Reviews
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
SDGS
Repair Parts has not been replaced in over a year and is not recommended. View detail
Fits: YAMAHA YZF-R3, SUZUKI KATANA, YAMAHA MT-03, SUZUKI GSX-R1000, MV AGUSTA F3 675, Others , MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XMAX250, YAMAHA XSR155, YAMAHA YZF-R25, HONDA CBR250RR, HONDA CBR650R, HONDA CB400SF, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
Made by YOSHIMURA for peace of mind
Used for YAMAHA XSR155
It is a product of YOSHIMURA, so the manufacturing is top notch.
It will be fun to ride Motorcycle again.
View detail
Fits: SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XSR155, Others , SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom250, HONDA CBR250RR, YAMAHA YZF-R25, HONDA CBR1000RR-R, HONDA CB1300SB, HONDA CB1300SF, YAMAHA XMAX250, SUZUKI GSX-R125, HONDA CB400SF
OVER RACING : Sports Riding Handlebar Kit ∅ 14
Aluminum gives points to each color. And it can also protect the brakes when the bike falls. You have to buy a clutch guard or a handle Accessory Bar Ends because it only consists of a brake guard. Installation is easy as long as it fits the size. Delivery and packaging to WeBike in a week The packaging is expensive because it only costs a great brake guard. However, the quality is high View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
Stable YOSHIMURA.
As expected of "YOSHIMURA" in the world. The quality of production &installation &quality is the highest quality with high precision!
I am currently using four YOSHIMURA Parts on my GSX-R1000R, and I have no doubt about any of them.
This Color:I had a hard time deciding between Gray and Blue until the end, but I didn't want to stand out " so I went with Color:Gray.
The Bar End on the Left Side is also going to be in the same color.
(I thought it would be too assertive if both Right Side Lever Guard&Left Side Bar End were Blue)
The body of the car stands out, so the parts are understated. (Lol)
Installation is not difficult, but it would be better to use a large-tightened spanner or MONKEY Wrenchetc. for tightening the Adapter. It would be better to wrap Vinyl Tape around the Adapter to prevent the Wound from sticking to the Adapter.
Visual is great, so I am Large satisfied!
It would be nice if it were a little less expensive, though, (Sweat)
View detail
Fits: SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XSR155, Others , SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom250, HONDA CBR250RR, YAMAHA YZF-R25, HONDA CBR1000RR-R, HONDA CB1300SB, HONDA CB1300SF, YAMAHA XMAX250, SUZUKI GSX-R125, HONDA CB400SF
Expensive But Good Quality Guard
I purchased this guard after the bike skidded. Although it was a minor mishap without any injuries. I damaged the brake lever and it didn't brake as smoothly as it originally did. Moving forward, I decided that if I happen to tip over the bike or have any mishaps, this brake lever guard was going to bear the brunt of the impact. When I unboxed it, the feel of it and build quality impressed me and indeed could see where the cost went to. I wanted to buy a clutch lever guard but unfortunately Yoshimura did not make them. It would have completed the look. I would recommend this product to someone who wish to protect their bike from those accidental tip over scenarios. View detail
Fits: SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XSR155, Others , SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI V-Strom250, HONDA CBR250RR, YAMAHA YZF-R25, HONDA CBR1000RR-R, HONDA CB1300SB, HONDA CB1300SF, YAMAHA XMAX250, SUZUKI GSX-R125, HONDA CB400SF
Yoshimura Brake Lever Guard
The brake lever guard looks sleek and material are of high quality expected from yoshimura. Sadly they don't make a clutch lever guard too. It would be great if they have it so it would look symmetrical on the bike. View detail
Fits: KAWASAKI GPZ900R, KAWASAKI Z900, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja ZX-6R, KAWASAKI ELIMINATOR, KAWASAKI Z650RS, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-4R SE, KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja250, KAWASAKI Ninja400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
Also available for 2023 MODEL
I liked the variety of colors and being able to choose my preference. View detail
Fits: MV AGUSTA F3 675, SUZUKI GSX-R1000, SUZUKI KATANA, YAMAHA MT-03, YAMAHA YZF-R3, Others , KAWASAKI Ninja650, MV AGUSTA F3 800 RC, YAMAHA XSR155, YAMAHA YZF-R25, YAMAHA XMAX250, HONDA CB400SF, HONDA CBR250RR, HONDA CBR650R, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
If only we could get past Inner Weight!
