• Home
  • Product reviews
  • Search reviews
  • Motorcycle Parts
  • Handles & Control Parts
  • Other Bar End Options / Repair Parts
steps-review.png
Filter
icon-webike.png
Write a review and get Webike Points!

Reviews
SnailProject Other Bar End Options / Repair Parts Clear all
Ultra Heavy Bar End Outer Type 2 For M8
POSH
Ultra Heavy Bar End Outer Type 2 For M8
Japanese Webike user
jp
4/5

Makeover

I bought the Titanium color last time, but it did not match the color of the car body.
The design has been changed to Type 2.
It is available in a total of 18 colors, so it will be easy to match the color of your car.
You might want to check the actual color in person. I bought mine without looking...
Price varies depending on color.
My Black chrome has a list price of 4,400 yen. (tax included) It was
It is said to be Aluminum Cut-out.
This product is designed to meet the needs of customers who want to change the color of the products that have been damaged by standing dust, etc. View detail

Plastic Bar End Cap
ZETA
Plastic Bar End Cap

Fits: Others

Japanese Webike user
jp
4/5

Note that it is not a common Bar end cap.

I bought it to fill a hole in the bar end, but I was under the impression that the actual product was smaller and exclusive.
I think there are probably many people who would do the same thing, so you should check the Size carefully before you buy. View detail

Heavy Weight Nut
POSH
Heavy Weight Nut

Fits: Others

Japanese Webike user
jp
5/5

Installed on an external Separate handle

[How is it used?
Installed on NINJA2 Helmet 50RR.
It is used for touring and mountain passes.
It has been in use for about six years.
After replacing the Penske Separate handle, I was concerned about vibration, so I introduced the Penske Separate handle.
Replacement from DAYTONA heavy weight bar end.

Was the one you received as per Image?
Just like the image. I felt that it was heavy and would eliminate vibration.

Was the installation difficult?
It's not a difficult job since it's just a matter of inserting it into the Handlebar, but since the connection was quite loose, I wrapped some Vinyl Tape around it to make the connection a little tighter and inserted it.
I used ZETA's Bar End, but the mounting bolt was not long enough, so I had to use Plus head pot screw. (Stainless Steel) It was installed using

How was your experience with it?
It stopped the vibration well, so I was satisfied with the Large variation.
Rather than using the heavy weight bar end to stop the vibration, I used this product to stop the vibration. I felt that this product stopped the vibration better than the Heavy weight bar end.
Recommendations for single-cylinder and two-cylinder motorcycles that are concerned about Handlebar vibration.
We recommend that you take measures to prevent vibration, because if your hands become numb, you will not be able to ride safely.

[Included Parts:were they on?
None

[Was there anything that disappointed you?
A place where the intuition is a little loose.

[ITEMS TO BUY TOGETHER
Bar end plug
Longer Bolt View detail

Handlebar End Spacer (Collar)
AELLA
Handlebar End Spacer (Collar)

Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus

Japanese Webike user
jp
3/5

I honestly don't know.

The vibration became much larger when the RPM was around the alternative 4000 or so, and it became numb when moving at high speed, but it was still numb with this on.
I sometimes think it might be a little better, but it might just be my mood, and my hands end up numb, so I thought I would regret buying this thinking it would solve my problem. View detail

ตุ้มปลายแฮนด์แบบยาง
DAYTONA
ตุ้มปลายแฮนด์แบบยาง
Pol
th
5/5

สินค้าตรงตามภาพตัวอย่าง เนื้อยางคุณภาพดี ลองซื้อมาคู่แรกเพื่อทดลองใช้ ใช้งานดีมากๆ ใช้งานกันไปยาวๆ เลย View detail

Heavy Weight Nut
POSH
Heavy Weight Nut

Fits: Others

Japanese Webike user
jp
4/5

Periodic tightening!

The slight vibration while driving has been significantly reduced. There are no difficult points to install, and anyone can do it.
As stated in the instruction manual, it needs to be retightened periodically. In the past, I had a large noise while driving, and when I checked it out, I found that the handlebar was vibrating and making a noise due to the looseness of this product. Tightening this product fixed the problem, so it is recommended to tighten it regularly. View detail

Handlebar End Spacer (Collar)
AELLA
Handlebar End Spacer (Collar)

Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus

Japanese Webike user
jp
3/5

I don't know if it'll work over short distances.

