Reviews
![[Bar End Repair Parts] Stop Rubber](https://global.webike-cdn.net/photo/impression/88/886c5f84c295d9715cdd709ea00e69d7L.jpg)
Now that nothing has changed, it will vibrate out again
Do you have any wishes or improvements you would like to make for the Manufacturer?
I'd like them to have more frictional power
[Do you have any products to compare it to?
No replacements available for repair parts
What made you decide to buy?
I came to discover through the improved search function of the webi that it is out as Repair Parts Hooray for Ubi!
How was your experience with it?
That won't change
It is not possible to tighten the Bolt because the Bolt and the Parts of Gold in the Bolt are dancing together The vibrations will be released without any friction from
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
Titanium Damping Parts
I didn't know that Titanium had damping capabilities to reduce vibration
I didn't know that until recently (Polish)
I have several AELLA Parts on, so I'm not particularly suspicious of them
I didn't feel much of a reduction in vibration when I drove around the neighborhood, but fatigue over long distances I'm hoping for some relief
View detail
Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus
To be honest, I thought it raised eyebrows …
It was mentioned that you can reduce unpleasant vibrations simply by inserting it into the Handlebar End I only saw pictures of the Separate handle installation, so it works with the Bar handle as well I installed it to see if there was a difference between the two, but the vibration seems to have disappeared strangely
I haven't changed anything else around the Handlebar except for this part, so if there is a change, it's for sure I feel that this is the effect of Parts:Titanium products have expensive images, but I think they are reasonably priced and are a good product I can recommend it
View detail
It's normal
Personally, I don't like the plain old Bar End, so I used KIJIMA's But because I wanted to make the end shorter in combination with Grip, I installed it If old-fashioned Racer is preferred, it is Recommendation However, whether it is expensive View detail
as expected (as opposed to expected)
Since the ZETAHandlebar was installed in MT-03, I tried to make the Bar End also ZETA I did
It's the same Manufacturer, so the fitment is perfectly fine
Other Manufacturer's Tightening Rubber Spreads Type, Not Spreads I think there is little worry about it falling out because the part is aluminum
It is so light that it is useless as a weight, so be careful Note that I don't have any problems with the MT-03, especially with the vibration of the Handlebar
View detail
Excellent loads
Nice, high quality product, installed it on Kawasaki ZRX1200DAEG, steering wheel is not original. Good hold, easy installation. Please note that the goods are plastic and they do not work as goods. I have set them as sliders sliders. Looks very beautiful. Recommend. Khoroshiy, kachestvennyy produkt, ustanovil yego na Kawasaki ZRX1200DAEG, rul 'ne original'nyy. Khoroshaya fiksatsiya, legkaya ustanovka. Proshu obratit 'vnimaniye chto gruzy plastikovyye i kak gruzy oni ne rabotayut. YA ustanovil ikh v kachestve slayderov slayderov. Vyglyadyat ochen 'krasivo. Rekomenduyu.さ ら に 表示 285/5000 A good, quality product, installed it on the Kawasaki ZRX1200DAEG, the steering wheel is not original. Good fixation, easy installation. Please note that the loads are plastic and they do not work as loads. I set them as sliders for sliders. Looks very beautiful. Recommend. translated by Google Translator View detail
Would you prefer a little longer? (^^)
I installed it together with 1 year inspection (^^)
I think it was a bit smaller than Image.
If Balance is good as long as it is long (⌒-⌒;)
However, I will do my best not to take care of me (≧ ∀ ≦)
View detail
Fits: BMW RnineT, BMW RnineT, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT Urban G/S, BMW RnineT /5, BMW R12 nineT, BMW R12
It looks better, but it is somewhat unwieldy
Do you want ThrottleControl 's function for long hours of highway driving etc?
The so-called Plastic's Throttle assist is cheesy, and there is a feeling of disturbance even if it says anything.
Every time I detach it, I hear the scratches on the Grip, and there are opinions that I can turn it against the other, but it is still an obstacle.
For this product, you will get a satisfying feeling of Large in terms of high quality, appearance and texture.
However, because it was installed in 2018 MODEL, the gap with the ThrottleGrip end got about 5 mm free.
Also, since horizontally opposed two-cylinder Engine uses AxelOff and considerable engine braking will benefit, ingenuity is necessary for locking and releasing. I think that Multi-engine is quite handy.
View detail
Cospa best
It is the best item of COSPA. However, since installation Nut is a standard product, there is concern about loosening, so we changed Nut to SelfLock type and installed it. On the Axel side, Washer has also changed to one with Small diameter because it is easy to hinder opening and closing. View detail
![[Bar End Repair Parts] Solid Bar End Rubber](https://img.webike-cdn.net/catalogue/images/22383/031177-72_01_TS.jpg)
A feeling that the hand reaches the itchy place
I bought it because I felt that the width of the off-road bar of Akosat wearing the old XT 250 that I owned was narrower now.
I made a mistake last time, I bought a 14 mm inside diameter, bite Washer etc and installed it with a spurious but since I felt delicately loose feeling, I purchased it again.
Since the vehicle is docked in, it is not installed yet, but it should fit well.
Even with a slight extension, Handling improves greatly, so if you have questions about the compatibility of Handlebar with your physique or vehicle, it may become a clue to your solution.
