Reviews
![[Repair Parts]DURACON(R) Slider for Vibration Absorption Lever Guard](https://img.webike-cdn.net/catalogue/images/56303/pom2_1_TS.jpg)
Fits: Others
I bought this as a supplement.
I bought it the summer before last and have had quite a few falls.
Finally, the original round shape was gone, and I decided to buy it again in a Potato-like shape.
As far as I can remember, I fell 7 times on Right and 9 times on Left with SlipDown system, but the Screw hole did not collapse and the vehicle body slid and missed Damage.
I think Slider does a good job including Material.
View detail
Hand guard is not so cool.
I was looking for a different hand guard for my 701SUPERMOTO hand guard because it was too large and not cool enough, and I found this product.
Handlebar inner diameter is 14mm.
All you have to do is remove and replace it, so the process is quick and easy.
I think the Handlebar vibration is suppressed because the Lever Guard tip is shaking when Idling, maybe.
I have no idea how much change there is from the original, since the purpose is to change from the OEM hand guard and not to reduce the vibration of the handlebar.
Refreshing the handlebar area is the most pleasant change.
It is quite solid and seems to protect the handlebar area even if it falls over in the Circuit, although I don't want to experience the effect.
View detail
Fits: YAMAHA YZF-R3, SUZUKI KATANA, YAMAHA MT-03, SUZUKI GSX-R1000, MV AGUSTA F3 675, Others , MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XMAX250, YAMAHA XSR155, YAMAHA YZF-R25, HONDA CBR250RR, HONDA CBR650R, HONDA CB400SF, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
Made by YOSHIMURA for peace of mind
Used for YAMAHA XSR155
It is a product of YOSHIMURA, so the manufacturing is top notch.
It will be fun to ride Motorcycle again.
View detail
Fits: SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XSR155, Others , SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom250, HONDA CBR250RR, YAMAHA YZF-R25, HONDA CBR1000RR-R, HONDA CB1300SB, HONDA CB1300SF, YAMAHA XMAX250, SUZUKI GSX-R125, HONDA CB400SF
OVER RACING : Sports Riding Handlebar Kit ∅ 14
Aluminum gives points to each color. And it can also protect the brakes when the bike falls. You have to buy a clutch guard or a handle Accessory Bar Ends because it only consists of a brake guard. Installation is easy as long as it fits the size. Delivery and packaging to WeBike in a week The packaging is expensive because it only costs a great brake guard. However, the quality is high View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
Stable YOSHIMURA.
As expected of "YOSHIMURA" in the world. The quality of production &installation &quality is the highest quality with high precision!
I am currently using four YOSHIMURA Parts on my GSX-R1000R, and I have no doubt about any of them.
This Color:I had a hard time deciding between Gray and Blue until the end, but I didn't want to stand out " so I went with Color:Gray.
The Bar End on the Left Side is also going to be in the same color.
(I thought it would be too assertive if both Right Side Lever Guard&Left Side Bar End were Blue)
The body of the car stands out, so the parts are understated. (Lol)
Installation is not difficult, but it would be better to use a large-tightened spanner or MONKEY Wrenchetc. for tightening the Adapter. It would be better to wrap Vinyl Tape around the Adapter to prevent the Wound from sticking to the Adapter.
Visual is great, so I am Large satisfied!