I did not know the effect in about 2 hours of 40km round trip down the road. I would like to write an impression again when I ride for a long time at high speed. View detail

[Bar End Repair Parts] Stop Rubber
POSH
[Bar End Repair Parts] Stop Rubber
Japanese Webike user
jp
3/5

Replace only one side

The Rubber on my Ultra heavy par end was getting ragged so I replaced it. This time it was only one side, the other side seemed to be able to go somehow so I decided to use it some more.
I wondered if I could substitute something else, but I couldn't find anything suitable, so I had no choice but to buy one.
It's a good idea to use a rubber collar on the outside of the handlebar. It is not impossible to go without the rubber, but it is better to have it. I hope that the manufacturer will make it possible to use a thicker rubber, or make it possible to fasten without rubber. View detail

Handlebar End Spacer (Collar)
AELLA
Handlebar End Spacer (Collar)

Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus

Japanese Webike user
jp
5/5

Effective

It is a vibration control product that is installed in an almost invisible part. I am using Heavy Weight Bar End and Aluminum Handlebar. Do you think it'll work? But I tried to incorporate it.
Honestly… it works! The vibration that was coming out of the Handlebar has been controlled.
The price is relatively cheap, so it's easy to try.
However, as the vibration of the Grip seems to have been suppressed, the vibration of the Lever has started to bother me (laughs). View detail

Handlebar End Spacer (Collar)
AELLA
Handlebar End Spacer (Collar)

Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus

Japanese Webike user
jp
4/5

Worth a try.

I put it on my Initial ModelS1000RR.
Very easy to install
I heard that the direction of the groove is Bar End side.

The effect is that the vibration does not disappear, but it becomes Mild.
When combined with the heavy weight Bar End, the vibration in the rpm range used for touring is almost unnoticeable. View detail

[Bar End Repair Parts] Stop Rubber
POSH
[Bar End Repair Parts] Stop Rubber
Japanese Webike user
jp
4/5

It's a consumable part, so it's better to have a spare.

I bought this as Repair Parts because my Ultra heavy bar end Sleeve was cracked and deformed.
The width of the car is not quite enough, so I have to move the Bar End to widen it, but every time I tighten it again, it gets deformed. Originally, once it is installed, it is not likely to be removed, but I guess it is rare when the car is inspected.
Product Evaluation
This product is a thin synthetic rubber tube, which is used as a friction material between the aluminum sleeve and the pipe handle.
Due to the nature of the rubber, if you tighten it, it will crush and stretch, making it sticky.
The outer diameter of the Strap bar is very close to the inner diameter of the Handlebar, so if it is stretched, it will not fit in the Pipe handle and cannot be assembled.
I take it off and put it back on, so I stop tightening the bolt when it stops working because I don't want it to get crushed, but even so, it will last 3-4 times.
Installation
When you buy this is when the one you were using is ruined, so it is quite deformed, but when you disassemble it, it is better to buy it in advance on the premise of basic replacement.
The first one is not crushed, so if you don't hook it, you will be able to put it in Smooth.
If you have difficulty, you can apply a volatile cleaning solution (Parts cleaner), etc. to make it easier to slide in.
Never put oil on it, it is a friction material and it will slip and not stop and the Bar End itself will fall out (I did that once). View detail

[Bar End Repair Parts] Aluminum Sleeve
POSH
[Bar End Repair Parts] Aluminum Sleeve
Japanese Webike user
jp
4/5

I like that it's out as Repair Parts.

The width of the car is not quite enough, so I have to move the Bar End to widen it, but every time I tighten it again, it gets deformed. Originally, once it is installed, it is not likely to be removed, but I guess it is rare when the car is inspected.
This time it was cracked and broken, so I replaced it to bring it back after the inspection.
It is a good product that can be repaired because Repair Parts is out as Lineup.
In addition, I can use it for a long time because it is not discontinued though a lot of years have passed since it was put on the market.
I was worried that I should replace the Heavy weight bar end because the similar product of Heavy weight bar end is out from DAYTONA, but I decided not to replace this Repair Parts because the price setting is cheap.
Product Evaluation
It's a pity that this product is made of aluminum and is easily deformed due to its thin thickness, but it seems to be an unavoidable design in order to follow the surface in the Handlebar.
About installation
When you buy this, it's when the one you were using is ruined, so it's quite deformed and you'll probably struggle to remove it.
If you can loosen the bolt somehow, you can bend the aluminum sleeve inside with pliers and release the bolt.
After that, it becomes possible to restore and assemble it by replacing it.
Forced bending is likely to break, so it is better to do it with attention little by little. View detail

Ultra Heavy Bar End Outer
POSH
Ultra Heavy Bar End Outer
Japanese Webike user
jp
5/5

Exchange with the thing damaged by the fall etc. etc.

This is for Replacement when you sadly (mysteriously) let it fall over.

Of course, you can change the color according to your mood.

The reason why I chose POSH is because the anodized finish does not fade easily.

The image shows an item that has been used for one year, but has not faded at all.

POSH is excellent.