I bought YOSHIMURA Rear Sets, so I wanted to make the handlebar part the same gun metallic color, so I installed it myself as a decoration. Once the inner weight was removed, installation was a piece of cake. It looks cool now. The weight will be a little lighter, but it is only 13g, so I don't think it will have that much effect on the weight. View detail
Fits: MV AGUSTA F3 675, SUZUKI GSX-R1000, SUZUKI KATANA, YAMAHA MT-03, YAMAHA YZF-R3, Others , KAWASAKI Ninja650, MV AGUSTA F3 800 RC, YAMAHA XSR155, YAMAHA YZF-R25, YAMAHA XMAX250, HONDA CB400SF, HONDA CBR250RR, HONDA CBR650R, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
First of all, Cool.
Throttle operation is not affected at all.
Now it's up to the car inspectors. (Full width)
View detail
Fits: MV AGUSTA F3 675, SUZUKI GSX-R1000, YAMAHA YZF-R3, YAMAHA MT-03, SUZUKI GSX-S1000F, HONDA CB1300SF, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CBR650R, HONDA CB400SF, HONDA CBR250RR, YAMAHA YZF-R25, YAMAHA XMAX250, YAMAHA XSR155, KAWASAKI Ninja650, MV AGUSTA F3 800 RC, YAMAHA MT-125, YAMAHA YZF-R125, YAMAHA YZF-R15, SUZUKI V-Strom250
Parenthesis good!
Anyway, it looks Parenthesis good!
Since I am not going to Race, I put it on with Dress-up.
Combined with the Brand YOSHIMURA, the satisfaction level is high.
I think the color of Blue was a little lighter than Image. Well, that is not good or bad, as it depends on the individual.
The weight is about 160 g. I chose a similar weight for the Left Bar End.
I installed it on a cbr250rr, but please be careful when referring to it as it has been replaced with a Handlebar from Over RACING.
View detail
Fits: KAWASAKI GPZ900R, KAWASAKI Ninja ZX-10R, KAWASAKI Z900, KAWASAKI Ninja ZX-6R, KAWASAKI Z650RS, KAWASAKI ELIMINATOR, KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4R RR, KAWASAKI Ninja ZX-25R, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Ninja400, KAWASAKI Ninja250, KAWASAKI Z400, KAWASAKI Z250
Feels cheap, not the best finish.
About quality and texture - not the best quality for price. About the feeling of use - feels ok Cost performance and comparison with other products - Too pricey. View detail
Yoshimura brake lever fan
I have a lot of trust in the Yoshimura brand.
and the design is pretty
I can't say the price is cheap, but I don't think it's expensive either.
The Yoshimura red point suits my silver bike very well, and I really like it for ornamental purposes rather than functionality.
-------------------------------------------------- -------- I trust Yoshimura brand a lot And the design is pretty The price is never cheap, but I don't think it's expensive. Yoshimura Red Point suits my silver adverb bike so well and I like ornamental rather than functionality Powered by Google Translator
View detail
Fits: SUZUKI GSX-R1000, SUZUKI KATANA, YAMAHA MT-03, YAMAHA YZF-R3, MV AGUSTA F3 675, SUZUKI V-Strom1000, SUZUKI GSX-S1000GT, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000, SUZUKI KATANA, MV AGUSTA F3 800 RC, YAMAHA XSR155, KAWASAKI Ninja650, SUZUKI GSX-R125, SUZUKI V-Strom250, SUZUKI GIXXER SF250, SUZUKI GIXXER SF250, SUZUKI SV650(ABS), SUZUKI SV650(ABS)
Look good!
I personally don't race, but I really wanted it because of the way it looked, so I bought it.
As I had expected, YOSHIMURA's Lever Guard is good in both shape and texture, and I am pleased with the Large change self.
I feel like a Racer (laughs).
I don't expect it to have much of an effect, but it adds to the atmosphere and looks good anyway!
(It was difficult to remove the bar end, but the installation itself is surprisingly easy.)