It would be nice if it were a little less expensive, though, (Sweat)
View detail
Fits: SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XSR155, Others , SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom250, HONDA CBR250RR, YAMAHA YZF-R25, HONDA CBR1000RR-R, HONDA CB1300SB, HONDA CB1300SF, YAMAHA XMAX250, SUZUKI GSX-R125, HONDA CB400SF
Expensive But Good Quality Guard
I purchased this guard after the bike skidded. Although it was a minor mishap without any injuries. I damaged the brake lever and it didn't brake as smoothly as it originally did. Moving forward, I decided that if I happen to tip over the bike or have any mishaps, this brake lever guard was going to bear the brunt of the impact. When I unboxed it, the feel of it and build quality impressed me and indeed could see where the cost went to. I wanted to buy a clutch lever guard but unfortunately Yoshimura did not make them. It would have completed the look. I would recommend this product to someone who wish to protect their bike from those accidental tip over scenarios. View detail
Fits: BMW HP 4, BMW R nineT Pure, BMW R nineT Pure, BMW R nineT Racer, BMW R nineT Scrambler, BMW R nineT Scrambler, BMW R nineT Urban G/S, BMW R nineT Urban G/S, BMW R nineT, BMW R nineT, BMW R nineT, BMW S 1000 R, BMW S 1000 R, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, BMW S 1000 RR, SUZUKI GSX-R 1000 R, SUZUKI GSX-R 1000
Genuine Gilles Tooling Brake Lever Guard for GSX-R1000
This bike was going to have it's first track day and needed by UK track rules that a lever guard must be fitted. There a re a lot of brands out there that provide the same kind of lever guard but this was the specific brand the cutomer wanted. Findingf the right part ws not hard as I just used the tools Webike provide in their help section and then cross referenced with Gilles Tooling website. The price was fairly average but as I was already ordering some items from Webike, I decided to get this lever guard as well. My preferred courier is EMS as they just get my orders to me fast. This prder arrived in 5 days from being shipped. The lever guard came in the standard Gilles box and came with a host of instructions and all fittings needed. The lever guard itself is a very well machined part. The precision is superb, it has a lovely finish which is very tactile. It already comes with a bar end fitment and is a 2 part guard. Thsi is a very sturdy part and would take a lot of force to hinder the actual brake lever which it protects. Very happy with this purchase and it fitted really easily as you would expect from Gilles Tooling. Thanks Webike. View detail
Fits: SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XSR155, Others , SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom250, HONDA CBR250RR, YAMAHA YZF-R25, HONDA CBR1000RR-R, HONDA CB1300SB, HONDA CB1300SF, YAMAHA XMAX250, SUZUKI GSX-R125, HONDA CB400SF
Yoshimura Brake Lever Guard
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike. View detail
Fits: HONDA glom, HONDA MONKEY125
Single cylinder as comfortable as possible.
It was installed to improve the vibration of a single cylinder Handlebar as much as possible.
Since I have a Bar end mirror, I didn't think Weight would be attached, so I decided to use this Parts.
It is co-tightened with DAYTONA's Hi-Sider & Adapter and is Large sturdy.
View detail
Babyface Lever Guard
About quality and texture Strong steel will black smooth surface. About the feeling of use Looks great. Not too huge looking as the other brands. Looks sleek. No cheap material look. Products to buy together Babyface long bar end. Difficulty of installation Easy to install. Maybe I take a while to adjust the level which you feel comfortable and protecting the level from breaking. Cost performance and comparison with other products Cost is reasonable as all the babyface products. Good quality. Unlike expensive Italy brands is almost twice the price but same quantity. About shipping and packaging Small package will do. Can order with other small items. Well pack with plastic package. Any concerns, cautions, or advice when purchasing Drop once my motorcycle before and its able to to protect my level from breaking but these a possibility to use back the level protector again is you are able to bend it back and re-coat the paint paint again. But then again you can alway purchase a new one as the price is reasonable. My level did got scratched during the drop but it sires protects it from breaking. View detail
Fits: KAWASAKI Ninja250, KAWASAKI Ninja250, KAWASAKI , KAWASAKI Z650RS, KAWASAKI Ninja400, KAWASAKI Ninja250R, KAWASAKI Ninja400, KAWASAKI ZRX1200DAEG, KAWASAKI Z900RS, KAWASAKI Z1000, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-25R, KAWASAKI ZX-4RR, KAWASAKI ZX-4R SE
Race ish look and feel
When switching to a 24-model ZX-6R, we decided to install Lever Guard to make it look like a race ish.
After much deliberation over which one to choose, we selected the Trickster one, which also comes with Clutch Side ends.
I thought it would be difficult to remove the screw lock because it was sticky, but it came off easily, and when I looked at it, there was no screw lock applied.
I don't know if this is the kind of Spec. in the 24 year MODEL or if it was a construction error (laughs).
As for the installation of the lever guard, I had prepared it because I read in a review that the throttle would be fixed if the spacer was not installed, but there was no problem with the throttle operation without using the spacer. However, there was no problem with the throttle operation without using Spacer.
Please note that there may be individual differences in this area.
Length adjustment is OEMLever, there is no interference at the shortest position.
Also Quantity:Pair (for Left and Right) to turn off Handlebar does not interfere with Cowl.
