Reviews
Installed on Z900RS
I had the internal Heavy weight, so I bought this one in Champagne gold for the purpose of changing the color of the Bar End. The texture is very good and it is just beautiful. I wish it were a little cheaper, but I am satisfied with it. With this size Heavy weight installed, I hardly feel any vibration on the Handlebar. View detail
POSH Faith Ultra Heavy Bar End Outer
SRX has a longer Bar End as Standard Equipment, but it is already discontinued.
While products of similar length are hard to find, this one is just right, although it is one size too large.
View detail
For a change of pace around Handlebar!
There is no doubt about the quality of the product!
This time, we wanted to tighten up the Handlebar area with black, so we used matte black.
This is a Cover Only replacement.
View detail
Satisfied with the quick response.
Since the lever was replaced with a Speedra gold one, the bar end was Champagne gold, so we asked for a Speedra bar end in the same color. The cover that arrived at the store was not the one that was returned. The cover I received was eligible for return, so I inquired about it, and they quickly responded by replacing the original within a week, View detail
Easy dress-up
The quality is good, not cheap, and the installation is so easy that you don't even have to think about it. I use Levers OEM Black, but I like it on my GSX1300R HAYABUSA Separate handle, because it stands out. View detail
Purchased for dress-up.
I usually wear Champagne gold, but I bought Matte Black because I want to change it depending on my mood.
Good texture.
View detail
POSH Faith Posh Face Repair and Option Parts
Honda vehicles cannot be fitted with the Bar End of your choice without this half-moon Spacer.
If the product is sold by Hondafor Vehicle from the beginning, a half-moon Spacer is included, but if the product you prefer is not a Hondafor Vehicle, this is a necessary component.
View detail
New ModelGSX1300R HAYABUSA
Inner and always Quantity:This is a slightly expensive purchase as the product is a Set. The texture and surface treatment are as good as expected. View detail
Installed on an external Separate handle
[How is it used?
Installed on NINJA2 Helmet 50RR.
It is used for touring and mountain passes.
It has been in use for about six years.
After replacing the Penske Separate handle, I was concerned about vibration, so I introduced the Penske Separate handle.
Replacement from DAYTONA heavy weight bar end.
Was the one you received as per Image?
Just like the image. I felt that it was heavy and would eliminate vibration.
Was the installation difficult?
It's not a difficult job since it's just a matter of inserting it into the Handlebar, but since the connection was quite loose, I wrapped some Vinyl Tape around it to make the connection a little tighter and inserted it.
I used ZETA's Bar End, but the mounting bolt was not long enough, so I had to use Plus head pot screw. (Stainless Steel) It was installed using
How was your experience with it?
It stopped the vibration well, so I was satisfied with the Large variation.
Rather than using the heavy weight bar end to stop the vibration, I used this product to stop the vibration. I felt that this product stopped the vibration better than the Heavy weight bar end.
Recommendations for single-cylinder and two-cylinder motorcycles that are concerned about Handlebar vibration.
We recommend that you take measures to prevent vibration, because if your hands become numb, you will not be able to ride safely.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
A place where the intuition is a little loose.
[ITEMS TO BUY TOGETHER
Bar end plug
Longer Bolt
View detail
Great fit and cheap repair option
I had my OEM bar end weights that I wanted to use on my new handle bar setup but they had no mounting rubbers. I needed a way to get these fitted and the cheapest and most effective way was to use these solid bar end rubbers from Posh. They a quality product and a cheap repair option, also have turned out to be a great fit on my new 7/8 handle bars. Webike has many repair options listed on their site, you just need to search the motorcycle parts drop down menu and browse all the sub categories to see all that is available. View detail
Exchange with the thing damaged by the fall etc. etc.
This is for Replacement when you sadly (mysteriously) let it fall over.
Of course, you can change the color according to your mood.
The reason why I chose POSH is because the anodized finish does not fade easily.
The image shows an item that has been used for one year, but has not faded at all.
POSH is excellent.
The video will be attached to the appropriate one.
View detail
restoration of standing moss
Thank God only Gawata was out. (Polish)
You can change the color according to your mood.
View detail
Measures against fine vibration in single-cylinder engines
What made you decide to buy?
