Reviews
Repair item Screw replacement
No problems with the quality and feel of the product, as it is a Repair product Screw.
I appreciate the fact that there is a repaired product, but it would be nice to be able to buy from 1 pc since I don't use it that much.
View detail
Required to fix the Bar End of a Steel handle with a Large inner diameter.
[How is it used?
When we tried to attach ZETA's PROArmor Handguard Bend to KLX230R's STD Handlebar, the Bar End Adapter that comes with the PROArmor Handguard Bend was designed for use with the Smallest aluminum Handlebar. Therefore, it could not be fixed to the bar end of a steel handle with a large inner diameter (NORMAL). Therefore, we purchased the PROArmor Handguard Bend Bar End Adapter for the purpose of making it compatible with a large inner diameter.
Was the one you received as per Image?
Yes.
Was the installation difficult?
It took some force to put it on the Bar End Adapter for PROArmor Handguard.
How was your experience with it?
It matched the KLX230R's steel handle inner diameter and was secured perfectly.
[Was there anything that disappointed you?
Nothing in particular, but it would be better if the outer circumference had a non-slip finish.
[With or without Instruction Manual
No Instruction Manual is available
[Notes]
Since there is no non-slip surface on the outer circumference, it may be easy to rotate when falling down unless used with SIDE/FrontHand Guard Mount.
Opinions and requests to Manufacturer
Also develop products with non-slip finish on the outer circumference.
View detail
Makeover
I bought the Titanium color last time, but it did not match the color of the car body.
The design has been changed to Type 2.
It is available in a total of 18 colors, so it will be easy to match the color of your car.
You might want to check the actual color in person. I bought mine without looking...
Price varies depending on color.
My Black chrome has a list price of 4,400 yen. (tax included) It was
It is said to be Aluminum Cut-out.
This product is designed to meet the needs of customers who want to change the color of the products that have been damaged by standing dust, etc.
View detail
Note that it is not a common Bar end cap.
I bought it to fill a hole in the bar end, but I was under the impression that the actual product was smaller and exclusive.
I think there are probably many people who would do the same thing, so you should check the Size carefully before you buy.
View detail
Periodic tightening!
The slight vibration while driving has been significantly reduced. There are no difficult points to install, and anyone can do it.
As stated in the instruction manual, it needs to be retightened periodically. In the past, I had a large noise while driving, and when I checked it out, I found that the handlebar was vibrating and making a noise due to the looseness of this product. Tightening this product fixed the problem, so it is recommended to tighten it regularly.
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Worth a try.
I put it on my Initial ModelS1000RR.
Very easy to install
I heard that the direction of the groove is Bar End side.
The effect is that the vibration does not disappear, but it becomes Mild.
When combined with the heavy weight Bar End, the vibration in the rpm range used for touring is almost unnoticeable.
View detail
It's a consumable part, so it's better to have a spare.
I bought this as Repair Parts because my Ultra heavy bar end Sleeve was cracked and deformed.
The width of the car is not quite enough, so I have to move the Bar End to widen it, but every time I tighten it again, it gets deformed. Originally, once it is installed, it is not likely to be removed, but I guess it is rare when the car is inspected.
Product Evaluation
This product is a thin synthetic rubber tube, which is used as a friction material between the aluminum sleeve and the pipe handle.
Due to the nature of the rubber, if you tighten it, it will crush and stretch, making it sticky.
The outer diameter of the Strap bar is very close to the inner diameter of the Handlebar, so if it is stretched, it will not fit in the Pipe handle and cannot be assembled.
I take it off and put it back on, so I stop tightening the bolt when it stops working because I don't want it to get crushed, but even so, it will last 3-4 times.
Installation
When you buy this is when the one you were using is ruined, so it is quite deformed, but when you disassemble it, it is better to buy it in advance on the premise of basic replacement.
The first one is not crushed, so if you don't hook it, you will be able to put it in Smooth.
If you have difficulty, you can apply a volatile cleaning solution (Parts cleaner), etc. to make it easier to slide in.