Since we are still in the break-in stage and are tied down to 4,000 rpm, we have not noticed much change in the vibration transmitted to the handlebar, but we will re-review if we notice anything after the break-in stage is over and we can rev it to higher rpm.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI Z900, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-6R, KAWASAKI ELIMINATOR, KAWASAKI Z650RS, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Also available for 2023 MODEL
I liked the variety of colors and being able to choose my preference. View detail
Fits: KAWASAKI NINJA ZX-25R, KAWASAKI NINJA250R, KAWASAKI NINJA250, KAWASAKI Z250, KAWASAKI ER-4N, KAWASAKI NINJA400R, KAWASAKI NINJA400, KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI NINJA650R, KAWASAKI NINJA650, KAWASAKI ZX-6R, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z800, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z1000, KAWASAKI NINJA1000
SNIPERSNIPERMaterial:AluminumBrake Lever Guard
I wanted to use Carbon, but it will not be in stock for 6 months, so I decided to use full Gold Spec. View detail
Fits: MV AGUSTA F3 675, SUZUKI GSX-R1000, SUZUKI KATANA, YAMAHA MT-03, YAMAHA YZF-R3, Others , KAWASAKI Ninja650, MV AGUSTA F3 800 RC, YAMAHA XSR155, YAMAHA YZF-R25, YAMAHA XMAX250, HONDA CB400SF, HONDA CBR250RR, HONDA CBR650R, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
If only we could get past Inner Weight!
I bought YOSHIMURA Rear Sets, so I wanted to make the handlebar part the same gun metallic color, so I installed it myself as a decoration. Once the inner weight was removed, installation was a piece of cake. It looks cool now. The weight will be a little lighter, but it is only 13g, so I don't think it will have that much effect on the weight. View detail
Fits: KAWASAKI , KAWASAKI ZX-10R, KAWASAKI ZX-25R, KAWASAKI ZX-6RR, KAWASAKI ZX-4R
SUPERNOW has been wonderful to deal with.
The hole diameter was not correct and when I contacted them, they immediately replied that they would send the correct product.
He also guessed that a long Bolt was needed for the adjustment and enclosed it as well.
I thought it would take a long time since the response was by email, but I was surprised at the fairly quick response.
I would like to ask for more in the future.
View detail
Fits: MV AGUSTA F3 675, SUZUKI GSX-R1000, SUZUKI KATANA, YAMAHA MT-03, YAMAHA YZF-R3, Others , KAWASAKI Ninja650, MV AGUSTA F3 800 RC, YAMAHA XSR155, YAMAHA YZF-R25, YAMAHA XMAX250, HONDA CB400SF, HONDA CBR250RR, HONDA CBR650R, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
First of all, Cool.
Throttle operation is not affected at all.
Now it's up to the car inspectors. (Full width)
View detail
Babyface Lever Guard
About quality and texture Hard aluminum feel. Looks sturdy and able to restand drop I guess. About the feeling of use Length is adjustable. Able to fit together with my gale speed brake pump and clutch original length Products to buy together Bought together with babyface end bars that fits directly to the original handlebar. Difficulty of installation Easy to installation with less then ten minutes. Cost performance and comparison with other products Price and outlook will not be losing out to other competitors brand. About shipping and packaging Well plastic packaging. No issue when received item Any concerns, cautions, or advice when purchasing Need to find matching end bars for your bike. If it fits no issue installing the guard. There's a bit of gap on the Original handle bar. But I think it's not an issue. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, HONDA CB400SF, HONDA CB400SB, HONDA VTR250, HONDA VTR1000 SP1, HONDA VTR1000 SP2, HONDA VFR750R, HONDA VFR800, HONDA RVF400, HONDA NC700X, HONDA NC750, HONDA NC700S, HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR250R, HONDA CBR250RR
Installed to make it look Race ish!
Installed on CBR600RR this time.
I installed the Lever Guard because I thought it would make the car look more race-ready!
Originally, it was designed to prevent the brake lever from falling over during a race when it made contact with another car.
We do not know if it will protect Lever in the event of a fall.
If I wanted to install this, I would need to replace the Handlebar End with one made by BabyFace.
The Bar End and Lever Guard by BabyFace were installed to make it a much more race ish!
I am satisfied with both the appearance and quality.
I don't know if it will be Demerit, but the Gold amount seems a little high.
View detail
Fits: その他
Handlebarfor Replacement
I purchased this product to change the handlebar diameter when replacing a MORIWAKI handlebar with a ZETA handlebar. This product is a recommendation because there are many different types of Adapters to fit any handlebar diameter, so you can easily change the handlebar. View detail
In the Handlebar of SUPERNow.
I think the color of SUPER NOW Lever Guard is good for SUPER NOW Racing Handlebar. View detail