The vibration of the single cylinder engine also affects the Handlebar. In addition, when waiting at a traffic light, if the front brake is not applied, the Mirror "Wobbly wobbly. I think that's how much the vibration of the Engine affects the Handlebar. That's how much the vibration of the Engine is affecting the Handlebar. I bought this to reduce the vibration.
How was your experience with it?
Before installation, when waiting at a traffic light, if the front brake is not applied, the Mirror "Wobbly wobbly. I think that the symptoms that I was experiencing are now less severe than before I had it installed.
PartsThe feeling after installation will change depending on the individual difference of the vehicle and the feeling of the user, so please use it as a reference.
[Hope to Manufacturer
The thing is that there were only settings for M8 and M5.
What is the point or hang of the installation?
This time, I bought one for M5Nut because I changed to Bar end mirror.
When I installed the one for M5Nut to the Bar end mirror, ・・・・Bar end mirror was Bolt of M6, and it was my regretful lack of confirmation. (Reflection) If this is not done, the Heavy weightNut which I purchased cannot be used. So I checked if I could change the bolt of Bar end mirror to M5, but I couldn't find M5 bolt length to fit Bar end mirror. I was about to give up on the heavy weight nut installation, when I suddenly thought that it would be possible to install the M6 Tap. I was able to install the heavy weight Nut M6 Spec. on the Bar end mirror.
View detail
Bar End for Repair
I bought this product because I changed my Handlebar. I was using another company's product, for OEM HandlebarBar End, but I could not install it as it was, so I bought this product and succeeded in installing it.
It is a special product and the fit feeling is good. It does not wobble.
View detail
A feeling that the hand reaches the itchy place
I bought it because I felt that the width of the off-road bar of Akosat wearing the old XT 250 that I owned was narrower now.
I made a mistake last time, I bought a 14 mm inside diameter, bite Washer etc and installed it with a spurious but since I felt delicately loose feeling, I purchased it again.
Since the vehicle is docked in, it is not installed yet, but it should fit well.
Even with a slight extension, Handling improves greatly, so if you have questions about the compatibility of Handlebar with your physique or vehicle, it may become a clue to your solution.
View detail
I was able to experience the effect as soon as I started running
? 【What made you decide the purchase?】 It is a trouble that the hand hurts from the vibration of the Handlebar, it has been variously colored and heavy, so I chose the product now that it seems to be effective.
? 【How was it actually used?】 I was able to experience it as soon as I started running. However, not all vibrations that matter are not lost. I was glad that I bought it because I was pretty curbed down considerably.
? 【Was it difficult to install? (Hard parts case)】 It's too easy. Just exchange for Bar End's Nut.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 The Axel side cautiously positioned so that the return of the Accelerator grip will not get worse.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?] I was concerned that the contact surface of Heavy weightNut was narrower than the Flange nut at Bar End and wore it across Washer.
? [Request to Manufacturer - Please let me know if there are any improvement points】 As above, it is better if Washer comes with it.
? 【Have you compared items?】 Other company's products such as Heavy Weight Bar End.
? [Others] Any
View detail
You can also imechen with Cover Only!
Two years passed after I purchased it with Weight and Set, I bought it because I faded fairly badly. Color is the same color, but unlike other products it is easy for Wallet to exchange Cover Only. I want you to have it for a long time. View detail
Suguremono which can be exchanged cheaply at Repair Parts
Wound enters the Bar End with standing gowns As Repair Parts, it is saved with a substitute that can be exchanged cheaply (??????)
This time it is purchase as Stock, so please do not use it (Lol)
View detail
By standing - - -
Bar End was scraped off by standing and replaced.. It is saved because only Outer can be exchanged. The color of Champagne gold is also good, I am satisfied. View detail
I like it.
Bandit 1250F Bar End was replaced and installed. Because it is Heavy weight, it is heavy and it is heavy in OEM 1. Is it about 5 times higher?. Medium speed range (50~60K) Although I had a slight numbness feeling for a long time running, I completely eliminated it and I did a good shopping because I did not get numb at all even at high speed. Just a van's Bar End is somewhat special
Length was not enough in the attached Cap screw, I ordered from Bolt shop. Length is the total length (Including Head) so
130 mm, thickness is M 6, 30 mm from threaded tip
I used it. It is a standard that can not be purchased at Home center.
View detail