Reviews
Handlebar End
There are some individual differences.
Because of its Weight compared to OEM
There is a reduction in hand numbness from Handlebar vibration.
Since the car body is Lime green
Green Light's Bar End looks great.
It also increases motivation to run.
View detail
Installed on Z900RS
I had the internal Heavy weight, so I bought this one in Champagne gold for the purpose of changing the color of the Bar End. The texture is very good and it is just beautiful. I wish it were a little cheaper, but I am satisfied with it. With this size Heavy weight installed, I hardly feel any vibration on the Handlebar. View detail
POSH Faith Ultra Heavy Bar End Outer
SRX has a longer Bar End as Standard Equipment, but it is already discontinued.
While products of similar length are hard to find, this one is just right, although it is one size too large.
View detail
For a change of pace around Handlebar!
There is no doubt about the quality of the product!
This time, we wanted to tighten up the Handlebar area with black, so we used matte black.
This is a Cover Only replacement.
View detail
Off-road motorcycleHandlebar replacement
I purchased this for an off-road motorcycle and hand guard fixation. The quality is fine and it does its job well. View detail
Fits: YAMAHA NIKEN, YAMAHA NIKEN GT, YAMAHA MT-07, YAMAHA MT-07 ABS, YAMAHA MT-07 ABS, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR700, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XJR1300, YAMAHA MT-10
It was also applicable to MT-10
It worked for MT-10.
The black Anodized Finishing makes the gaps less noticeable even if they are visible.
View detail
It's not visible, but I'm satisfied.
It is a part that cannot be seen once installed, but I am very satisfied with the universal performance of the product. View detail
Satisfied with the quick response.
Since the lever was replaced with a Speedra gold one, the bar end was Champagne gold, so we asked for a Speedra bar end in the same color. The cover that arrived at the store was not the one that was returned. The cover I received was eligible for return, so I inquired about it, and they quickly responded by replacing the original within a week, View detail
Fits: YAMAHA T-MAX 500, YAMAHA T-MAX 500, YAMAHA T-MAX 500, YAMAHA T-MAX 530, YAMAHA T-MAX 530, YAMAHA T-MAX 530, YAMAHA T-MAX 530 IRON MAX, YAMAHA T-MAX 530 DX, YAMAHA T-MAX 530 SX, YAMAHA T-MAX 530 SX SPORT EDITION
GoodJob on the highway driving!
Used when driving on highways, it is comfortable to drive at a constant speed without tiring the right hand. However, the price is a little expensive. View detail
Easy dress-up
The quality is good, not cheap, and the installation is so easy that you don't even have to think about it. I use Levers OEM Black, but I like it on my GSX1300R HAYABUSA Separate handle, because it stands out. View detail
Purchased for dress-up.
I usually wear Champagne gold, but I bought Matte Black because I want to change it depending on my mood.
Good texture.
View detail
POSH Faith Posh Face Repair and Option Parts
Honda vehicles cannot be fitted with the Bar End of your choice without this half-moon Spacer.
If the product is sold by Hondafor Vehicle from the beginning, a half-moon Spacer is included, but if the product you prefer is not a Hondafor Vehicle, this is a necessary component.
View detail
New ModelGSX1300R HAYABUSA
Inner and always Quantity:This is a slightly expensive purchase as the product is a Set. The texture and surface treatment are as good as expected. View detail
good quality
[How is it used?
Separate Handle Kit installed on XSR900 and used to fill the hole in the Jita.
Was the one you received as per Image?
Zita Mark's Resin Cap
Was the installation difficult?
Easy, just snap it in.
View detail
Installed on an external Separate handle
[How is it used?
Installed on NINJA2 Helmet 50RR.
It is used for touring and mountain passes.
It has been in use for about six years.
After replacing the Penske Separate handle, I was concerned about vibration, so I introduced the Penske Separate handle.
Replacement from DAYTONA heavy weight bar end.
Was the one you received as per Image?
Just like the image. I felt that it was heavy and would eliminate vibration.
Was the installation difficult?
It's not a difficult job since it's just a matter of inserting it into the Handlebar, but since the connection was quite loose, I wrapped some Vinyl Tape around it to make the connection a little tighter and inserted it.
I used ZETA's Bar End, but the mounting bolt was not long enough, so I had to use Plus head pot screw. (Stainless Steel) It was installed using
How was your experience with it?
It stopped the vibration well, so I was satisfied with the Large variation.
Rather than using the heavy weight bar end to stop the vibration, I used this product to stop the vibration. I felt that this product stopped the vibration better than the Heavy weight bar end.
Recommendations for single-cylinder and two-cylinder motorcycles that are concerned about Handlebar vibration.
We recommend that you take measures to prevent vibration, because if your hands become numb, you will not be able to ride safely.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
A place where the intuition is a little loose.
[ITEMS TO BUY TOGETHER
Bar end plug
Longer Bolt
View detail
สินค้าตรงตามภาพตัวอย่าง เนื้อยางคุณภาพดี ลองซื้อมาคู่แรกเพื่อทดลองใช้ ใช้งานดีมากๆ ใช้งานกันไปยาวๆ เลย View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Effective
It is a vibration control product that is installed in an almost invisible part. I am using Heavy Weight Bar End and Aluminum Handlebar. Do you think it'll work? But I tried to incorporate it.
Honestly… it works! The vibration that was coming out of the Handlebar has been controlled.
The price is relatively cheap, so it's easy to try.
However, as the vibration of the Grip seems to have been suppressed, the vibration of the Lever has started to bother me (laughs).
View detail
Great fit and cheap repair option
I had my OEM bar end weights that I wanted to use on my new handle bar setup but they had no mounting rubbers. I needed a way to get these fitted and the cheapest and most effective way was to use these solid bar end rubbers from Posh. They a quality product and a cheap repair option, also have turned out to be a great fit on my new 7/8 handle bars. Webike has many repair options listed on their site, you just need to search the motorcycle parts drop down menu and browse all the sub categories to see all that is available. View detail
Exchange with the thing damaged by the fall etc. etc.
This is for Replacement when you sadly (mysteriously) let it fall over.
Of course, you can change the color according to your mood.
The reason why I chose POSH is because the anodized finish does not fade easily.
The image shows an item that has been used for one year, but has not faded at all.
POSH is excellent.
The video will be attached to the appropriate one.
View detail
restoration of standing moss
Thank God only Gawata was out. (Polish)
You can change the color according to your mood.
View detail