Reviews
good quality
[How is it used?
Separate Handle Kit installed on XSR900 and used to fill the hole in the Jita.
Was the one you received as per Image?
Zita Mark's Resin Cap
Was the installation difficult?
Easy, just snap it in.
View detail
Note that it is not a common Bar end cap.
I bought it to fill a hole in the bar end, but I was under the impression that the actual product was smaller and exclusive.
I think there are probably many people who would do the same thing, so you should check the Size carefully before you buy.
View detail
Can be used with both Aluminum and Steel Handlebars
This bar end slider is zeta. 2007 wr250X was originally OEMSteel handlebar, now it is zetacomp bar. Now it is zetacomp bar, and it is possible to install it with either handlebar because two kinds of Adapters were attached. View detail
MOTARD, I know you're persistent about Motocross, but it's a zeta?
This time I'm going to make sure I get a good in-person picture of it installed?
In my last post, I told you how good these Items are only in writing, but a picture is worth a thousand words?
Take a look at the images, this feeling of unity with the Grip without any discomfort and the cool appearance of the Slider.
The Potential that has the concealed potentiality exudes like SNIPER of great skill. zetaBrand is great.
View detail
Same size as the Grip diameter.
I'm using it on a 2007 wr250x, MOTARD, ZETA for Motocross.
The thickness of the slider is about 3cm, so the slider does not stand out even if you wear it, and the matte black color with the Manufacturer logo stands out very well.
We like the wr250x OEM steel Handlebar, and the good thing about the Slider is that it is available in two different materials (steel handle and aluminum handlebar) to fix either steel or aluminum handlebar.:It comes with an aluminum fixture. It is not likely to come off like the other Bar Ends when it is tipped over like the Rubber Bush. (The fixing method is the same.) I was using it heavily with Motocross and HardEnduro, but it did its job well, and it didn't come off when I fell over, and the Handlebar protected the Throttle tube and Grip even when the Handlebar bent, so I was able to survive on my own. I am a great believer in the zeta Bar EndSeries. It's probably the cheapest bar end slider on the market, but the performance is unmistakable.
View detail
as expected (as opposed to expected)
Since the ZETAHandlebar was installed in MT-03, I tried to make the Bar End also ZETA I did
It's the same Manufacturer, so the fitment is perfectly fine
Other Manufacturer's Tightening Rubber Spreads Type, Not Spreads I think there is little worry about it falling out because the part is aluminum
It is so light that it is useless as a weight, so be careful Note that I don't have any problems with the MT-03, especially with the vibration of the Handlebar
View detail
Excellent loads
Nice, high quality product, installed it on Kawasaki ZRX1200DAEG, steering wheel is not original. Good hold, easy installation. Please note that the goods are plastic and they do not work as goods. I have set them as sliders sliders. Looks very beautiful. Recommend. Khoroshiy, kachestvennyy produkt, ustanovil yego na Kawasaki ZRX1200DAEG, rul 'ne original'nyy. Khoroshaya fiksatsiya, legkaya ustanovka. Proshu obratit 'vnimaniye chto gruzy plastikovyye i kak gruzy oni ne rabotayut. YA ustanovil ikh v kachestve slayderov slayderov. Vyglyadyat ochen 'krasivo. Rekomenduyu.さ ら に 表示 285/5000 A good, quality product, installed it on the Kawasaki ZRX1200DAEG, the steering wheel is not original. Good fixation, easy installation. Please note that the loads are plastic and they do not work as loads. I set them as sliders for sliders. Looks very beautiful. Recommend. translated by Google Translator View detail
Would you prefer a little longer? (^^)
I installed it together with 1 year inspection (^^)
I think it was a bit smaller than Image.
If Balance is good as long as it is long (⌒-⌒;)
However, I will do my best not to take care of me (≧ ∀ ≦)
View detail
Cap of Bar End
I installed it because I care about the hole in the Bar End. I think that it is good that Cost performance is good, and that it does not protrude.
Manufacturer of Handlebar is unknown, but it was installed normally.
There is a sense of security for those who fit a bit harder and get stuck, but they will not be able to take while running.
View detail
Not a Universal Bar End Notice
It is hard to understand because it is not specified in the item description
It is Bar end cap dedicated to Zeta Handlebar
(Replace=for Repair)
It is incompatible with a general Handlebar because its inner diameter is different
I also misunderstood the mouth I purchased
I did not think there was a difference in inner diameter so far with ZETA Handlebar and OEMHandlebar (Lol)
View detail
Even if the price was cheap and it failed, good kana was thought and it purchased, but it attached firmly. It is good kana even if had as reserves when the Handlebar end is used and use becomes impossible in an unexpected accident. oneself -- CR
Even if the price was cheap and it failed, good kana was thought and it purchased, but it attached firmly.
It is good kana even if had as reserves when the
Handlebar end is used and use becomes impossible in an unexpected accident.
oneself -- CRM -- the pure right Handle (22 or 2 mm of outsides) has been equipped satisfactorily 250 Rr.
View detail
[a Webike Monitor] -- it becomes instead of a usual Bar end -- the place which he regarded as ? and was bought -- -- I thought that it was quite small and chose a vehicle type. The Recommendation of the introduction after checking the
[a Webike Monitor] -- it becomes instead of a
usual Bar end -- the place which he regarded as ? and was bought --
-- I thought that it was quite small and chose a vehicle type.
The Recommendation of the introduction after checking the
Size well is carried out.
View detail
Since the hand guard broke, when it removed, since the handle and the hole of the clip were conspicuous, it closed with this cap. Now, a possibility that rain and an insect might go into the inside of a handle disappeared.
Since the hand guard broke, when it removed, since the handle and the hole of the clip were conspicuous, it closed with this cap.
Now, a possibility that rain and an insect might go into the inside of a handle disappeared.
View detail