Reviews
Good work.
I attached it to kawasaki w800.
shape ? The texture is a very good product
But I thought about 10,000 yen would be a little expensive
As mentioned above, the product itself is very good, and it is possible to Cover a total of 12 to 22 with the attached UniversalAdapter etc..
I am satisfied because it is a product corresponding to the price.
View detail
Fits: MV AGUSTA BRUTALE920E, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE800, MV AGUSTA BRUTALE675, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090RR, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090R, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1090, MV AGUSTA BRUTALE1078RR, MV AGUSTA BRUTALE R989, MV AGUSTA BRUTALE 910S, MV AGUSTA BRUTALE 910R, MV AGUSTA BRUTALE 750S, MOTOGUZZI Griso, KTM 990SUPER DUKE, KTM 990 SUPERMOTO T, KTM 990 SUPERMOTO R, KTM 690ENDURO R
Processing necessary
Installed in the 2016 model ZX-6R. Machining is necessary because it can not be attached to this type. Visibility can not be expected for Mirror of this hand, but it is hard to see the idea. Because Mirror is colored by Blue, I do not feel dazzling so much. View detail
You can see the back right.
Since the Mirror comes to the outermost side of the car body, you can see the back right. The prince of the White horse never misses w
If you tightly screw Screw in every place, there will be no such thing as moving it while driving, including the Bar End Adapter.
Even in the mirror-like direction like the image, there is no problem in backward visibility, compared to normal Mirror HolderMount, and the horizontal width also scarcely expanded.
However, it can not be confirmed backward by eye movement alone, and it is necessary to move the head a little.
Also, since there is no anti-glare function, it is quite dazzling at night, but as far as I am looking at, it does not matter so much because Mirror does not enter the sight.
In addition, although some characters are written on the edge of the mirror surface, this is quite conspicuous. Because I am reversing the direction of the mirror surface, I am a little worried when I check backwards.
View detail
Bar end mirror Suitable for beginners
I feel that quality is good for price.
Because it is not compliant with vehicle inspection due to mirror area and other conditions, it is necessary to use it after being conscious.
That's because it's Small, so I like it myself...
There is little wonder and shake of the mirror surface due to vibration in the high rotation range.
Hexagonal Wrench is necessary for angle adjustment, so it will not be a bit of a fix with signal wait.
If you are not sure what to make it as a bar end mirror I think that it is easy to try in terms of price.
View detail
Best for Dress-up
Mounting as underMirror on nc 36.
Purchased for use as UnderMirror.
Quantity Ball in : Pair (for Left and Right) If you replace it, you can use it enough as UnderMirror.
Plating is also cool enough Dress-up is enough enough.
However, since Mirror itself is also small, visibility is not so good.
It was a satisfactory item even if I deducted that point.
View detail
can not see
Is it too hard to install on Separate handle?
Even if it says Single, in a voluntary SRX Tank, fixing Mirror in a position that is easy to see is a Tank and you have to set it in a difficult position to see.
I can not recommend it for Motorcycle of Separate handle because it is hard to see.
I think that it is no problem if it is a MOTARD system with a high handlebar position.
View detail
Rin Parts Rin Parts Oval Bar End Mirror
St FireSpec. I was ha ha ha ha ha! If I saw a box I could not open the box with a bad feeling to write for ZOOMER where there was no explanation anywhere, cute little Small Mirror entered.
I tried to temporarily fix it to the curved Renthal's TaperUp Handle, but there was no indication for the convenience of the hole.
I bought it as a cinnamon in the hand, but only the arm.
I think that it will be quickly replaced by a nice Combination Nifrek if even Mirror is taken off.
View detail
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpi
I love them, because not just a mirror, they fuctioning as the bar end stabilizer too, reduce the vibration on my handlebar. The mirror is looks very nice, reasonable prize but good build quality. It's fit the low handlebar on my bike, and make the cockpit looks simple without ordinary mirror. View detail
It was surprisingly unexpected.
It was a little uneasy as the price was cheap, but the structure of the goods that arrived, the structure is so firmly.
However, I felt Mirror's quality was not very good. Cut face of the edge can be seen through.
I have not used it in the long term, so I hope it will not break ...
View detail
Simple and good feeling of lowness in car height!
【What made you decide the purchase?】
It is a compact shape.
Bar end Because of the nature of the mirror, the width of the car will inevitably widen, but for this product it will be the smallest limit.
【How was it actually used?】
Although the specular surface is Small Shark, the convex mirror spec not specified in the item description Spec. Thanks to that the visibility is wide and good. Bar end mirror So, there is a benefit beyond thinking that it can indeed be installed in a good mounting position on the back of the mirror.
It is affordable product but I do not feel cheap,
It's pretty satisfying that it appears more than I had imagined the feeling of lowness in the car height with a simple look.
【Was it difficult to install? (Hard parts case)】
Throttle cone and Grip were both very simple because we were planning to install Bar End and changed to Penetrating shaped objects, but if you have not made any changes etc, please do the processing or the above mentioned corresponding to Penetrating shape Parts Change is required.
【Please tell me the point of installation and hang (in the case of Hard parts)】
To happy newbies, this is also not mentioned in the item description, but Hexagonal WrenchQuantity necessary for installation of this product : 2pc is attached.
Bar End It is a simple hang which is common in products, but at the time of inserting the installation part into the Handlebar, it has resistance to some extent and it is press-fitted and then inserted, lightly Pliersetc. Hold on (Wound, like no deformation) , It would be better to close down with the included Hexagonal Wrench.
Even if you plug in loose state you will continue to spin around Hexagonal Wrench forever.
[Is there anything I was disappointed about?]
It is not something like expectation ...
When traveling at night, than usual Mirror,
This may also be due to the low mounting position of the Bar end mirror, but the light of the following vehicle can feel dazzling.
【Hope for Manufacturer - Please let me know if you have any improvement points]
For the glare that may be caused by the low installation position of the above-mentioned Bar end mirror and the appearance improvement, the mirror surface Blue MirrorVer. I want.
Resin Parts are adopted in the mounting part, but even if it is quite tightened it tends to move due to the low resistance of the resin, so the common Material : You may choose Rubber's things.
【Have you compared items?】
Takatsu Trial mirror (Reverse attachment)
[Others]
None.
View detail
Required some slight modification to fit to 2011 pcx125. Quality was high and looks good fitted to the bike. Would recommend.
Required some slight modification to fit to 2011 pcx125. Quality was high and looks good fitted to the bike. Would recommend. View detail