Reviews
Cheap with Chrome plating
Replaced with a Plating Mirror and put it in the same Chrome plating Adapter Changed, there is no plating failure etc. which is common in cheap ones, and pre-treatment of plating The post-processing is well done, no unevenness, no swelling, no fogging, and the forging process is well done It is a good buy at this price I believe that a motorcycle that is well cared for can keep its quality for a long time It is very comfortable to use with a domestic plating mirror The shortness of the mirror and the length difference between the other side of the mirror without an adapter is very noticeable It fits in the Small limit View detail
Rearward vision is now better
The Z900RSCafe is supposed to be a Short mirror than the regular Z900RS Quantity:Pair (for Left and Right) away
Therefore, rearward checks while driving are not required for Quantity:Pair (for Left and Right) I had to shake my head quite a bit at
When I was getting a reasonable amount of Speed, I couldn't get a glimpse of the eye feed and it was Stress
That's why the old-time flyers used to use short mirrors, and I've been using short mirrors myself mirror
But this time it's too short, so you can see your shoulders in the background needed
At first, I held back on the quackery, but the urge to get the Mirror out three more inches made me buy this one I did
Rearward vision is so much better and the visibility is a perfect balance
At first I thought it would be an inexpensive one
I chose this one by AluminumMachining because it is still a very visible place The quality is high and I am satisfied with it
However, this product is more expensive than MirrorBody, so the quantity:Pair (for Left and Right) It would be great if you could make it about $3,000 in
It's important to note that the Body is highly textured, so
Bolt is also included in Included Parts:I wanted to use the Bolt for something more substantial It was a bit of a struggle, but
What I found out at the time of the temporary clamping is that the Bolt for Mirror is a normal way to get Pitch It's not like Bolt's Pitch
The Bolt that I bought cannot use the Bolt that I bought with great effort, and it became a Waste use After all, I used the included Bolt
View detail
That's Tanax
I figured if I was going to buy one, it would be Tanax!
Left SideMirror inevitably interfered with the Left SideMirror, so I installed it
It is thick and of good quality
View detail
Nice Screw Adapter
This TANAX Left-Handed Screw Adapter is very useful. It allows me to lift up the mirror a little bit, and to allow me to install a mount between the mirror and the screw adapter. View detail
If it becomes a reference at the time of Dorareko installation to CB 400sb
Purchase for adjusting the height when attaching the Dorareko to the Mirror hole.
Regardless of whether or not, the Bracket of Cowl mirror is reflected, so it is better to put the Dorareko in a different place.
View detail
Some people need necessities
Unnecessary for people who do not have trouble with OEMMirror
For those who want to replace Mirror with purpose
We bought to attach the mirror folding Mirror to SEROW
Since I wanted to use Mirror as it is with Honda SL 230, my previous car contributed to Reduction in cost
Because Merit and Demerit are products that differ considerably among people, I want you to think well and purchase
View detail
Fits: BMW S1000R, BMW S1000XR, BMW F850GS Adventure, BMW S1000R, BMW S1000XR, BMW F750GS, BMW F850GS, BMW RnineT, BMW F800R, BMW F800GS Adventure, BMW F700GS, BMW F700GS, BMW F800R, BMW S1000R, BMW RnineT, BMW R1200R, BMW R1200GS, BMW F650GS, BMW R1200GS, BMW R1200R
If you use Original parts
Accuracy as Parts is sufficient, there is no dissatisfaction.
I can not deny that the handlebars are slightly noisy, but it certainly makes it easier to check backwards.
View detail
Although it is a repair item.
Purchased with Single Body to replace from Mirror Holder for SS. Like brembo, I feel like I do not understand a little about price like Mirror Holder like this.
Unlike Brembo and Koken's MASTER and Holder, it is structured to be attached by Hinge, but the reason why Hinge is better is not found honestly. It feels like useless structure just for product differentiation. I do not know the need to do Quick Release?.
The operability of the Wire Clutch Holder Body itself is good, just a waste?.
