargeSmall for interference and improvement with the car body)
It is a long hole, but it can be firmly fixed.
It feels a bit expensive, but it's Cut-out so there's no choice.
View detail
Purchased with Mirror exchange
When exchanging OEMMirror, conversion from 8 mm to 10 mm is required and purchase.
I am satisfied with the look that does not feel uncomfortable.
If you desire Quantity : 1pc. I want you to prepare the goods of.
View detail
Quantity : Pair (for Left and Right) To match the height of Mirror.
Quantity : Pair (for Left and Right) Purchase to match the height of Mirror.
Because the Space of the Mirror attachment part is narrow, we chose the one that is as thin as possible from the Black color Adapter.
Since details of each dimension are not described, it was not more than judging with a photograph, but as a result it was a product as expected.
View detail
Used for for BMW
There was for HARLEY, but I used it for old BMW. It was also perfect for Size. The choice of Mirror spreads. BMWOEM's Round Type Retro feeling is also good, but the backward visibility expands and the safety gets broader. View detail
Good
I bought it to install Stealth Mirror.
I think that it was good even if there was a little more angle.
The most dissatisfied point is the price.
With Adapter and Quantity : 2pc. I think that there is a degree in reverse price destruction of 2720 yen to buy Set.
View detail
Well as MFACTORY or something
I bought a bad product out of a certain company, but because I became a Garbage box, I knew that M Faku also sold similar Parts, and arrived at this item.
I am also solid and making Screw's Length well enough.
The price is also cheap and conscientious.
Just arriving at this item, NetSurfing happened and it happened to arrive, so I think that it is better to increase the search Tag and spread such good products.
View detail
The quality is good - - -
Although it is sometimes called Posh made, it is not bad about the quality aspect, but because Screw 's adjustment range of the car body side has been made wider, the Screw will loosen only by fixing the Screw head alone.
I think that it is necessary to bite Rubber Bush as a countermeasure and make it harder to slip.
View detail
Cheap to use
【What made you decide the purchase?】 Low price
【How was it actually used?】 good. Useable. Simple.
[Is there anything I was disappointed about?] At the time of temporary fastening, the attached Bolt could not tighten the hand. It was a work at a time but I felt uncomfortable.
【Hope for Manufacturer - Please tell me if there are any improvement points?】 Improvement of Bolt, Tap.
【Have you compared items?】 None
[Others] It attached to KDX 125 SR purchased in second hand.
Mirror used what I had in home Garage.
View detail
Product itself is not bad
I attached it to the MONKEY's normal mirror but the height became high and Balance became worse 2 - I think that the product itself is not bad it was removed in 3 days View detail
It got better as expected.
【What made you decide the purchase?】
I purchased it because it can easily raise Mirror height.
【How was it actually used?】
You can now check backward with Mirror definitely.
【Was it difficult to install? (Hard parts case)】
Just by removing Mirror and incorporating it in the root is easy.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Optionally you can change the height of BoltScrew mountain. It's easy because it's DoubleNut.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
View detail
It is a good product without particular problem
I bought it for Opposite Thread Screw for YAMAHA car to be Normal Thread Screw but because it was Opposite Thread Screw → Normal Thread Screw for explanation, I thought that Opposite Thread Screw would be Normal Thread Screw, Normal Thread It was to make Screw an Opposite Thread Screw. I would like you to clarify the explanation a little more.
I have not seen it well though it is bad... Hereafter care.
View detail
As expected
【What made you decide the purchase?】
Price and function
【How was it actually used?】
You can now check backward firmly.
【Was it difficult to install? (Hard parts case)】
Easy by turning
【Please tell me the point of installation and hang (in the case of Hard parts)】
It is also possible to fit to any height.
[Is there anything I was disappointed about?]
There is none
【Hope for Manufacturer - Please let me know if you have any improvement points]
I think that the price is high.
【Have you compared items?】
There is none
[Others] Any item
View detail
It's neither good nor bad
I bought it for height adjustment because my arms are reflected in Mirror. The building is solid and the price is reasonable and it is as good as Title as possible and it is not impossible. View detail
Opposite Thread Screw correspondence
Purchase because I wanted to install DAYTONAMirror.
Although it is a plain part, it is a product that seems to be good to make well.
When purchasing it is Opposite Thread Screw correspondence or it is necessary check!
View detail