View detail
Fits: YAMAHA MT-03, YAMAHA YZF-R3, SUZUKI KATANA, MV AGUSTA F3 675, SUZUKI GSX-R1000, SUZUKI GIXXER SF250, SUZUKI SV650(ABS), SUZUKI SV650(ABS), SUZUKI SV650, YAMAHA YZF-R25, HONDA CBR250RR, SUZUKI GSX-R125, SUZUKI GSX-R125, HONDA CBR650R, HONDA CB400SF, HONDA CBR1000RR-R, HONDA CB1300SB, SUZUKI KATANA, SUZUKI GSX-S1000, HONDA CB1300SF
Not only is it functional, but it looks great!
YZF-R25.
The rigidity and texture are both excellent.
They will also serve perfectly as SafetyParts.
It never faded and is still shining after several months.
View detail
Fits: YAMAHA YZF-R3, SUZUKI KATANA, YAMAHA MT-03, SUZUKI GSX-R1000, MV AGUSTA F3 675, Others , MV AGUSTA F3 800 RC, KAWASAKI Ninja650, YAMAHA XMAX250, YAMAHA XSR155, YAMAHA YZF-R25, HONDA CBR250RR, HONDA CBR650R, HONDA CB400SF, HONDA CB1300SB, HONDA CBR1000RR-R, HONDA CB1300SF, SUZUKI GSX-R125, SUZUKI GSX-R125, SUZUKI V-Strom250
I adore Racer … lol.
Since it's a Racer warrant, I put it on like it looks first!
It looks and feels perfectly Psycho!
However, only the Right hand is somewhat numb due to the bar weight being removed and attached lol.
View detail
The texture was great.
[How is it used?
Street Riding Main
Was the one you received as per Image?
Image
Was the installation difficult?
Very easy.
I don't plan to participate in any races, but I definitely want to install the parts for HAYABUSA that YOSHIMURA sells, so I installed them.
The texture is great.
We are currently using POSH heavy weight for the Left Side Bar End and are wondering if we should switch back to OEM.
Quantity:Pair (for Left and Right) RightYOSHIMURA and LeftOEM may be better considering the Balance of
View detail
Satisfied
"I'm a fan of Yoshimura.
That's why I like and trust all of Yoshimura's products.
I like this product as well as the packaging and the sticker.
I'm glad it looks like a great fit for my hayabusa bike
I ordered only the right one, but couldn't find the left one.
I don't know if I couldn't find it or if there is only the right product
If there is only the right side, I would like the left side to be released as well
-------------------------------------------------- -------- I'm a fan of Yoshimura So I like and use all of Yoshimura's products This product also likes both packaging boxes and stickers. I'm happy to be very well suited to my Hayabusan bike I ordered only the right product and I couldn't find the left side. I don't know if I couldn't find it or it was the product with only the right If there is only the right, I want to release the left side. Powered by Google Translator"
View detail
Very satisfied with the natural fit.
I was looking for a Red Bar End for my GSX1300R HAYABUSA (EJ11A) and I found this Brake Lever Guard from YOSHIMURA. I am very satisfied with the quality of YOSHIMURA's products, which all come in a black box.:Pair (for Left and Right) I wanted YOSHIMURA to produce the Clutch Side as a unification of the design of YOSHIMURA. View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
As expected from YOSHIMURA.
The quality is top notch and is made by Yoshimura.
A few things that bother me? The color of the Bar End on the inside of the installation does not match the color of the Bar End on the outside.
I installed a similar colored POSH one to match the color.
One more thing:there was a place where I needed a 24mm Spanner, and it had a Torque designation.
I have a torque wrench that can use a 24mm socket, but I don't have a spanner type wrench, so I applied a screw lock and used a MONKEY. "Is that about right?" I closed it like that.
Other than that, the box is a high quality box and I have kept the empty box without throwing it away! (Lol)
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-8S
It's broken
Installed as a spell for Circuit driving.
There was a problem with my handling, but the Lever Guard tip is Material:It is plastic and was broken by force while moving the motorcycle.
There were repair parts only for the tip of the Lever Guard, but they were expensive, so I changed to other products made by the genus Gold.
View detail