Never put oil on it, it is a friction material and it will slip and not stop and the Bar End itself will fall out (I did that once).
View detail
I like that it's out as Repair Parts.
The width of the car is not quite enough, so I have to move the Bar End to widen it, but every time I tighten it again, it gets deformed. Originally, once it is installed, it is not likely to be removed, but I guess it is rare when the car is inspected.
This time it was cracked and broken, so I replaced it to bring it back after the inspection.
It is a good product that can be repaired because Repair Parts is out as Lineup.
In addition, I can use it for a long time because it is not discontinued though a lot of years have passed since it was put on the market.
I was worried that I should replace the Heavy weight bar end because the similar product of Heavy weight bar end is out from DAYTONA, but I decided not to replace this Repair Parts because the price setting is cheap.
Product Evaluation
It's a pity that this product is made of aluminum and is easily deformed due to its thin thickness, but it seems to be an unavoidable design in order to follow the surface in the Handlebar.
About installation
When you buy this, it's when the one you were using is ruined, so it's quite deformed and you'll probably struggle to remove it.
If you can loosen the bolt somehow, you can bend the aluminum sleeve inside with pliers and release the bolt.
After that, it becomes possible to restore and assemble it by replacing it.
Forced bending is likely to break, so it is better to do it with attention little by little.
View detail
Easy exchange
The paint on the original Outer Cover is peeling off.
Bought the Outer only because it looked so pathetic.
Because you can purchase a Single Item of each color Cover, you can change your preference and
Can be purchased depending on the situation, such as damage caused by a fall.
Parts are also available from Outer Cover to Bolt and Inner.
It's great to be able to exchange without having to buy everything from scratch, so you don't have to waste more stuff.
I don't remember doing anything to damage the paint at all, like falling over.
I'm not happy with the fact that the paint came off so easily, but it was easy to deal with.
This is good if you want to continue using Bar End.
View detail
Easy installation on Bar End equipped vehicles
I installed it on my CB223S with modified Handlebar.
The OEMHandlebar has a weight built into the end of the Handlebar.
After changing to Other Brand Product's Aluminum Handlebar, the vibration became worse.
Decided to install.
I installed it in conjunction with the Handlebar Brace.
The difference between before and after use is that the experience is a little better?
It was a degree, but the image of VideoCamera fixed to Handlebar was
It's suddenly much easier to see (not perfect), so the effect is definitely
I think there is.
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Surely the vibration is gone …?
Because of the Bar End made by Rye TEC, the dimensions do not fit.
Since there was no way to do so, we produced the color with Aluminum and installed Black Anodized Aluminum.
The feeling of using it is definitely no longer vibrating …?
( ?◊? ) ? I'm like, "W
It's not so much that it's gone, it's more like the resonant point of the Gapta.
Well, the vibration was definitely reduced at the RPMs we normally use.
View detail
Used in combination with Bar End
important item
[Was there anything that disappointed you? No
Do you have any wishes or improvements you would like to make for the Manufacturer? I'd like to get a product of the same size with a little more weight, or one with a middle joint that can be changed in length and weight.
[Do you have any products to compare it to? No
Frequently Asked Items
What made you decide to buy? price
How was your experience with it? Satisfied
Was the installation difficult? No
[Was the Instruction Manual easy to understand? Yes
View detail
as expected (as opposed to expected)
Since the ZETAHandlebar was installed in MT-03, I tried to make the Bar End also ZETA I did
It's the same Manufacturer, so the fitment is perfectly fine
Other Manufacturer's Tightening Rubber Spreads Type, Not Spreads I think there is little worry about it falling out because the part is aluminum
It is so light that it is useless as a weight, so be careful Note that I don't have any problems with the MT-03, especially with the vibration of the Handlebar
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT /5, BMW R12 nineT, BMW R12
It looks better, but it is somewhat unwieldy
Do you want ThrottleControl 's function for long hours of highway driving etc?
The so-called Plastic's Throttle assist is cheesy, and there is a feeling of disturbance even if it says anything.
Every time I detach it, I hear the scratches on the Grip, and there are opinions that I can turn it against the other, but it is still an obstacle.