View detail
Orthodontic rearview mirror adapters have many uses
With this adapter, my PCX rearview mirror can be used on other cars, so that some orthodontic modified rearview mirrors I bought before are also useful, and can be installed on all orthodontic rearview mirrors. There, even if the rearview mirror is damaged, you can immediately replace other styles of rearview mirrors, and the price is affordable. With this adapter, my PCX rearview mirror can be used on other cars, so that some of the orthodontic rearview mirrors I bought before are also useful, and can be mounted on all orthodontic rearview mirrors. There, even if the mirror is damaged, you can immediately replace other styles of rearview mirrors, and the price is affordable.(translated by Google Translator) View detail
Fits: BMW R1200R, BMW F800R, BMW F800R, BMW R1200GSLC, BMW F650GS, BMW RnineT Scrambler, BMW RnineT Pure, BMW R1200GS, BMW K1300R, BMW K1200R Sport, BMW RnineT, BMW R1200ST, BMW K1200R, BMW F700GS, BMW F800GS, BMW R1200GSLC, BMW F650GS, BMW RnineT Scrambler, BMW RnineT Pure, BMW R1200GS
AC Schnitzer's rearview mirror extension adapter is good
My F700gs has always felt that the original rearview mirror has a too narrow field of view and I want to change the extension, but the original one is too expensive. Fortunately, I found that webike can find the ACS extension adapter. After installing it, it will be released. After a lap of the car, the field of vision was wider than before, and it was more confident when changing lanes and turning. I could better observe the situation behind the car. My F700gs always felt that the view angle of the original rearview mirror was too narrow. I wanted to change the extension, but the original one was too expensive. I found out that webike can find the ACS extension adapter. The car tried back in a circle, the field of vision was wider than before, changed lanes, and there was more confidence when turning, so that you can better observe the situation behind the car.(translated by Google Translator) View detail
This is not it
I wanted to pretend a bit of hangSR 400, which I have gotten for 30 years, to myself a bit, but now it has been replaced by the small type Mirror of Round Type.
However, visibility is bad.
So, I looked around and reached this product.
Everyone says that the price is high, but this processing is probably manual. Welding is difficult, is not it.
Visibility is properly improved with this kind of Bimmy angle, it looks like it is not bad at all, I will evaluate it.
View detail
Build it.
I used it as a Bracket of the retrofit Tachometer.
Several companies have issued Bracket for Handlebar, but it is expensive or Large. This is TANAX 's thin and thin and processing accuracy is high. It seems to be hidden for Mirror, but it can be used as a universal product for many purposes.
View detail
Good Material
Size reduction adapter for side mirrors from 8 mm thread to use with 10 mm mirror mounting holes, packaged in pairs. comes with washer The weight of the converter is good, the material is strong, the black color looks thick, the threads are sharp and look strong. Don't compare with cheap Chinese. Spirals tend to fall easily. Tanax Napoleon is a reasonably priced brand. I have checked several converters. Recommend this one for a good price. You won't be disappointed. Screw joint for 8 mm screws, for use with 10 mm. Packed in pairs. Available with secondary ring. The strength of the converter is strong, the material is strong, black, thick and strong. Do not compare to China's cheap. The thread is often falling easily. Tanax Napoleon is a brand that is reasonably priced. Check out many converters. Recommend that this price ok not disappointed. (Translated by google translation) View detail
It rusted to me.
The inside was rusty.
I bought 10 millimeters of Mirror at the same time as 8 millimeters of car body and it was also rusty so I wonder what kind of Meter it is.
View detail
Necessities
I bought it when replacing Mirror on WR 250 R.
Since Mirror I purchased was the Type of Common for Left and Right,
We need this Adapter.
Adapter mounting height increases,
Can be used without problems.
I think that it is convenient because various conversion types are out.
View detail
Goods are good !! But it is expensive
Quantity : Pair (for Left and Right) I bought minutes and it costs 4000 yen! I think that the cost is hundreds of yen.
The product itself is very good. I really regret that being high! I wanted POSH to work harder and cheaper
View detail
The attached Bolt ,,,
The included Bolt was easily torn off during tightening.
Let's pay attention to Torque at tightening.
Other than that I think that it is an excellent product for Cost performance.
View detail
Mirror in sight even if looking forward
There is a car that makes an unreasonable overtake while riding in the flow of the roadway, I felt the danger.
If you know in advance you can respond with confidence, but the CUB's boarding posture is high,
Since Mirror is not in sight, it is rare to notice the following car reflected on Mirror with the forward line of sight.
With this product 10 cm and Windshield base 4 cm,
When Mirror position is raised 14 cm, it is now possible to capture the backward in the corner of the field of view with the forward line of sight.
Also, the action of seeing Mirror became possible only by eye movement without moving the neck.
It has definitely diminished the ability to follow the next car.
View detail
There is a sense of security
Buy with Mirror exchanges to make Normal Thread Screw, OEM Product will be deflected when removed Removal of Tanax products with confidence and ◎ is also likely to rust. View detail
Cost performance is good.
It was the cheapest one I found, but there was not any problem with the installation.
There is a gap on the lower side, but even if it is too tight, it will not be possible to tighten it,
It is this.
I used Adapter for Mirror so far, but the tightening to Handlebar is sweet,
As Mirror collapsed at high speed, it was not good.
This reduced the number of parts to Handlebar by one and it became clear.
View detail