Reviews
Cost performance is good.
It was the cheapest one I found, but there was not any problem with the installation.
There is a gap on the lower side, but even if it is too tight, it will not be possible to tighten it,
It is this.
I used Adapter for Mirror so far, but the tightening to Handlebar is sweet,
As Mirror collapsed at high speed, it was not good.
This reduced the number of parts to Handlebar by one and it became clear.
View detail
Rear vision improvement
If you put this product between Mirror and Turner of Tanax CROSS 2, it spreads sideways
The back looks better. There was no increase in blur of Mirror before entering. Since Silver stands out, I wanted to buy a black iron color if there is one.
View detail
I think that construction is also beautiful.
I bought it for height adjustment. Although there are various, since I felt the most beautiful construction, I chose Tanax.
I am satisfied because it plays a solid role.
View detail
Quantity : Pair (for Left and Right) 1pc. One by one
Entering number 1.
For Left Side's Adapter only Quantity : 1pc. Is it?. Or Quantity : Pair (for Left and Right) Is it in ??
I confirmed to WIBIKE, but Quantity : 1pc. Because it was an answer, Normal Thread Screw side also purchased.
After all, Quantity : Pair (for Left and Right) 1pc. One by one (Lol)
I think that explanation and inscription is insufficient..
Installation is not problematic as long as proceeding according to the Instruction Manual, but there seems to be a little hang.
View detail
The height got out and Mirror became easier to see.
I had attached Mirror damper of POSH so far but it got broken.
I was looking for an alternative. Mirror damper was sluggish for this.
There is a height, Mirror is also easy to see.
View detail
Excuse me
It is an ordinary item. Material of hundreds of yen : Stainless Steel is not much substitute compared to other Manufacturer. Because it is a product of hundreds of yen. View detail
Good!
Bought Black Back Mirror Including height adjustment Prompt decision purchase!
Spacer as well Height is exactly good so the coloring is perfect!
I think that it was a good shopping.
View detail
Mirror high
At the time of handling, Left's Mirror hits the arm at all times and Mirror moves sometimes, so I bought it for fixing a little high. Yamaha exclusive use Quantity : Pair (for Left and Right) I bought it with. View detail
Pay attention to mistakes buying! Let's see the plan of the product!
I misunderstood the information on the product name of Tanax and received it, mistake in purchase (Upside down Screw diameter) I did it..
In Tanachi "M8 -> M10" Is an adapter that converts M10 to M8.
ProductNo for those who want to make LITTLE CUBM 8 OEM Mirror M10 Mirror 【C-1 or CM-1】 Is correct. C-2, CM-2 are wrong.
I was convinced for the first time by looking at the image of the plan view at Webike to buy again.
Originally the product title of Tanax is confusing.
Although I commented as a bad point, the expression method of the product is too bad.
In this case buy mistake victims should come out. (I gained momentum for Large on other purchase sites)
The product is just installed, so corrosion resistance is the future verification.
View detail
Visibility improved
I exchanged Handlebar from American to Separate and the height was low and the visibility of Mirror got worse so I installed it.
It is about 20 mm higher, contributing to visibility.
Since the surface is black dyed, it is easy to rust after tightening with Wrench.
View detail
Used for Rear suspension extension
Commerce Product No 9321.
I used it to extend OEMRear suspension of old and new Dio 110, PCX.
Only this adapter can be + 10 mm.
View detail
Looking for ease of view
I installed it on MONKEY.
Mirror has changed shape,
Because it was difficult to check backwards
Since it was that the range that can be seen increases as the height is raised, I bought it.
As a result of installing, I think that feeling became easier to see.
The part where the shoulder was reflected so far became visible to the back, so it is not bad.
However, it is not SMART as an appearance.
Although it is 20 mm Up, there is a feeling that it has been upgraded as it is.
However, since you can also choose the color Black and Plating, you can choose according to Mirror.
I think that it may be cheaper to make a little more gold.
However, since it is a gold amount that does not hurt even if you think that it is subtle, it may be that you try someone who is hard to see Mirror now.
View detail
It's 3 centimeters long and 3 centimeters away
I only saw my arm until now, so I was thinking of Offset. Since it can move only about 3 cm with the Adapter attached, it was uneasy how effective it is until installation. I can see the backward firmly except for. Because it is expensive Parts, it was good not to fail.
View detail
Visibility improved and satisfied
I am satisfied with better visibility.
To illustrate It is sold by piece. Because I did not write it I ordered only one.
If you order another one, it costs a shipping cost and it becomes a high thing, Quantity : Pair (for Left and Right) It is hard to use the things with different heights, the worst.
I'd like to order together when ordering something. Until then, I'm tolerant at the height that I can not see until now.
View detail
It is necessary to install Mirror in GROM
It is necessary when Mirror is installed.
It interferes with Right Side 's Brake fluid tank, so this part is needed. Right Side I do not need it, but it looks so inclined that both are necessary.
Screw attached when attaching Mirror (hexagonal) Do not tighten Bracket directly with Spanner as you will be tightened at !! It will be full of scratches.
View detail
It is necessary for safety and white by tracking measures!
Please install it on a vehicle with a low Mirror position.
Since the position of Mirror rises by 10 cm, visibility improves and it is the best product for safe driving. * It will be easy to notice even in the tracking by White by.
Compared to Mirror's male Screw's length, the product's male Screw's length is slightly shorter. If it is 3 millimeters more, it is a 5 star..
View detail
I should have done it from the beginning
Neck was expensive everyone's impre street.
It's higher than popular Mirror selling here.
I purchased an inexpensive competitor OffsetHolder, but I can not move to the position I expected but another Size is already Quantity : I purchased 1 Set.
As a result, it is short and long in the belt...
I was able to install Mirror at the position that I thought to buy just one item of this product by any means.
A total of 4 items of wasteful company.
This Quantity : 2pc. It has become price equivalent to Set.
I feel that Design is also better to this person.
After all, the product to change Position is useless unless you have the adjustment function.
View detail
Installed with Mirror of Mukawa in Grom
It is only 2 centimeters, but I felt it changed quite a bit. It is my impression, I think that it became a little safe.
Originally, Mirror of Grom is a round type, but it is changing to a long side. As you can confirm the backward without dropping the line of sight a little, as you can see the back at the height close to the shoulder, by thinking that Mirror is upwards, I think that the reflection of the arm will decrease a bit and replacing it Was.
In addition, somehow, I think that I can ride my posture well.
I do not even feel that the tremor is great. (I think that it also affects because I attach Handlebar Brace and Hand guard. )
View detail
Purchase by rust prevention
I tried to attach MIRROR made by Tanax to MAJESTYS via Takatsu's anti-theft adapter and it was not possible to attach because Screw diameter did not match. (I am not good at checking myself, but - - - )Quantity : 1pc. So Left Side 10 mm positive → 8 mm positive, Right Side 10 mm positive → 8 mm reverse (Mirror → Motorcycle) I bought each. Installation was fixed with a high strength Screw loosening prevention adhesive so as not to be stolen from the root.
Material : It would be nice if there was a Black of Stainless Steel.
View detail
8 mm to 10 mm
I will convert the diameter of Screw at the base of Mirror, but since it was attached to Mirror, I did not use it after all.
However, if it has this, it may be quite useful. I can use it in other places.
Making is good.
View detail