The video will be attached to the appropriate one. View detail

Ultra Heavy Bar End Outer
POSH
Ultra Heavy Bar End Outer
Japanese Webike user
jp
5/5

restoration of standing moss

Thank God only Gawata was out. (Polish)

You can change the color according to your mood. View detail

Ultra Heavy Bar End Outer
POSH
Ultra Heavy Bar End Outer
Japanese Webike user
jp
4/5

Easy exchange

The paint on the original Outer Cover is peeling off.
Bought the Outer only because it looked so pathetic.
Because you can purchase a Single Item of each color Cover, you can change your preference and
Can be purchased depending on the situation, such as damage caused by a fall.
Parts are also available from Outer Cover to Bolt and Inner.
It's great to be able to exchange without having to buy everything from scratch, so you don't have to waste more stuff.
I don't remember doing anything to damage the paint at all, like falling over.
I'm not happy with the fact that the paint came off so easily, but it was easy to deal with.
This is good if you want to continue using Bar End. View detail

Handlebar End Spacer (Collar)
AELLA
Handlebar End Spacer (Collar)

Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus

Japanese Webike user
jp
1/5

On a long distance using the highway.

After driving 50km on the highway, I took a break at the interchange and my hands went numb … I thought it was a completely eyebrow-raising product. I think it would have been better to take it off and drive with less vibration … View detail

[Bar End Repair Parts] Solid Bar End Rubber S
POSH
[Bar End Repair Parts] Solid Bar End Rubber S
Japanese Webike user
jp
3/5

I used it for Baby's Bar End.

[How is it used?
I used it on a Babyface M6Bar End, Handlebar inner diameter is 17φ.

Was the one you received as per Image?
Image is nothing, it's just a tube of Rubber.

How was your experience with it?
The inner diameter is 17φ I was not sure if it would work, but I was able to twist it in and fix it without any problems.

[Points to note]
Not particularly View detail

Handlebar End Spacer (Collar)
AELLA
Handlebar End Spacer (Collar)

Fits: Others , BMW S1000R, BMW S1000XR, DUCATI SUPER BIKE 899 Panigale, DUCATI SUPER BIKE 1198, DUCATI SUPER BIKE 1098, DUCATI SUPER BIKE 848, DUCATI SUPER SPORT 939, DUCATI CLASSIC MH, DUCATI SUPER BIKE PanigaleV4, DUCATI SUPER BIKE PanigaleV4R, DUCATI MULTISTRADA 1260, DUCATI SCRAMBLER 1100, BMW G310R, BMW S1000RR, BMW G310GS, DUCATI Diavel1260, DUCATI MULTISTRADA V4, DUCATI SUPER SPORT 950, DUCATI Monster Plus

Japanese Webike user
jp
2/5

Hmmm…

I don't know if this is working or not…
Well, it's cheap, so I guess it's just a comfort.
And my hands usually go numb from spinning it around. View detail

Heavy Weight Nut
POSH
Heavy Weight Nut

Fits: Others

Japanese Webike user
jp
5/5

Measures against fine vibration in single-cylinder engines

What made you decide to buy?
The vibration of the single cylinder engine also affects the Handlebar. In addition, when waiting at a traffic light, if the front brake is not applied, the Mirror "Wobbly wobbly. I think that's how much the vibration of the Engine affects the Handlebar. That's how much the vibration of the Engine is affecting the Handlebar. I bought this to reduce the vibration.

How was your experience with it?
Before installation, when waiting at a traffic light, if the front brake is not applied, the Mirror "Wobbly wobbly. I think that the symptoms that I was experiencing are now less severe than before I had it installed.
PartsThe feeling after installation will change depending on the individual difference of the vehicle and the feeling of the user, so please use it as a reference.

[Hope to Manufacturer
The thing is that there were only settings for M8 and M5.

What is the point or hang of the installation?
This time, I bought one for M5Nut because I changed to Bar end mirror.
When I installed the one for M5Nut to the Bar end mirror, ・・・・Bar end mirror was Bolt of M6, and it was my regretful lack of confirmation. (Reflection) If this is not done, the Heavy weightNut which I purchased cannot be used. So I checked if I could change the bolt of Bar end mirror to M5, but I couldn't find M5 bolt length to fit Bar end mirror. I was about to give up on the heavy weight nut installation, when I suddenly thought that it would be possible to install the M6 Tap. I was able to install the heavy weight Nut M6 Spec. on the Bar end mirror. View detail

[Bar End Repair Parts] Solid Bar End Rubber
POSH
[Bar End Repair Parts] Solid Bar End Rubber
Japanese Webike user
jp
5/5

Bar End for Repair

I bought this product because I changed my Handlebar. I was using another company's product, for OEM HandlebarBar End, but I could not install it as it was, so I bought this product and succeeded in installing it.
It is a special product and the fit feeling is good. It does not wobble. View detail