View detail
I was able to experience the effect as soon as I started running
? 【What made you decide the purchase?】 It is a trouble that the hand hurts from the vibration of the Handlebar, it has been variously colored and heavy, so I chose the product now that it seems to be effective.
? 【How was it actually used?】 I was able to experience it as soon as I started running. However, not all vibrations that matter are not lost. I was glad that I bought it because I was pretty curbed down considerably.
? 【Was it difficult to install? (Hard parts case)】 It's too easy. Just exchange for Bar End's Nut.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】 The Axel side cautiously positioned so that the return of the Accelerator grip will not get worse.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
? [Is there anything I was disappointed about?] I was concerned that the contact surface of Heavy weightNut was narrower than the Flange nut at Bar End and wore it across Washer.
? [Request to Manufacturer - Please let me know if there are any improvement points】 As above, it is better if Washer comes with it.
? 【Have you compared items?】 Other company's products such as Heavy Weight Bar End.
? [Others] Any
View detail
Fits: BMW R1200RT, BMW K1200GT, BMW G310R, BMW K1300GT, BMW G310GS
Difference between existence and nothing
When it comes to high-speed long distance, I want to release Right hands even if it's a bit better. That is possible. By turning the Blue part to Right, we push the Grip in the axial direction and stop it. In fact, you can turn with the Small finger so that the Right hand is shifted and sent, or you can turn it with the Left hand with Right one hand driving condition. You can cancel Cancellation as is or return to Left with the fingertip of Right hand. View detail
You can also imechen with Cover Only!
Two years passed after I purchased it with Weight and Set, I bought it because I faded fairly badly. Color is the same color, but unlike other products it is easy for Wallet to exchange Cover Only. I want you to have it for a long time. View detail
Suguremono which can be exchanged cheaply at Repair Parts
Wound enters the Bar End with standing gowns As Repair Parts, it is saved with a substitute that can be exchanged cheaply (??????)
This time it is purchase as Stock, so please do not use it (Lol)
View detail
The function is satisfactory, but the shape is another one.
? 【What made you decide the purchase?】
Unparalleled Large Kimono - It is weight, because if you thought that this would considerably reduce the vibration.
? 【How was it actually used?】
Almost nothing about fine vibrations.
When Clutch lever is set to Other Company Product,
Depending on the shape of Lever it may interfere with this product.
? 【Was it difficult to install? (Hard parts case)】
Because of the Screw formula unique to the Honda car, the Outer circled and it was difficult to tighten.
Curing the Outer part and securing it with Pliers etc. makes it easier to tighten.
? 【Please tell me the point of installation and hang (in the case of Hard parts)】
I think that you should use Screw lock to prevent falling off.
? Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 N / A
? [Is there anything I was disappointed about?]
We have exchanged Clutch lever with Other Company Product,
When grasping Lever, it interferes with the Bar End, and the painting of the Bar End is rapidly peeling off.
I wish I had had a different shape a bit more.
? [Request to Manufacturer - Please let me know if you have any improvement points]
I think that there are parts that can not be helped in order to bring weight
Considering the interference to Lever, I think that it is better to consider the shape a bit more.
? 【Have you compared items?】
Compared with other companies' products, others are light weight,
Small vibration was transmitted to the palm considerably.
Considering the burden, I think that this product is still good.
? [Others]
Small It is very Unique that you can exchange only the Outer part even if it gets scratched etc.
I think it's a good point.
I think that it is also good in terms of being able to easily change colors.
As expected, the Gold amount over 10,000 yen in Bar End seems to require a bit of courage.
View detail
Excellent Cost performance
It was not possible to purchase because the inside diameter of Handlebar made in China is different.
But it was a thing that I liked
I tried hard by processing Rubber but it was impossible.
I got angry so I could force it in with Hammer and fit it snugly.
Conclusion, it is useless for Chinese Handlebar.
Chinese handlebar is useless.
Handlebar is useless.
View detail
By standing - - -
Bar End was scraped off by standing and replaced.. It is saved because only Outer can be exchanged. The color of Champagne gold is also good, I am satisfied. View detail
POSHPosh Ultra Heavy Bar End Outer
This time, I got standing moss and replaced the Handlebar End as it got hurt. Body and Cover can be separated and scratched or changed for Motorcycle and Cover can be exchanged and color can be changed so it is excellent for Cost pearformance. View detail
I like it.
Bandit 1250F Bar End was replaced and installed. Because it is Heavy weight, it is heavy and it is heavy in OEM 1. Is it about 5 times higher?. Medium speed range (50~60K) Although I had a slight numbness feeling for a long time running, I completely eliminated it and I did a good shopping because I did not get numb at all even at high speed. Just a van's Bar End is somewhat special
Length was not enough in the attached Cap screw, I ordered from Bolt shop. Length is the total length (Including Head) so
130 mm, thickness is M 6, 30 mm from threaded tip
I used it. It is a standard that can not be purchased at Home center.
View detail
It is nice to sell only Cover
I was worried that the Wound was attached with standing, so I purchased it according to Sale.
The color was slightly different, but I decided not to mind because it is many times better than the one with Wound.
As Cover only sells it, so this time "Standing care" Ya "Imechen" I want to do something when I want to exchange without waste.
View detail