For this product, you will get a satisfying feeling of Large in terms of high quality, appearance and texture.
However, because it was installed in 2018 MODEL, the gap with the ThrottleGrip end got about 5 mm free.
Also, since horizontally opposed two-cylinder Engine uses AxelOff and considerable engine braking will benefit, ingenuity is necessary for locking and releasing. I think that Multi-engine is quite handy.
View detail
Fits: BMW R1200RT, BMW K1200GT, BMW G310R, BMW K1300GT, BMW G310GS
Difference between existence and nothing
When it comes to high-speed long distance, I want to release Right hands even if it's a bit better. That is possible. By turning the Blue part to Right, we push the Grip in the axial direction and stop it. In fact, you can turn with the Small finger so that the Right hand is shifted and sent, or you can turn it with the Left hand with Right one hand driving condition. You can cancel Cancellation as is or return to Left with the fingertip of Right hand. View detail
The function is satisfactory, but the shape is another one.
? 【What made you decide the purchase?】
Unparalleled Large Kimono - It is weight, because if you thought that this would considerably reduce the vibration.
? 【How was it actually used?】
Almost nothing about fine vibrations.
When Clutch lever is set to Other Company Product,
Depending on the shape of Lever it may interfere with this product.
? 【Was it difficult to install? (Hard parts case)】
Because of the Screw formula unique to the Honda car, the Outer circled and it was difficult to tighten.
Curing the Outer part and securing it with Pliers etc. makes it easier to tighten.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I think that you should use Screw lock to prevent falling off.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 N / A
? [Is there anything I was disappointed about?]
We have exchanged Clutch lever with Other Company Product,
When grasping Lever, it interferes with the Bar End, and the painting of the Bar End is rapidly peeling off.
I wish I had had a different shape a bit more.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I think that there are parts that can not be helped in order to bring weight
Considering the interference to Lever, I think that it is better to consider the shape a bit more.
? 【Have you compared items?】
Compared with other companies' products, others are light weight,
Small vibration was transmitted to the palm considerably.
Considering the burden, I think that this product is still good.
? [Others]
Small It is very Unique that you can exchange only the Outer part even if it gets scratched etc.
I think it's a good point.
I think that it is also good in terms of being able to easily change colors.
As expected, the Gold amount over 10,000 yen in Bar End seems to require a bit of courage.
View detail
POSHPosh Ultra Heavy Bar End Outer
This time, I got standing moss and replaced the Handlebar End as it got hurt. Body and Cover can be separated and scratched or changed for Motorcycle and Cover can be exchanged and color can be changed so it is excellent for Cost pearformance. View detail
Cap of Bar End
I installed it because I care about the hole in the Bar End. I think that it is good that Cost performance is good, and that it does not protrude.
Manufacturer of Handlebar is unknown, but it was installed normally.
There is a sense of security for those who fit a bit harder and get stuck, but they will not be able to take while running.
View detail
Even if you hurt you can exchange only Outer.
【What made you decide the purchase?】
Because Inner and Outer are separate,
In the unlikely event that only Outer can be exchanged
It can be done cheaply in terms of cost.
Because there are plenty of colors, those who can afford can also change according to their mood.
【How was it actually used?】
Large It stands out considerably..
Wow that's cool.
【Was it difficult to install? (Hard parts case)】
Hexagonal Wrench 1 pc makes it easy to replace.
【Please tell me the point of installation and hang (in the case of Hard parts)】
There is none.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
There is none.
【Have you compared items?】
There is none.
View detail
Even if the price was cheap and it failed, good kana was thought and it purchased, but it attached firmly. It is good kana even if had as reserves when the Handlebar end is used and use becomes impossible in an unexpected accident. oneself -- CR
Even if the price was cheap and it failed, good kana was thought and it purchased, but it attached firmly.
It is good kana even if had as reserves when the
Handlebar end is used and use becomes impossible in an unexpected accident.
oneself -- CRM -- the pure right Handle (22 or 2 mm of outsides) has been equipped satisfactorily 250 Rr.
View detail